Re: [gmane.os.netbsd.current] Re: NetBSD on the Lenovo IdeaPad S10 ?

["Joel CARNAT" <joel%carnat.net@localhost>]

Hello,

Find attached the full dmesg with the patch applied (plus a few addings in
pcidevs*).
  bwi0 at pci3 dev 0 function 0
  bwi0: interrupting at ioapic0 pin 18
  bwi_sysctlattach: sysctl_createv failed (rc = 0)
  bwi0: BBP id 0x4312, BBP rev 0x1, BBP pkg 0
  bwi0: MAC rev 15 is not supported
  bwi0: no MAC was found

I don't see bwi0 when issuing "ifconfig".
But I didn't install the firmware files as I don't know where they should
go...

Le Mer 15 octobre 2008 22:49, Taylor R Campbell a écrit :
>    Date: Tue, 14 Oct 2008 13:33:25 +0200 (CEST)
>    From: "Joel CARNAT" <joel%carnat.net@localhost>
>
>    nope, OpenBSD recognised it, but it is not configured:
>    "Broadcom BCM4315" rev 0x01 at pci3 dev 0 function 0 not configured
>
>    I have found the entry in pcidevs but the driver does not seem to be
> here
>    (yet).
>
>    I didn't try any Linux on it.
>
> I ported bwi(4) to NetBSD from OpenBSD and DragonFlyBSD.  It works for
> me on a PowerBook G4 with an AirPort Extreme card, which is a Broadcom
> BCM 4309 card, whose PCI product id is 0x4320.  If you're brave, the
> patch is in <http://people.csail.mit.edu/riastradh/nbsd/>, and it
> applies cleanly to and builds in HEAD and netbsd-4 as of about a month
> ago.  The firmware at <http://leaf.dragonflybsd.org/~sephe/bwi/v3.tbz>
> is necessary for this to operate.  Furthermore, you'll need to modify
> the code in sys/dev/pci/if_bwi_pci.c so that it accepts the BCM 4315
> as well, whose product id I don't actually know -- it's not listed at
> pcidatabase.com --: you'll have to find it by grovelling through the
> PCI tree.  Neither DragonFlyBSD nor OpenBSD, when I checked their
> sources out, knew about the BCM 4315; nor does the Linux bcm43xx
> driver, as far as I know.
>
> Caveat: I really don't know anything about the hardware you have; I am
> only guessing that it might possibly be similar to other BCM 43xx
> devices.  It's up to you whether you want to risk letting the magic
> smoke out of your laptop by trying bwi(4) with your hardware; all I
> know is that bwi(4) works for me on mine.  On the other hand, if you
> are a brave and enterprising soul, I'd like to know whether bwi(4)
> does anything interesting with your hardware -- even if you can't get
> packets through, I'd still like to know if, say, it claims to
> successfully load the firmware, adjust the TX power, &c.
>
> (Please cc me in replies, since I'm not subscribed to the list.)
>

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.73 (TUMFATIG) #2: Thu Oct 16 21:10:34 CEST 2008
        root%pak.tumfatig.net@localhost:/usr/src/sys/arch/i386/compile/TUMFATIG
total memory = 2038 MB
avail memory = 1991 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO                           Lenovo           (Lenovo                  )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1596MHz, id 0x106c2
cpu0: Intel(R) On Demand Clock Modulation (state disabled)
cpu1 at mainbus0 apid 1: Intel 686-class, 1596MHz, id 0x106c2
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <PTLTD ,    XSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
npx1 at acpi0 (MATH, PNP0C04)
npx1: io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TIMR, PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 0
acpiec0 at acpi0 (EC0, PNP0C09-1): ACPI Embedded Controller
acpiec0: io 0x62,0x66
VPC0 (VPC2004) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN1024): aux port
pckbc2: irq 12
acpitz0 at acpi0 (TZ00): critical 95.0C passive 39.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.2
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x27ac (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x27ae (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
i915drm0 at vga1: Intel i945GME (unit 0)
i915drm0: AGP at 0xd0000000 256MB
i915drm0: Initialized i915 1.5.0 20060119
vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at pci0 dev 
2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22
azalia0: host: 0x8086/0x27d8 (rev. 2), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
ppb0: disabling notification events
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci1 dev 0 function 0: Broadcom BCM5906M Fast Ethernet
bge0: interrupting at ioapic0 pin 16
bge0: ASIC unknown BCM5906 (0xc002), Ethernet address 00:1e:68:ad:ee:bd
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5906 10/100baseTX media interface, rev. 0
brgphy0: using BCM5750 DSP patch
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02)
ppb1: disabling notification events
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02)
ppb2: disabling notification events
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
bwi0 at pci3 dev 0 function 0
bwi0: interrupting at ioapic0 pin 18
bwi_sysctlattach: sysctl_createv failed (rc = 0)
bwi0: BBP id 0x4312, BBP rev 0x1, BBP pkg 0
bwi0: MAC rev 15 is not supported
bwi0: no MAC was found
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci4 at ppb3 bus 6
pci4: no spaces enabled!
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x27b9 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
hpet0 at ichlpcib0
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide1 at pci0 dev 31 function 2
piixide1: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus1 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus2 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
attimer1: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: 0x10ec/0x0269 (rev. 0.4), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0 at uhub4 port 2 configuration 1 interface 0
umass0: Prolific Technology Inc. Mass Storage Device, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <IC25N040, ATCS05-0, CS4O> disk fixed
sd0: fabricating a geometry
sd0: 38154 MB, 38154 cyl, 64 head, 32 sec, 512 bytes/sect x 78140160 sectors
sd0: fabricating a geometry
uvideo0 at uhub4 port 3 configuration 1 interface 0: BISON Corporation Lenovo 
EasyCamera, rev 2.00/14.03, addr 3
video0 at uvideo0: BISON Corporation Lenovo EasyCamera, rev 2.00/14.03, addr 3
wd0 at atabus1 drive 0: <WDC WD3200BEVT-75ZCT0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
umass1 at uhub4 port 5 configuration 1 interface 0
umass1: Generic USB2.0-CRW, rev 2.00/58.87, addr 4
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
sd1: drive offline
sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1: unable to open device, error = 19
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)