Current-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

current-i386 not booting (not seeing SATA wd0?)



It didn't save the dmesg from the hang. Probably because I power cycled,
duh. Let me try hitting the reset button next.

In any case, here's the dmesg from when it DOES boot.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.62 (AMTTEST) #154: Thu May  8 17:22:09 PDT 2008
        
htodd%amttest.i8u.org@localhost:/var/obj/sys/arch/i386/compile.i386/AMTTEST
multiboot: Information structure flags: 0x000007e7
multiboot: Boot loader: GNU GRUB 0.97
multiboot: Command line: /onetbsd
multiboot: 572 KB lower memory, 2069008 KB upper memory
multiboot: Symbol table at 0xc0586450, length 277184 bytes
multiboot: String table at 0xc05c9f10, length 277513 bytes
total memory = 2021 MB
avail memory = 1979 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
                                                                  (             
           )
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel Core 2 (Merom) (686-class), 2131.31 MHz, id 0x6f6
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 
e3bd<SSE3,DTES64,MONITOR,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
cpu0: features3 20100000<XD,EM64T>
cpu0: "Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: ITLB 128 4 KB entries 4-way
cpu0: using thermal monitor 1
cpu0: Initial APIC ID 0
cpu0: Cluster/Package ID 0
cpu0: Core ID 0
cpu0: Intel(R) On Demand Clock Modulation (state disabled)
cpu0: calibrating local timer
cpu0: apic clock running at 266 MHz
cpu0: 64 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: Intel Core 2 (Merom) (686-class), 2131.31 MHz, id 0x6f6
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 
e3bd<SSE3,DTES64,MONITOR,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
cpu1: features3 20100000<XD,EM64T>
cpu1: "Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz"
cpu1: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu1: L2 cache 2 MB 64B/line 8-way
cpu1: ITLB 128 4 KB entries 4-way
cpu1: using thermal monitor 1
cpu1: Initial APIC ID 1
cpu1: Cluster/Package ID 0
cpu1: Core ID 1
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20080321
acpi0: X/RSDT: OemId <INTEL ,DQ965GF ,00001772>, AslId <    ,01000013>
mpacpi: could not get bus number, assuming bus 0
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU2 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU3 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
PCI0 (PNP0A03) at acpi0 not configured
IOCM (PNP0C02) at acpi0 not configured
LNKA (PNP0C0F) at acpi0 not configured
LNKB (PNP0C0F) at acpi0 not configured
LNKC (PNP0C0F) at acpi0 not configured
LNKD (PNP0C0F) at acpi0 not configured
LNKE (PNP0C0F) at acpi0 not configured
LNKF (PNP0C0F) at acpi0 not configured
LNKG (PNP0C0F) at acpi0 not configured
LNKH (PNP0C0F) at acpi0 not configured
DMAC (PNP0200) at acpi0 not configured
RTC (PNP0B00) at acpi0 not configured
PIC (PNP0000) at acpi0 not configured
npx0 at acpi0 (FPU, PNP0C04)
npx0: io 0xf0 irq 13
npx0: reported by CPUID; using exception 16
attimer0 at acpi0 (TMR, PNP0100): AT Timer
attimer0: io 0x40-0x43,0x50-0x53 irq 0
pcppi0 at acpi0 (SPKR, PNP0800)
pcppi0: io 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
XTRA (PNP0C02) at acpi0 not configured
TPM (PNP0C31) at acpi0 not configured
FDC0 (PNP0700) at acpi0 not configured
ECP (PNP0401) at acpi0 not configured
pckbc0 at acpi0 (PS2M, PNP0F03): aux port
pckbc0: irq 12
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
UAR1 (PNP0501) at acpi0 not configured
APIC (PNP0003) at acpi0 not configured
IEIT (INT5400) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
attimer0: attached to pcppi0
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2990 (rev. 0x02)
agp0 at pchb0: detected 7676k stolen memory
agp0: aperture at 0x80000000, size 0x20000000
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2992 (rev. 0x02)
vga0: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 0x8086 product 0x2994 (miscellaneous communications, revision 0x02) at 
pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2
pciide0: vendor 0x8086 product 0x2996 (rev. 0x02)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to native-PCI mode
pciide0: using ioapic0 pin 18 (irq 9) for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel wired to native-PCI mode
atabus1 at pciide0 channel 1
vendor 0x8086 product 0x2997 (serial communications, interface 0x02, revision 
0x02) at pci0 dev 3 function 3 not configured
wm0 at pci0 dev 25 function 0: Intel i82801H (AMT) LAN Controller, rev. 2
wm0: interrupting at ioapic0 pin 20 (irq 11)
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:16:76:b4:f3:68
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21 (irq 9)
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x02)
ehci0: interrupting at ioapic0 pin 18 (irq 9)
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22 (irq 10)
azalia0: host: 0x8086/0x284b (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2841 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
pciide1 at pci2 dev 0 function 0
pciide1: vendor 0x11ab product 0x6101 (rev. 0xb1)
pciide1: bus-master DMA support present, but unused (no driver support)
pciide1: primary channel configured to native-PCI mode
pciide1: using ioapic0 pin 17 (irq 10) for native-PCI interrupt
atabus2 at pciide1 channel 0
pciide1: secondary channel configured to native-PCI mode
atabus3 at pciide1 channel 1
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2843 (rev. 0x02)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x2845 (rev. 0x02)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 4: vendor 0x8086 product 0x2847 (rev. 0x02)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 23 (irq 11)
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19 (irq 11)
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2832 (rev. 0x02)
uhci4: interrupting at ioapic0 pin 18 (irq 9)
usb5 at uhci4: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x02)
ehci1: interrupting at ioapic0 pin 23 (irq 11)
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xf2)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled
fwohci0 at pci6 dev 3 function 0: vendor 0x104c product 0x8023 (rev. 0x00)
fwohci0: interrupting at ioapic0 pin 19 (irq 11)
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:27:00:01:ab:fb:3c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x2814 (rev. 0x02)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801H Serial ATA Controller (ICH8) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 19 (irq 11) for native-PCI interrupt
atabus4 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus5 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x283e (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 21 (irq 9)
iic0 at ichsmb0: I2C bus
piixide1 at pci0 dev 31 function 5
piixide1: Intel 82801H Serial ATA Controller (ICH8) (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel wired to native-PCI mode
piixide1: using ioapic0 pin 19 (irq 11) for native-PCI interrupt
atabus6 at piixide1 channel 0
piixide1: secondary channel wired to native-PCI mode
atabus7 at piixide1 channel 1
isa0 at pcib0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
atapibus0 at atabus2: 2 targets
azalia0: codec[2]: Sigmatel STAC9227X (rev. 2.1)
azalia0: codec[2]: High Definition Audio rev. 1.0
audio0 at azalia0: full duplex, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
cd0 at atapibus0 drive 0: <LITE-ON DVD SOHD-16P9SV, , F$01> cdrom removable
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
wd0 at atabus4 drive 0: <WDC WD1200JS-00MHB0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus5 drive 0: <WDC WD2500KS-00MJB0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

--
Hisashi T Fujinaka - htodd%twofifty.com@localhost
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte


Home | Main Index | Thread Index | Old Index