4.99.52 opendisk boot error ?

[Frank Kardel <kardel%kardel.name@localhost>]

Hi,

The kernel I tried from 20080203 behaves strange on boot.
opendisk complains with errno 16 (EBUSY) when attempting
the mount the root fs and asks for the root device.
Things continue normal after entering the correct root device.

This behavior was not present with
4.99.48 20080118. Any clues ?

Frank

opendisk: can't open dev wd0 (16)
opendisk: can't open dev wd3 (16)
opendisk: can't open dev wd4 (16)
opendisk: can't open dev wd0 (16)
opendisk: can't open dev wd3 (16)
opendisk: can't open dev wd4 (16)
opendisk: can't open dev wd0 (16)
opendisk: can't open dev wd3 (16)
opendisk: can't open dev wd4 (16)
boot device: <unknown>
root device: wd0a
dump device (default wd0b):
file system (default generic):
root on wd0a dumps on wd0b


NetBSD 4.99.52 (PIPADJ) #9: Sun Feb  3 16:20:19 MET 2008
        
kardel%pip.kardel.name@localhost:/fs/raid1a/src/NetBSD/tc-merge/src/sys/arch/i386/compile/obj.i386/PIPADJ
total memory = 2047 MB
avail memory = 1998 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: AMD Dual-Core Opteron or Athlon 64 X2 (686-class), 2203.01 MHz, id 0x20f32
cpu0: features f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu0: features2 1<SSE3>
cpu0: "AMD Athlon(tm) 64 X2 Dual Core Processor 4400+"
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 1 MB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: Initial APIC ID 0
cpu0: AMD Power Management features: f<TTP,VID,FID,TS>
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 16 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: AMD Dual-Core Opteron or Athlon 64 X2 (686-class), 2202.98 MHz, id 0x20f32
cpu1: features f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu1: features2 1<SSE3>
cpu1: "AMD Athlon(tm) 64 X2 Dual Core Processor 4400+"
cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu1: L2 cache 1 MB 64B/line 16-way
cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: Initial APIC ID 1
cpu1: AMD Power Management features: f<TTP,VID,FID,TS>
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 3, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20070320
acpi0: X/RSDT: OemId <A M I ,OEMXSDT ,05000519>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU2 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
PCI0 (PNP0A03) [PCI/PCI-X Host Bridge] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
DMAD (PNP0200) [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
RTC0 (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
FDC (PNP0700) [PC standard floppy disk controller] at acpi0 not configured
LPTE (PNP0400) [Standard LPT printer port] at acpi0 not configured
SIOR (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
RMSC (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
OMSC (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
UAR2 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
UAR1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
RMEM (PNP0C01) [System Board] at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies K8HTB Host (rev. 0x00)
agp0 at pchb0: 1 Miscellaneous Control unit(s) found.
agp0: aperture at 0xd0000000, size 0x10000000
pchb1 at pci0 dev 0 function 1
pchb1: VIA Technologies product 0x1282 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: VIA Technologies product 0x2282 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: VIA Technologies product 0x3282 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: VIA Technologies product 0x4282 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: VIA Technologies product 0x7282 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: VIA Technologies K8HTB AGP (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Radeon 9600 AP (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
ATI Technologies product 0x4170 (miscellaneous display) at pci1 dev 0 function 
1 not configured
fwohci0 at pci0 dev 7 function 0: VIA Technologies VT6306 IEEE 1394 Host 
Controller (rev. 0x80)
fwohci0: interrupting at ioapic0 pin 16 (irq 5)
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:58:8f:51
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
pdcsata0 at pci0 dev 8 function 0
pdcsata0: Promise PDC20378 SATA150 controller (rev. 0x02)
pdcsata0: interrupting at ioapic0 pin 18 (irq 10)
pdcsata0: bus-master DMA support present
atabus0 at pdcsata0 channel 0
atabus1 at pdcsata0 channel 1
atabus2 at pdcsata0 channel 2
ex0 at pci0 dev 9 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 
0x6c)
ex0: interrupting at ioapic0 pin 16 (irq 5)
ex0: MAC address 00:50:da:ee:ca:2e
bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 4
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex0: WARNING: powerhook_establish is deprecated
skc0 at pci0 dev 10 function 0: ioapic0 pin 17 (irq 11)
skc0: interrupt moderation is 0 us
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0 at skc0 port A: Ethernet address 00:13:d4:9b:67:09
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ahc1 at pci0 dev 11 function 0: Adaptec 2940 Pro Ultra SCSI adapter
ahc1: interrupting at ioapic0 pin 16 (irq 5)
ahc1: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ath0 at pci0 dev 12 function 0
ath0: interrupting at ioapic0 pin 17 (irq 11)
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 
36Mbps 48Mbps 54Mbps
ath0: mac 5.9 phy 4.3 radio 4.6
puc0 at pci0 dev 13 function 0: NetMos NM9845 6 UART (com, com, com, com, com, 
com)
com3 at puc0 port 0: interrupting at ioapic0 pin 18 (irq 10)
com3: ns16550a, working fifo
com4 at puc0 port 1: interrupting at ioapic0 pin 18 (irq 10)
com4: ns16550a, working fifo
com5 at puc0 port 2: interrupting at ioapic0 pin 18 (irq 10)
com5: ns16550a, working fifo
com6 at puc0 port 3: interrupting at ioapic0 pin 18 (irq 10)
com6: ns16550a, working fifo
com7 at puc0 port 4: interrupting at ioapic0 pin 18 (irq 10)
com7: ns16550a, working fifo
com8 at puc0 port 5: interrupting at ioapic0 pin 18 (irq 10)
com8: ns16550a, working fifo
pdcide0 at pci0 dev 14 function 0
pdcide0: Promise Ultra133/ATA Bus Master IDE Accelerator (rev. 0x02)
pdcide0: bus-master DMA support present
pdcide0: primary channel configured to native-PCI mode
pdcide0: using ioapic0 pin 19 (irq 10) for native-PCI interrupt
atabus3 at pdcide0 channel 0
pdcide0: secondary channel configured to native-PCI mode
atabus4 at pdcide0 channel 1
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
viaide0: using ioapic0 pin 20 (irq 11) for native-PCI interrupt
atabus5 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus6 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus7 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus8 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 
0x81)
uhci0: interrupting at ioapic0 pin 21 (irq 5)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 
0x81)
uhci1: interrupting at ioapic0 pin 21 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 
0x81)
uhci2: interrupting at ioapic0 pin 21 (irq 11)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB Controller (rev. 
0x81)
uhci3: interrupting at ioapic0 pin 21 (irq 11)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4: VIA Technologies VT8237 EHCI USB Controller 
(rev. 0x86)
ehci0: interrupting at ioapic0 pin 21 (irq 10)
ehci0: dropped intr workaround enabled
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8237 PCI-ISA Bridge (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC'97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 22 (irq 10)
auvia0: ac97: Avance Logic ALC850 codec; no 3D stereo
auvia0: ac97: ext id 9c6<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA>
audio0 at auvia0: full duplex, independent
pchb6 at pci0 dev 24 function 0
pchb6: Advanced Micro Devices K8 AMD64 HyperTransport configuration (rev. 0x00)
pchb7 at pci0 dev 24 function 1
pchb7: Advanced Micro Devices K8 AMD64 Address Map configuration (rev. 0x00)
pchb8 at pci0 dev 24 function 2
pchb8: Advanced Micro Devices K8 AMD64 DRAM configuration (rev. 0x00)
pchb9 at pci0 dev 24 function 3
pchb9: Advanced Micro Devices K8 AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
scsibus0: waiting 2 seconds for devices to settle...
pdcsata0 port 1: device present, speed: 1.5Gb/s
viaide0 port 0: device present, speed: 1.5Gb/s
viaide0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus1 drive 0fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
cd0 at scsibus0 target 5 lun 0: <YAMAHA, CRW-F1S, 1.0g> cdrom removable
cd0: sync (50.00ns offset 15), 8-bit (20.000MB/s) transfers
st0 at scsibus0 target 8 lun 0: <SEAGATE, DAT    9SP40-000, 911D> tape removable
st0: drive empty
st0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers
ulpt0 at uhub1 port 1 configuration 1 interface 0
ulpt0: Hewlett-Packard DeskJet 1220C, rev 1.00/1.00, addr 2, iclass 7/1
ulpt0: using uni-directional mode
pdcsata0:1:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
: <WDC WD1500ADFD-00NLR1>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 139 GB, 290721 cyl, 16 head, 63 sec, 512 bytes/sect x 293046768 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(pdcsata0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus3 drive 0: <IC35L180AVV207-1>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 172 GB, 359010 cyl, 16 head, 63 sec, 512 bytes/sect x 361882080 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd2 at atabus3 drive 1: <IC35L180AVV207-1>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 172 GB, 359010 cyl, 16 head, 63 sec, 512 bytes/sect x 361882080 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1(pdcide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd2(pdcide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd3 at atabus5 drive 0: <WDC WD1500ADFD-00NLR1>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 139 GB, 290721 cyl, 16 head, 63 sec, 512 bytes/sect x 293046768 sectors
wd3: 32-bit data port
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd3(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd4 at atabus6 drive 0: <WDC WD1500ADFD-00NLR1>
wd4: drive supports 16-sector PIO transfers, LBA48 addressing
wd4: 139 GB, 290721 cyl, 16 head, 63 sec, 512 bytes/sect x 293046768 sectors
wd4: 32-bit data port
wd4: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd4(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
IPsec: Initialized Security Association Processing.
wd5 at atabus7 drive 0: <IBM-DTLA-305040>
wd5: drive supports 16-sector PIO transfers, LBA addressing
wd5: 39266 MB, 79780 cyl, 16 head, 63 sec, 512 bytes/sect x 80418240 sectors
wd5: 32-bit data port
wd5: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd5(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus8: 2 targets
cd1 at atapibus0 drive 0: <HL-DT-STDVD-RAM GSA-H55L, , 1.02> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd1(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
ubt0 at uhub1 port 2
ubt0: Broadcom Corp BT EDR Dongle, rev 2.00/0.00, addr 3
opendisk: can't open dev wd0 (16)
opendisk: can't open dev wd3 (16)
opendisk: can't open dev wd4 (16)
umodem0 at uhub0 port 1 configuration 2 interface 0opendisk: can't open dev wd0 
(16)
opendisk: can't open dev wd3 (16)
opendisk: can't open dev wd4 (16)
opendisk: can't open dev wd0 (16)
opendisk: can't open dev wd3 (16)
opendisk: can't open dev wd4 (16)
boot device: <unknown>
root device: wd0a
dump device (default wd0b): 
file system (default generic): 
root on wd0a dumps on wd0b

umodem0: Lucent Technologies, Inc. ELSA Modem Board, rev 1.00/1.00, addr 2, 
iclass 2/2
umodem0: data interface 1, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
root file system type: ffs
init path (default /sbin/init): 
init: trying /sbin/init