Current-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Netbsd 4 and raid controller driver



Hello,

i'm trying to install netbsd 4 on an IBM server and according to dmesg
there is no raid controller driver .

Apparently Openbsd has a driver called ips(4) for that card.

below my dmesg:

Thx Christophe

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
   2006, 2007
   The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
   The Regents of the University of California.  All rights reserved.

NetBSD 4.0 (INSTALL_LARGE) #0: Sun Dec 16 01:44:06 PST 2007
    
builds@wb34:/home/builds/ab/netbsd-4-0-RELEASE/i386/200712160005Z-obj/home/builds/ab/netbsd-4-0-RELEASE/src/sys/arch/i386/compile/INSTALL_LARGE
total memory = 3839 MB
rbus: rbus_min_start set to 0xc0000000
avail memory = 3762 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd7a1
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Xeon (686-class), 3060.16 MHz, id 0xf29
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 4400<CID,xTPR>
cpu0: "Intel(R) Xeon(TM) CPU 3.06GHz"
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: calibrating local timer
cpu0: apic clock running at 133 MHz
cpu0: 16 page colors
cpu1 at mainbus0: apid 6 (application processor)
cpu1: not started
cpu2 at mainbus0: apid 1 (application processor)
cpu2: not started
cpu3 at mainbus0: apid 7 (application processor)
cpu3: not started
ioapic0 at mainbus0 apid 14 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0 apid 13 (I/O APIC)
ioapic1: pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0 apid 12 (I/O APIC)
ioapic2: pa 0xfec02000, version 11, 16 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <IBM   ,SERONYXP,00001000>, AslId <IBM ,45444f43>
acpi0: SCI interrupting at int 7
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 32-bit timer
LPUS: ACPI: Found matching pin for 0.15.INTA at func 2: 11
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0303 [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not configured
PNP0F13 [PS/2 Port for PS/2-style Mice] at acpi0 not configured
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0003 [APIC] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0C04 [Math Coprocessor] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1166 product 0x0014 (rev. 0x33)
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1166 product 0x0014 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1166 product 0x0014 (rev. 0x00)
vga1 at pci0 dev 6 function 0: vendor 0x1002 product 0x4752 (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pchb3 at pci0 dev 15 function 0
pchb3: vendor 0x1166 product 0x0201 (rev. 0x93)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks CSB5 IDE Controller (rev. 0x93)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
rccide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at rccide0 channel 0
rccide0: secondary channel wired to compatibility mode
rccide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at rccide0 channel 1
ohci0 at pci0 dev 15 function 2: vendor 0x1166 product 0x0220 (rev. 0x05)
ohci0: interrupting at ioapic0 pin 11 (irq 11)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1166 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib0 at pci0 dev 15 function 3
pcib0: vendor 0x1166 product 0x0225 (rev. 0x00)
pchb4 at pci0 dev 16 function 0
pchb4: vendor 0x1166 product 0x0101 (rev. 0x05)
pci1 at pchb4 bus 2
pci1: i/o space, memory space enabled
pchb5 at pci0 dev 16 function 2
pchb5: vendor 0x1166 product 0x0101 (rev. 0x05)
pci2 at pchb5 bus 4
pci2: i/o space, memory space enabled
pchb6 at pci0 dev 17 function 0
pchb6: vendor 0x1166 product 0x0101 (rev. 0x05)
pci3 at pchb6 bus 6
pci3: i/o space, memory space enabled
wm0 at pci3 dev 8 function 0: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm0: interrupting at ioapic1 pin 13 (irq 3)
wm0: 64-bit 100MHz PCIX bus
wm0: 256 word (8 address bits) MicroWire EEPROM
wm0: Ethernet address 00:0d:60:1a:e1:44
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
wm1 at pci3 dev 8 function 1: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm1: interrupting at ioapic1 pin 14 (irq 5)
wm1: 64-bit 100MHz PCIX bus
wm1: 256 word (8 address bits) MicroWire EEPROM
wm1: Ethernet address 00:0d:60:1a:e1:45
makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
pchb7 at pci0 dev 17 function 2
pchb7: vendor 0x1166 product 0x0101 (rev. 0x05)
pci4 at pchb7 bus 8
pci4: i/o space, memory space enabled
vendor 0x9005 product 0x0250 (RAID mass storage, revision 0x02) at
pci4 dev 2 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
ioapic1: enabling
ioapic2: enabling
timecounter: Timecounter "TSC" frequency 3060133840 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
md0: internal 5000 KB image area
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVD-ROM GDR8082N, , 0L02> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(rccide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
(Ultra/33) (using DMA)
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 25 days
WARNING: CHECK AND RESET THE DATE!
warning: no /dev/console



Home | Main Index | Thread Index | Old Index