Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
No network after 5.99.5 to 5.99.7 upgrade (fxp, dhclient problems)
Hi,
after booting a 5.99.7 kernel on i386 dhclient is no longer willing
to obtain a lease for a IP adress from its server.
As far as I can see, the corresponding DHCPREQUEST,DHCPDISCOVER etc
frames never leave my fxp network card (at least are not seen on
another machine on the same network).
All traffic that comes in over the card seems to be garbled,
i.e. only nonsense data comes in, if data comes in at all (less data
than what should be there is reported by tcpdump).
And, yes, COMPAT_50 is in the kernel.
Old and new userland seem to react the same (dhclient).
Has there been any other change that may cause this behaviour?
Has anybody else seen this?
dmsg of 5.99.7 boot is attached, as well as kernel config.
The only diff in 5.99.5 vs. 5.99.7 dmesg output ist the ordering of enumeration
of the uhub* ...
Best regards.....
Stephan
============= DMESG ==========================
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.7 (XXXXXXXXX) #3: Sat Feb 14 21:55:44 CET 2009
root@XXXXXXXXX:YYYYYYYYY
total memory = 1023 MB
avail memory = 1001 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2411MHz, id 0xf29
cpu1 at mainbus0 apid 1: Intel 686-class, 2411MHz, id 0xf29
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <GBT ,AWRDACPI,42302e31>, AslId <AWRD,01010101>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpi: activated PNP0C0F
acpi: activated PNP0C0F
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer0 at acpi0 (TMR, PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
pcppi0 at acpi0 (SPKR, PNP0800)
pcppi0: io 0x61
sysbeep0 at pcppi0
npx0 at acpi0 (COPR, PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: reported by CPUID; using exception 16
fdc0 at acpi0 (FDC0, PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
com0 at acpi0 (UAR1, PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
com1 at acpi0 (UAR2, PNP0501-2)
com1: io 0x2f8-0x2ff irq 3
com1: ns16550a, working fifo
ECP1 (PNP0401) [ECP printer port] at acpi0 not configured
FAN (PNP0C0B) [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 72.8C critical 75.8C passive
21.8C
apm0 at acpi0: Power Management spec V1.2
attimer0: attached to pcppi0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82865 Host (rev. 0x02)
pchb0: returns constant 0xff stream, RNG disabled.
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: Intel 82865 AGP (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Matrox MGA G550 AGP (rev. 0x01)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
mgadrm0 at vga0info: [drm] Matrox G550 (AGP)[drm:pid0:drm_load]
[drm:pid0:drm_agp_init] agp_available = 1
info: [drm] AGP at 0xd0000000 256MB
[drm:pid0:drm_ctxbitmap_next] drm_ctxbitmap_next bit : 0
[drm:pid0:drm_ctxbitmap_init] drm_ctxbitmap_init : 0
info: [drm] Initialized mga 3.2.2 20060319
uhci0 at pci0 dev 29 function 0: Intel 82801EB/ER USB UHCI Controller (rev.
0x02)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: Intel 82801EB/ER USB UHCI Controller (rev.
0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: Intel 82801EB/ER USB UHCI Controller (rev.
0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: Intel 82801EB/ER USB UHCI Controller (rev.
0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: Intel 82801EB/ER USB EHCI Controller (rev.
0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb1 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xc2)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
fxp0 at pci2 dev 8 function 0: Intel PRO/100 VM Network Controller with
82562ET/EZ PHY, rev 2
fxp0: interrupting at ioapic0 pin 20
fxp0: Ethernet address 00:0d:61:02:cd:17
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: Intel 82801EB LPC Interface Bridge (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2
piixide1: Intel 82801EB Serial ATA Controller (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 18 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus3 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: Intel 82801EB/ER SMBus Controller (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
spdmem0 at iic0 addr 0x50
spdmem0: DDR SDRAM memory, no parity or ECC, 256MB, 400MHz (PC-3200)
spdmem0: 13 rows, 10 cols, 1 ranks, 4 banks/chip, 5.0ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 2-3-3-8
spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x51
spdmem1: DDR SDRAM memory, no parity or ECC, 256MB, 400MHz (PC-3200)
spdmem1: 13 rows, 10 cols, 1 ranks, 4 banks/chip, 5.0ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 2-3-3-8
spdmem1: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
spdmem2 at iic0 addr 0x52
spdmem2: DDR SDRAM memory, no parity or ECC, 256MB, 400MHz (PC-3200)
spdmem2: 13 rows, 10 cols, 1 ranks, 4 banks/chip, 5.0ns cycle time
spdmem2: tAA-tRCD-tRP-tRAS: 2-3-3-8
spdmem2: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
spdmem3 at iic0 addr 0x53
spdmem3: DDR SDRAM memory, no parity or ECC, 256MB, 400MHz (PC-3200)
spdmem3: 13 rows, 10 cols, 1 ranks, 4 banks/chip, 5.0ns cycle time
spdmem3: tAA-tRCD-tRP-tRAS: 2-3-3-8
spdmem3: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
auich0 at pci0 dev 31 function 5: i82801EB (ICH5) AC-97 Audio
auich0: interrupting at ioapic0 pin 17
auich0: ac97: Avance Logic ALC655 codec; no 3D stereo
auich0: ac97: ext id 0x9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
isa0 at ichlpcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
audio0 at auich0: full duplex, independent
uhub0 at usb2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
uhub2 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
wd0 at atabus0 drive 0: <IC35L060AVV207-0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 58643 MB, 119147 cyl, 16 head, 63 sec, 512 bytes/sect x 120101087 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <DVD1648/BKH, , VER A00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd1 at atabus3 drive 0: <Hitachi HDP725025GLA380>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
uhidev1 at uhub0 port 2 configuration 1 interface 0
uhidev1: Holtek Semiconductor USB Keyboard, rev 1.10/3.10, addr 3, iclass 3/1
ukbd0 at uhidev1
root file system type: ffs
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub0 port 2 configuration 1 interface 1
uhidev2: Holtek Semiconductor USB Keyboard, rev 1.10/3.10, addr 3, iclass 3/0
uhidev2: 2 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
========================= CONFIG =============================
include "arch/i386/conf/std.i386"
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
maxusers 64 # estimated number of users
makeoptions CPUFLAGS="-march=pentium4 -mtune=pentium4" # Assume at least
486,
# tune for more modern
options I386_CPU
options I486_CPU
options I586_CPU
options I686_CPU
# CPU-related options.
options VM86 # virtual 8086 emulation
options USER_LDT # user-settable LDT; used by WINE
options MTRR # memory-type range register syscall support
# doesn't work with MP just yet..
#options PERFCTRS # performance-monitoring counters support
options MULTIBOOT # Multiboot support (see multiboot(8))
# delay between "rebooting ..." message and hardware reset, in milliseconds
options CPURESET_DELAY=1000
# This option allows you to force a serial console at the specified
# I/O address. see console(4) for details.
#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
# you don't want the option below ON iff you are using the
# serial console option of the new boot strap code.
#options CONS_OVERRIDE # Always use above! independent of boot info
# Standard system options
options INSECURE # disable kernel security levels - X needs this
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
options NTP # NTP phase/frequency locked loop
options KTRACE # system call tracing via ktrace(1)
# Note: SysV IPC parameters could be changed dynamically, see sysctl(8).
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
options SYSVSHM # System V-like memory sharing
options P1003_1B_SEMAPHORE # p1003.1b semaphore support
options MODULAR # new style module framework
options USERCONF # userconf(4) support
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
# Beep when it is safe to power down the system (requires sysbeep)
options BEEP_ONHALT
# Some tunable details of the above feature (default values used below)
#options BEEP_ONHALT_COUNT=3 # Times to beep
#options BEEP_ONHALT_PITCH=1500 # Default frequency (in Hz)
#options BEEP_ONHALT_PERIOD=250 # Default duration (in msecs)
# Alternate buffer queue strategies for better responsiveness under high
# disk I/O load.
#options BUFQ_READPRIO
options BUFQ_PRIOCSCAN
# Diagnostic/debugging support options
#options DIAGNOSTIC # expensive kernel consistency checks
#options DEBUG # expensive debugging checks/support
#options KMEMSTATS # kernel memory statistics (vmstat -m)
options DDB # in-kernel debugger
options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
#options DDB_VERBOSE_HELP
#options KGDB # remote debugger
#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
#makeoptions DEBUG="-g" # compile full symbol table
#options SYSCALL_STATS # per syscall counts
#options SYSCALL_TIMES # per syscall times
#options SYSCALL_TIMES_HASCOUNTER # use 'broken' rdtsc (soekris)
# Compatibility options, built as modules by default
options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI
options COMPAT_09 # NetBSD 0.9
options COMPAT_10 # NetBSD 1.0
options COMPAT_11 # NetBSD 1.1
options COMPAT_12 # NetBSD 1.2, 386BSD, and BSDI
options COMPAT_13 # NetBSD 1.3, 386BSD, and BSDI
options COMPAT_14 # NetBSD 1.4
options COMPAT_15 # NetBSD 1.5
options COMPAT_16 # NetBSD 1.6
options COMPAT_20 # NetBSD 2.0
options COMPAT_30 # NetBSD 3.0
options COMPAT_40 # NetBSD 4.0
options COMPAT_50 # NetBSD 5.0
options COMPAT_43 # 4.3BSD, 386BSD, and BSDI
options COMPAT_386BSD_MBRPART # recognize old partition ID
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
options COMPAT_OSSAUDIO # OSS (Voxware) audio driver compatibility
#options COMPAT_SVR4 # binary compatibility with SVR4
#options COMPAT_IBCS2 # binary compatibility with SCO and ISC
options COMPAT_LINUX # binary compatibility with Linux
options COMPAT_FREEBSD # binary compatibility with FreeBSD
#options COMPAT_MACH # binary compatibility with Mach binaries
#options COMPAT_DARWIN # binary compatibility with Darwin binaries
#options EXEC_MACHO # exec MACH-O binaries
#options COMPAT_NDIS # NDIS network driver
#options COMPAT_PECOFF # kernel support to run Win32 apps
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
# File systems, built as modules by default
file-system FFS # UFS
file-system EXT2FS # second extended file system (linux)
#file-system LFS # log-structured file system
file-system MFS # memory file system
#file-system NFS # Network File System client
#file-system NTFS # Windows/NT file system (experimental)
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
file-system FDESC # /dev/fd
file-system KERNFS # /kern
file-system NULLFS # loopback file system
file-system OVERLAY # overlay file system
file-system PORTAL # portal filesystem (still experimental)
file-system PROCFS # /proc
file-system UMAPFS # NULLFS + uid and gid remapping
file-system UNION # union file system
#file-system CODA # Coda File System; also needs vcoda (below)
#file-system SMBFS # experimental - CIFS; also needs nsmb (below)
file-system PTYFS # /dev/ptm support
file-system TMPFS # Efficient memory file-system
file-system UDF # experimental - OSTA UDF CD/DVD file-system
#file-system HFS # experimental - Apple HFS+ (read-only)
# File system options
#options QUOTA # UFS quotas
#options FFS_EI # FFS Endian Independent support
#options WAPBL # File system journaling support - Experimental
options SOFTDEP
#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
#options NFSSERVER # Network File System server
#options FFS_NO_SNAPSHOT # No FFS snapshot support
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
# Networking options
#options GATEWAY # packet forwarding
options INET # IP + ICMP + TCP + UDP
#options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
#options IPSEC_DEBUG # debug for IP security
options MROUTING # IP multicast routing
options PIM # Protocol Independent Multicast
#options ISO,TPIP # OSI
#options EON # OSI tunneling over IP
options NETATALK # AppleTalk networking protocols
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
options IPFILTER_LOOKUP # ippool(8) support
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options ACPIVERBOSE # verbose ACPI device autoconfig messages
#options EISAVERBOSE # verbose EISA device autoconfig messages
options MIIVERBOSE # verbose PHY autoconfig messages
options PCIVERBOSE # verbose PCI device autoconfig messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
#options PCMCIAVERBOSE # verbose PCMCIA configuration messages
options SCSIVERBOSE # human readable SCSI error messages
options USBVERBOSE # verbose USB device autoconfig messages
#options PNPBIOSVERBOSE # verbose PnP BIOS messages
#options PNPBIOSDEBUG # more fulsome PnP BIOS debugging messages
#options MCAVERBOSE # verbose MCA device autoconfig messages
#options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
#
# wscons options
#
# builtin terminal emulations
#options WSEMUL_SUN # sun terminal emulation
options WSEMUL_VT100 # VT100 / VT220 emulation
# customization of console and kernel output - see dev/wscons/wsdisplayvar.h
options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8)
#options WS_DEFAULT_FG=WSCOL_WHITE
#options WS_DEFAULT_BG=WSCOL_BLACK
#options WS_DEFAULT_COLATTR="(0)"
#options WS_DEFAULT_MONOATTR="(0)"
options WS_KERNEL_FG=WSCOL_GREEN
#options WS_KERNEL_BG=WSCOL_BLACK
#options WS_KERNEL_COLATTR=""
#options WS_KERNEL_MONOATTR=""
# customization of console border color
options WSDISPLAY_CUSTOM_BORDER # custom border colors via wsconsctl(8)
#options WSDISPLAY_BORDER_COLOR=WSCOL_BLUE # default color
# compatibility to other console drivers
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
options WSDISPLAY_COMPAT_USL # VT handling
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
#options WSKBD_EVENT_AUTOREPEAT # auto repeat in event mode
#options WSKBD_USONLY # strip off non-US keymaps
# don't attach pckbd as the console if no PS/2 keyboard is found
options PCKBD_CNATTACH_MAY_FAIL
# see dev/pckbport/wskbdmap_mfii.c for implemented layouts
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" # for pckbd driver
#options UKBD_LAYOUT="(KB_DE | KB_NODEAD)" # for ukbd driver
# allocate a number of virtual screens at autoconfiguration time
#options WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options PCDISPLAY_SOFTCURSOR
# modify the screen type of the console; defaults to "80x25"
#options VGA_CONSOLE_SCREENTYPE="\"80x24\""
# work around a hardware bug that loaded fonts don't work; found on ATI cards
#options VGA_CONSOLE_ATI_BROKEN_FONTSEL
# console scrolling support.
options WSDISPLAY_SCROLLSUPPORT
# enable VGA raster mode capable of displaying multilingual text on console
#options VGA_RASTERCONSOLE
# enable splash screen support; requires hw driver support
#options SPLASHSCREEN
#options SPLASHSCREEN_PROGRESS
# Kernel root file system and dump configuration.
config netbsd root on ? type ?
#config netbsd root on sd0a type ffs
#config netbsd root on ? type nfs
#
# Device configuration
#
# Basic Bus Support
#IPMI support
ipmi0 at mainbus?
# Advanced Configuration and Power Interface
# This option can be used to retrieve CPU and APIC information.
# that I/O APICs can be used if ACPI is enabled below.
#options MPBIOS_SCANPCI # find PCI roots using MPBIOS
options ACPI_SCANPCI # find PCI roots using ACPI
acpi0 at mainbus0
options ACPI_ACTIVATE_DEV # If set, activate inactive devices
options PCI_INTR_FIXUP
#options ACPICA_PEDANTIC # force strict conformance to the Spec.
options VGA_POST # in-kernel support for VGA POST
# ACPI devices
apm* at acpi? # ACPI apm emulation
acpiacad* at acpi? # ACPI AC Adapter
acpibat* at acpi? # ACPI Battery
acpibut* at acpi? # ACPI Button
acpidalb* at acpi? # ACPI Direct Application Launch Button
# The ACPI Embedded Controller is generally configured via the special ECDT.
# This is required as parts of the DSDT can reference the EC before the normal
# attach phase.
acpiec* at acpi? # ACPI Embedded Controller (late
binding)
acpiecdt* at acpi? # ACPI Embedded Controller (early
binding)
acpilid* at acpi? # ACPI Lid Switch
acpitz* at acpi? # ACPI Thermal Zone
# Mainboard devices
#aiboost* at acpi? # ASUS AI Booster Hardware Monitor
#asus* at acpi? # ASUS hotkeys
attimer* at acpi? # AT Timer
com* at acpi? # Serial communications interface
fdc* at acpi? # Floppy disk controller
#hpqlb* at acpi? # HP Quick Launch Buttons
hpet* at acpi? # High Precision Event Timer
joy* at acpi? # Joystick/Game port
#lpt* at acpi? # Parallel port
mpu* at acpi? # Roland MPU-401 MIDI UART
npx* at acpi? # Math coprocessor
#pckbc* at acpi? # PC keyboard controller
pcppi* at acpi? # AT-style speaker sound
#thinkpad* at acpi? # IBM/Lenovo Thinkpad hotkeys
#ug* at acpi? # Abit uGuru Hardware monitor
#wss* at acpi? # NeoMagic 256AV in wss mode
#ym* at acpi? # Yamaha OPL3-SA[23] audio
# Sony Vaio jog dial
#spic* at acpi? # Sony Programmable I/O Controller
#wsmouse* at spic?
# Sony LCD brightness etc.
#sony* at acpi? # Sony Miscellaneous Controller
# Toshiba Libretto devices
#vald* at acpi?
# PCI bus support
pci* at mainbus? bus ?
pci* at pchb? bus ?
pci* at ppb? bus ?
ichlpcib* at pci? dev ? function ? # Intel ICH PCI-ISA w/ timecounter,
# watchdog, SpeedStep and HPET
pchb* at pci? dev ? function ? # PCI-Host bridges
pcib* at pci? dev ? function ? # PCI-ISA bridges
ppb* at pci? dev ? function ? # PCI-PCI bridges
agp* at pchb?
options DRM_EXTERNAL
mgadrm* at vga?
options DRM_DEBUG
# ISA bus support
#isa0 at amdpcib?
#isa0 at gcscpcib?
isa0 at ichlpcib?
#isa0 at piixpcib?
#isa0 at gscpcib?
#isa0 at viapcib?
#isa0 at mainbus?
#isa0 at pceb?
isa0 at pcib?
# Console Devices
# wscons
vga* at pci? dev ? function ?
wsdisplay* at vga? console ?
# VESA framebuffer console
options KVM86 # required for vesabios
#vesabios* at vesabiosbus?
#vesafb* at vesabios?
#options VESAFB_WIDTH=640
#options VESAFB_HEIGHT=480
#options VESAFB_DEPTH=8
#options VESAFB_PM # power management support
#wsdisplay* at vesafb? console ?
sysbeep0 at pcppi?
# Serial Devices
# Hardware monitors
# Intel Core's on-die Thermal sensor
options INTEL_CORETEMP
# Intel ICH SMBus controller
ichsmb* at pci? dev ? function ?
iic* at ichsmb?
# Serial Presence Detect capable memory modules
spdmem* at iic? addr 0x50
spdmem* at iic? addr 0x51
spdmem* at iic? addr 0x52
spdmem* at iic? addr 0x53
# SCSI bus support
scsibus* at scsi?
# SCSI devices
sd* at scsibus? target ? lun ? # SCSI disk drives
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
ss* at scsibus? target ? lun ? # SCSI scanners
uk* at scsibus? target ? lun ? # SCSI unknown
# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
ahcisata* at pci? dev ? function ? # AHCI SATA controllers
artsata* at pci? dev ? function ? # Intel i31244 SATA controller
piixide* at pci? dev ? function ? # Intel IDE controllers
pdcide* at pci? dev ? function ? # Promise IDE controllers
# ATA (IDE) bus support
atabus* at ata?
options ATADEBUG
# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd* at atabus? drive ? flags 0x0000
# ATAPI bus support
atapibus* at atapi?
# ATAPI devices
# flags have the same meaning as for IDE drives.
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
# Miscellaneous mass storage devices
# ISA floppy
#fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
#fdc1 at isa? port 0x370 irq ? drq ?
fd* at fdc? drive ? # the drives themselves
# some machines need you to do this instead of fd*
#fd0 at fdc0 drive 0
# Network Interfaces
# PCI network interfaces
fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B
# MII/PHY support
inphy* at mii? phy ? # Intel 82555 PHYs
ukphy* at mii? phy ? # generic unknown PHYs
# USB Controller and Devices
# PCI USB controllers
ehci* at pci? dev ? function ? # Enhanced Host Controller
uhci* at pci? dev ? function ? # Universal Host Controller (Intel)
# USB bus support
usb* at ehci?
usb* at uhci?
# USB Hubs
uhub* at usb?
uhub* at uhub? port ?
# USB HID device
uhidev* at uhub? port ? configuration ? interface ?
# USB Mice
ums* at uhidev? reportid ?
wsmouse* at ums? mux 0
# USB Keyboards
ukbd* at uhidev? reportid ?
wskbd* at ukbd? console ? mux 1
# USB Generic HID devices
uhid* at uhidev? reportid ?
# USB Printer
ulpt* at uhub? port ? configuration ? interface ?
# USB Modem
umodem* at uhub? port ? configuration ?
ucom* at umodem?
# USB Mass Storage
umass* at uhub? port ? configuration ? interface ?
wd* at umass?
# Serial adapters
ubsa* at uhub? port ? # Belkin serial adapter
ucom* at ubsa? portno ?
uchcom* at uhub? port ? # WinChipHead CH341/CH340 serial adapter
ucom* at uchcom? portno ?
uftdi* at uhub? port ? # FTDI FT8U100AX serial adapter
ucom* at uftdi? portno ?
uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
ucom* at uplcom? portno ?
uslsa* at uhub? port ? # Silicon Labs USB-RS232 serial adapter
ucom* at uslsa? portno ?
uvscom* at uhub? port ? # SUNTAC Slipper U VS-10U serial adapter
ucom* at uvscom? portno ?
# USB Generic driver
ugen* at uhub? port ?
# On ugen bulk endpoints, perform read-ahead and write-behind.
options UGEN_BULK_RA_WB
# USB generic serial port (e.g., data over cellular)
ugensa* at uhub? port ?
ucom* at ugensa?
# Audio Devices
# PCI audio devices
auich* at pci? dev ? function ? # Intel ICH integrated AC'97 Audio
# Audio support
audio* at audiobus?
# Video capture devices
uvideo* at uhub? # USB Video Class capture devices
video* at videobus?
# TV cards
# Bluetooth Controller and Device support
# Bluetooth USB Controllers
ubt* at uhub? port ?
# Bluetooth Device Hub
bthub* at bcsp?
bthub* at btuart?
bthub* at ubt?
# Bluetooth HID support
bthidev* at bthub?
# Bluetooth Audio support
btsco* at bthub?
# Mice
# Cryptographic Devices
# Pull in optional local configuration
cinclude "arch/i386/conf/Battleaxe.local"
# Pseudo-Devices
pseudo-device crypto # /dev/crypto device
pseudo-device swcrypto # software crypto implementation
# disk/mass storage pseudo-devices
pseudo-device cgd 4 # cryptographic disk devices
pseudo-device fss 4 # file system snapshot device
pseudo-device md 1 # memory disk device (ramdisk)
options MEMORY_DISK_HOOKS # enable root ramdisk
options MEMORY_DISK_DYNAMIC # loaded via kernel module
pseudo-device vnd # disk-like interface to files
options VND_COMPRESSION # compressed vnd(4)
# network pseudo-devices
pseudo-device bpfilter # Berkeley packet filter
#pseudo-device carp # Common Address Redundancy Protocol
#pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop # network loopback
pseudo-device ppp # Point-to-Point Protocol
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
pseudo-device tap # virtual Ethernet
pseudo-device tun # network tunneling over tty
pseudo-device gre # generic L3 over IP tunnel
#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith # IPv[46] tcp relay translation i/f
#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
pseudo-device vlan # IEEE 802.1q encapsulation
pseudo-device bridge # simple inter-network bridging
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
pseudo-device agr # IEEE 802.3ad link aggregation
#pseudo-device pf # PF packet filter
#pseudo-device pflog # PF log if
# srt is EXPERIMENTAL
#pseudo-device srt # source-address-based routing
# miscellaneous pseudo-devices
pseudo-device pty # pseudo-terminals
pseudo-device sequencer 1 # MIDI sequencer
# rnd works; RND_COM does not on port i386 yet.
pseudo-device rnd # /dev/random and in-kernel generator
#options RND_COM # use "com" randomness as well (BROKEN)
pseudo-device clockctl # user control of clock subsystem
pseudo-device ksyms # /dev/ksyms
pseudo-device lockstat # lock profiling
pseudo-device bcsp # BlueCore Serial Protocol
pseudo-device btuart # Bluetooth HCI UART (H4)
# wscons pseudo-devices
pseudo-device wsmux # mouse & keyboard multiplexor
pseudo-device wsfont
# cmos(4) pseudo-device
pseudo-device cmos
# pseudo audio device driver
pseudo-device pad
# userland interface to drivers, including autoconf and properties retrieval
pseudo-device drvctl
options FILEASSOC # fileassoc(9) - required for Veriexec
options PAX_MPROTECT=0 # PaX mprotect(2) restrictions
options PAX_ASLR=0 # PaX Address Space Layout Randomization
--
Dr.-Ing. Stephan Thesing
Elektrastr. 50
81925 München
GERMANY
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen:
http://www.gmx.net/de/go/multimessenger01
Home |
Main Index |
Thread Index |
Old Index