nForce 430 no sata disks

["Zafer Aydogan" <zafer%aydogan.de@localhost>]

Hello list,

I'm trying to install NetBSD on a dedicated server in a datacenter
remotely. I've done this successfully a few times with various
datacenters.
But this time, the sata hard disks aren't recognized. It looks like an
Nvidia chipset ( nForce 430 with MCP51).  The network (wm0 / intel
e1000) is working fine.
Any ideas how to get the disks recognized ?
I haven't tried current or stable yet. The install image i'm using is
a rather old current (4.99.18) from April 2007.
As far as I know MCP51 is almost identical to MCP55 which is supported
by NetBSD.

Thanks, Zafer.


Here is the dmesg from my Install image:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.18 (INSTALL) #8: Thu Mar  6 17:02:03 CET 2008
        
zafer%mia.aydogan.net@localhost:/home/zafer/netbsd/usr/objdir/sys/arch/i386/compile/INSTALL
total memory = 2030 MB
avail memory = 1986 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfdd64
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon 64 FX or Athlon 64 X2 (686-class), 2009.23 MHz, id 0x40f33
cpu0: features ffdbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features ffdbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features ffdbfbff<FXSR,SSE,SSE2,B27,HTT,LONG,3DNOW2,3DNOW>
cpu0: features2 2001<SSE3>
cpu0: "Dual-Core AMD Opteron(tm) Processor 1212 HE"
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 1 MB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x02f0 (RAM memory, revision 0xa2) at pci0 dev 0
function 0 not configured
vendor 0x10de product 0x02fa (RAM memory, revision 0xa2) at pci0 dev 0
function 1 not configured
vendor 0x10de product 0x02fe (RAM memory, revision 0xa2) at pci0 dev 0
function 2 not configured
vendor 0x10de product 0x02f8 (RAM memory, revision 0xa2) at pci0 dev 0
function 3 not configured
vendor 0x10de product 0x02f9 (RAM memory, revision 0xa2) at pci0 dev 0
function 4 not configured
vendor 0x10de product 0x02ff (RAM memory, revision 0xa2) at pci0 dev 0
function 5 not configured
vendor 0x10de product 0x027f (RAM memory, revision 0xa2) at pci0 dev 0
function 6 not configured
vendor 0x10de product 0x027e (RAM memory, revision 0xa2) at pci0 dev 0
function 7 not configured
ppb0 at pci0 dev 2 function 0: vendor 0x10de product 0x02fc (rev. 0xa1)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 3 function 0: vendor 0x10de product 0x02fd (rev. 0xa1)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci0 dev 5 function 0: vendor 0x10de product 0x0241 (rev. 0xa2)
vga1: WARNING: ignoring 64-bit BAR @ 0x14
vga1: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
vendor 0x10de product 0x0270 (RAM memory, revision 0xa2) at pci0 dev 9
function 0 not configured
pcib0 at pci0 dev 10 function 0
pcib0: vendor 0x10de product 0x0260 (rev. 0xa3)
vendor 0x10de product 0x0264 (SMBus serial bus, revision 0xa3) at pci0
dev 10 function 1 not configured
ohci0 at pci0 dev 11 function 0: vendor 0x10de product 0x026d (rev. 0xa3)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0 at pci0 dev 11 function 1: vendor 0x10de product 0x026e (rev. 0xa3)
ehci0: interrupting at irq 7
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 8 ports each: ohci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
viaide0 at pci0 dev 13 function 0
viaide0: NVIDIA nForce430 IDE Controller (rev. 0xf1)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel ignored (disabled)
viaide1 at pci0 dev 14 function 0
viaide1: NVIDIA nForce430 Serial ATA Controller (rev. 0xf1)
viaide1: bus-master DMA support present
viaide1: couldn't map sata regs
viaide2 at pci0 dev 15 function 0
viaide2: NVIDIA nForce430 Serial ATA Controller (rev. 0xf1)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
viaide2: using irq 10 for native-PCI interrupt
atabus1 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus2 at viaide2 channel 1
ppb2 at pci0 dev 16 function 0: vendor 0x10de product 0x026f (rev. 0xa2)
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled
wm0 at pci3 dev 7 function 0: Intel i82541PI 1000BASE-T Ethernet, rev. 5
viaide1: bus-master DMA support present
viaide1: couldn't map sata regs
viaide2 at pci0 dev 15 function 0
viaide2: NVIDIA nForce430 Serial ATA Controller (rev. 0xf1)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
viaide2: using irq 10 for native-PCI interrupt
atabus1 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus2 at viaide2 channel 1
ppb2 at pci0 dev 16 function 0: vendor 0x10de product 0x026f (rev. 0xa2)
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled
wm0 at pci3 dev 7 function 0: Intel i82541PI 1000BASE-T Ethernet, rev. 5
wm0: interrupting at irq 10
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:1b:81:82:83:84
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
pchb0 at pci0 dev 24 function 0
pchb0: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: vendor 0x1022 product 0x1102 (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: vendor 0x1022 product 0x1103 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "TSC" frequency 2009278130 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
md0: internal 5000 KB image area
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
warning: no /dev/console