Subject: Re: ACPI S3 status report on pm branch
To: Jared D. McNeill <jmcneill@invisible.ca>
From: Brian de Alwis <bsd@cs.ubc.ca>
List: current-users
Date: 08/18/2007 19:48:36
--IS0zKkzwUGydFO0o
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Hi Jared. Thanks for your work on this.
On 2007.08.04 19:49:41 -0400, Jared D. McNeill wrote:
> The great news is that I have yet to receive a "completely hosed" report
> yet :-)
>
> More test reports are welcome!
I have a Lenovo ThinkPad T60 (model 2007-62U; an Intel Core Duo).
I've tried a GENERIC and GENERIC.MP from the jmcneill-pm branch,
and variants with PCI_ADDR_FIXUP and PCI_BUS_FIXUP.
For GENERIC:
* 'apm -d -z' from freshly-booted single-user works!
* it wedges if ath0 has an IP address and is up. It's fine if
ath0 is up but no IP address. ath0 is reported as:
ath0: WARNING: power management not supported
so maybe that's not surprising. An 'ifconfig ath0 down' does
the trick.
* the dmesg has a lot of text about ACPI parsing errors;
this is why I use PCI_{ADDR,BUS}_FIXUP
For GENERIC.MP: I wasn't sure if multiprocessors were supported
yet, but thought heck, why not try?
* 'apm -d -z' sends the laptop to sleep correctly.
* the machine doesn't wake up: the fan starts up, and it sounds
like something is happening with the hard drive, but there are
no beeps, nothing appears on-screen, and the machine is locked
solid. The little moon light, indicating that the machine is
suspended, remains on.
* as with GENERIC, the dmesg has a lot of text about ACPI parsing
errors; this is why I use PCI_{ADDR,BUS}_FIXUP
For GENERIC or GENERIC.MP + PCI_{ADDR,BUS}_FIXUP (called LAPTOP
and LAPTOP.MP):
* for both, 'apm -d -z' causes a panic. Some of the panic scrolled
off screen, but the important bits are:
suspend panic in ken_cpu.c, line 216
cpu_setonline(...)
cpu_power(...)
pnp_set_state(...)
pnp_global_transition(...)
acpi_enter_sleep_state(...)
acpiapm_set_powstate(...)
apm_suspend(...)
Although it goes to DDB, the machine is totally locked solid.
I've attached dmesgs for each of the configurations, and the
dmidecode data.
Brian.
--
Brian de Alwis | Software Practices Lab | UBC | http://www.cs.ubc.ca/~bsd/
"Amusement to an observing mind is study." - Benjamin Disraeli
--IS0zKkzwUGydFO0o
Content-Type: text/plain; charset=us-ascii
Content-Description: dmesg-GENERIC
Content-Disposition: attachment; filename=dmesg-generic
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.29 (GENERIC) #2: Sat Aug 18 15:01:20 CST 2007
bsd@monolith:/home/scratch/tmp/netbsd-jmcneill-pm/sys/arch/i386/compile/GENERIC
total memory = 1022 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 994 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd6b0
SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
LENOVO 200762U (ThinkPad T60)
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel Pentium M (Yonah) (686-class), 1995.11 MHz, id 0x6e8
cpu0: features bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 c1a9<SSE3,MONITOR,VMX,EST,TM2,xTPR,PDCM>
cpu0: "Genuine Intel(R) CPU T2500 @ 2.00GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: ITLB 128 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 128 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1404 mV) 2000 MHz
cpu0: unknown Enhanced SpeedStep CPU.
est_init_main: bus_clock = 16667
est_init_main: idlo = 0x613
est_init_main: lo 1004 mV, 1000 MHz
est_init_main: raw 19 , 6
est_init_main: idhi = 0xc2c
est_init_main: hi 1404 mV, 2000 MHz
est_init_main: raw 44 , 12
est_init_main: cur = 0xc2c
est_init_main: fake entry 0: 1404 mV, 2000 MHz MSR*100 mV = 1200 freq = 4400
est_init_main: fake entry 1: 1340 mV, 1833 MHz MSR*100 mV = 1100 freq = 3985
est_init_main: fake entry 2: 1276 mV, 1667 MHz MSR*100 mV = 1000 freq = 3570
est_init_main: fake entry 3: 1212 mV, 1500 MHz MSR*100 mV = 900 freq = 3155
est_init_main: fake entry 4: 1148 mV, 1333 MHz MSR*100 mV = 800 freq = 2740
est_init_main: fake entry 5: 1084 mV, 1167 MHz MSR*100 mV = 700 freq = 2325
est_init_main: fake entry 6: 1020 mV, 1000 MHz MSR*100 mV = 600 freq = 1910
cpu0: Enhanced SpeedStep frequencies available (MHz): 2000 1833 1667 1500 1333 1167 1000
cpu0: calibrating local timer
cpu0: apic clock running at 166 MHz
cpu0: 64 page colors
cpu0: generic device class power management enabled
cpu0: supported states: D0 D3
cpu1 at mainbus0 apid 1: (application processor)
cpu1: not started
cpu1: generic device class power management enabled
cpu1: supported states: D0 D3
ioapic0 at mainbus0 apid 1
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2
ioapic0: remapped to apic 1
ioapic0: generic device class power management enabled
ioapic0: supported states: D0 D3
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <LENOVO,TP-79 ,00002030>, AslId < LTP,00000000>
acpi0: generic device class power management enabled
acpi0: supported states: D0 D3
acpi0: SCI interrupting at int 9
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b77980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKA._STA] (Node 0xc1e77be0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKA._STA] (Node 0xc1e77be0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b77980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKB._STA] (Node 0xc1e77ac0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKB._STA] (Node 0xc1e77ac0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b77980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKC._STA] (Node 0xc1e779a0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKC._STA] (Node 0xc1e779a0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b77980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKD._STA] (Node 0xc1e77880), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKD._STA] (Node 0xc1e77880), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b77980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKE._STA] (Node 0xc1e77760), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKE._STA] (Node 0xc1e77760), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b77980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKF._STA] (Node 0xc1e77640), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKF._STA] (Node 0xc1e77640), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b77980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKG._STA] (Node 0xc1e77520), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKG._STA] (Node 0xc1e77520), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b77980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKH._STA] (Node 0xc1e77400), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKH._STA] (Node 0xc1e77400), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1e83140) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.FDC_._STA] (Node 0xc1e7a440), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.FDC_._STA] (Node 0xc1e7a440), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1e784c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1e867c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1e88a20), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.LURT._STA] (Node 0xc1e7a280), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.LURT._STA] (Node 0xc1e7a280), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSDL] (0xc1e782c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.DURT._STA] (Node 0xc1e7a0c0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.DURT._STA] (Node 0xc1e7a0c0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1e784c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1e867c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1e88a20), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.LLPT._STA] (Node 0xc1e7cf00), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.LLPT._STA] (Node 0xc1e7cf00), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSDL] (0xc1e782c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.DLPT._STA] (Node 0xc1e7cd40), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.DLPT._STA] (Node 0xc1e7cd40), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1e784c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1e867c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1e88a20), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.LECP._STA] (Node 0xc1e7cb80), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.LECP._STA] (Node 0xc1e7cb80), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSDL] (0xc1e782c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.DECP._STA] (Node 0xc1e7ca00), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.DECP._STA] (Node 0xc1e7ca00), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1e83140) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.FIR_._STA] (Node 0xc1e7c7a0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.FIR_._STA] (Node 0xc1e7c7a0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1e83140) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.TPM_._STA] (Node 0xc1e7c600), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.TPM_._STA] (Node 0xc1e7c600), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1e83140) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\SMI_] (Node 0xc1e8b3a0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\RBEC] (Node 0xc1e8b320), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc1e80520), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc1e80520), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1e83140) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\SMI_] (Node 0xc1e8b3a0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\RBEC] (Node 0xc1e8b320), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc1e803a0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc1e803a0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1e784c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1e867c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.IDE0.PRIM.MSTR._STA] (Node 0xc1e85aa0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.IDE0.PRIM.MSTR._STA] (Node 0xc1e85aa0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSIO] (0xc1e78240) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK.GGID] (Node 0xc1e88ea0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK._UID] (Node 0xc1e88f40), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.GDCK._UID] (Node 0xc1e88f40), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSIO] (0xc1e78240) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK.GGID] (Node 0xc1e88ea0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK._STA] (Node 0xc1e86060), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.GDCK._STA] (Node 0xc1e86060), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1e784c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1e867c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1e88a20), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LCIO._STA] (Node 0xc1e88a20), AE_NOT_EXIST
acpi0: found ECDT, GPE 28
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKE (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKF (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKG (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKH (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
MEM (PNP0C01) [System Board] at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpilid0: generic device class power management enabled
acpilid0: supported states: D0 D3
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut0: generic device class power management enabled
acpibut0: supported states: D0 D3
PCI0 (PNP0A08) [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
SIO (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
attimer1: generic device class power management enabled
attimer1: supported states: D0 D3
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff
hpet0: Found 64-bits HPET, will only use lowest 32-bits
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
hpet0: generic device class power management enabled
hpet0: supported states: D0 D3
DMAC (PNP0200) [AT DMA Controller] at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
midi0: WARNING: power management not supported
sysbeep0 at pcppi1
sysbeep0: WARNING: power management not supported
pcppi1: WARNING: power management not supported
npx1 at acpi0 (FPU, PNP0C04)
npx1: io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
npx1: generic device class power management enabled
npx1: supported states: D0 D3
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
pckbc1 at acpi0 (KBD, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc1: generic device class power management enabled
pckbc1: supported states: D0 D3
pckbc2 at acpi0 (MOU, IBM0057): aux port
pckbc2: irq 12
pckbc2: generic device class power management enabled
pckbc2: supported states: D0 D3
TPM (ATM1200) at acpi0 not configured
acpiec0 at acpi0 (EC, PNP0C09-0): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpiec0: generic device class power management enabled
acpiec0: supported states: D0 D3
PUBS (ACPI Object Type 'Power' [0x0b]) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: generic device class power management enabled
acpibat0: supported states: D0 D3
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
acpiacad0: generic device class power management enabled
acpiacad0: supported states: D0 D3
HKEY (IBM0068) at acpi0 not configured
acpitz0 at acpi0 (THM0): ACPI Thermal Zone
acpitz0: passive cooling mode only
acpitz0: critical 127.0C
acpitz0: generic device class power management enabled
acpitz0: supported states: D0 D3
acpitz1 at acpi0 (THM1): ACPI Thermal Zone
acpitz1: critical 99.0C passive 94.5C
acpitz1: generic device class power management enabled
acpitz1: supported states: D0 D3
apm0 at acpi0: Power Management spec V1.2
acpibat0: battery info: SANYO, LION, 92P1137 768
acpiacad0: AC adapter online.
apm0: generic device class power management enabled
apm0: supported states: D0 D3
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
pckbd0: generic device class power management enabled
pckbd0: supported states: D0 D1 D3
wskbd0 at pckbd0: console keyboard
wskbd0: generic device class power management enabled
wskbd0: supported states: D0 D3
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse0: generic device class power management enabled
wsmouse0: supported states: D0 D3
pms0: generic device class power management enabled
pms0: supported states: D0 D3
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pci0: generic device class power management enabled
pci0: supported states: D0 D3
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03)
pchb0: generic device class power management enabled
pchb0: supported states: D0 D3
agp0 at pchb0: can't find internal VGA device config space
agp0: generic device class power management enabled
agp0: supported states: D0 D3
ppb0 at pci0 dev 1 function 0: Intel product 0x27a1 (rev. 0x03)
ppb0: generic device class power management enabled
ppb0: supported states: D0 D3
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
pci1: generic device class power management enabled
pci1: supported states: D0 D3
vga1 at pci1 dev 0 function 0: ATI Technologies product 0x7145 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: generic device class power management enabled
wsdisplay0: supported states: D0 D3
vga1: display device class power management enabled
vga1: supported states: D0 D3
direct rendering for vga1 unsupported
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 17 (irq 11)
azalia0: generic device class power management enabled
azalia0: supported states: D0 D3
azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
ppb1 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x02)
ppb1: generic device class power management enabled
ppb1: supported states: D0 D3
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
pci2: generic device class power management enabled
pci2: supported states: D0 D3
wm0 at pci2 dev 0 function 0: Intel i82573L Gigabit Ethernet, rev. 0
wm0: interrupting at ioapic0 pin 16 (irq 11)
wm0: PCI-Express bus
wm0: 256 word (8 address bits) SPI EEPROM
wm0: Ethernet address 00:16:41:53:a7:2f
makphy0 at wm0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
makphy0: WARNING: power management not supported
wm0: network device class power management enabled
wm0: supported states: D0 D3
ppb2 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x02)
ppb2: generic device class power management enabled
ppb2: supported states: D0 D3
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
pci3: generic device class power management enabled
pci3: supported states: D0 D3
ath0 at pci3 dev 0 function 0
ath0: interrupting at ioapic0 pin 17 (irq 11)
ath0: WARNING: powerhook_establish is deprecated
ath0: WARNING: powerhook_establish is deprecated
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 10.3 phy 6.1 radio 10.2
ath0: WARNING: power management not supported
ppb3 at pci0 dev 28 function 2: Intel 82801GB/GR PCI Express Port #3 (rev. 0x02)
ppb3: generic device class power management enabled
ppb3: supported states: D0 D3
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
pci4: generic device class power management enabled
pci4: supported states: D0 D3
ppb4 at pci0 dev 28 function 3: Intel 82801GB/GR PCI Express Port #4 (rev. 0x02)
ppb4: generic device class power management enabled
ppb4: supported states: D0 D3
pci5 at ppb4 bus 12
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
pci5: generic device class power management enabled
pci5: supported states: D0 D3
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
uhci0: generic device class power management enabled
uhci0: supported states: D0 D3
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: generic device class power management enabled
uhub0: supported states: D0 D3
usb0: WARNING: power management not supported
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 17 (irq 11)
uhci1: generic device class power management enabled
uhci1: supported states: D0 D3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: generic device class power management enabled
uhub1: supported states: D0 D3
usb1: WARNING: power management not supported
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18 (irq 11)
uhci2: generic device class power management enabled
uhci2: supported states: D0 D3
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub2: generic device class power management enabled
uhub2: supported states: D0 D3
usb2: WARNING: power management not supported
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19 (irq 11)
uhci3: generic device class power management enabled
uhci3: supported states: D0 D3
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub3: generic device class power management enabled
uhub3: supported states: D0 D3
usb3: WARNING: power management not supported
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 19 (irq 11)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
ehci0: generic device class power management enabled
ehci0: supported states: D0 D3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub4: generic device class power management enabled
uhub4: supported states: D0 D3
usb4: WARNING: power management not supported
ppb5 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2)
ppb5: generic device class power management enabled
ppb5: supported states: D0 D3
pci6 at ppb5 bus 21
pci6: i/o space enabled
pci6: generic device class power management enabled
pci6: supported states: D0 D3
cbb0 at pci6 dev 0 function 0: Texas Instruments PCI1510 PCI-CardBus Bridge (rev. 0x00)
cbb0: can't map socket base address 0xe4300000
pci_io_find: expected type i/o, found mem
cbb0: can't map socket base address 0x0: io mode
cbb0: WARNING: power management not supported
cbb0: interrupting at ioapic0 pin 16 (irq 11)
cbb0: WARNING: powerhook_establish is deprecated
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22
cardbus0: WARNING: power management not supported
pcmcia0 at cardslot0
pcmcia0: WARNING: power management not supported
cardslot0: WARNING: power management not supported
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801GBM LPC Interface Bridge (rev. 0x02)
pcib0: generic device class power management enabled
pcib0: supported states: D0 D3
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
atabus0: generic device class power management enabled
atabus0: supported states: D0 D1 D3
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide0: generic device class power management enabled
piixide0: supported states: D0 D3
ahcisata0 at pci0 dev 31 function 2: Intel 82801GBM AHCI SATA Controller
ahcisata0: interrupting at ioapic0 pin 16 (irq 11)
ahcisata0: AHCI revision 1.1, 4 ports, 32 command slots, features 0xc710e000
atabus1 at ahcisata0 channel 0
atabus1: generic device class power management enabled
atabus1: supported states: D0 D1 D3
ahcisata0: generic device class power management enabled
ahcisata0: supported states: D0 D3
ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR SMBus Controller (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 23 (irq 11)
iic0 at ichsmb0: I2C bus
iic0: WARNING: power management not supported
ichsmb0: WARNING: power management not supported
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: generic device class power management enabled
isapnp0: supported states: D0 D3
isa0: generic device class power management enabled
isa0: supported states: D0 D3
isapnp0: no ISA Plug 'n Play devices found
mainbus0: generic device class power management enabled
mainbus0: supported states: D0 D3
ioapic0: APICBASE 0xfee00900
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Analog Devices AD1981HD (rev. 2.0)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0)
azalia0: codec[1]: High Definition Audio rev. 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, independent
audio0: audio device class power management enabled
audio0: supported states: D0 D3
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-4083N, 0139599DAE72, 1.08> cdrom removable
cd0: WARNING: power management not supported
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
atapibus0: WARNING: power management not supported
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ahcisata0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus1 drive 0: <FUJITSU MHV2100BH>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568 sectors
wd0: WARNING: power management not supported
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ugen0 at uhub3 port 2
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
ugen0: WARNING: power management not supported
--IS0zKkzwUGydFO0o
Content-Type: text/plain; charset=us-ascii
Content-Description: dmesg-GENERIC.MP
Content-Disposition: attachment; filename="dmesg-generic.mp"
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.29 (GENERIC.MP) #1: Sat Aug 18 10:18:42 CST 2007
bsd@monolith:/home/scratch/tmp/netbsd-jmcneill-pm/sys/arch/i386/compile/GENERIC.MP
total memory = 1022 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 994 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd6b0
SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
LENOVO 200762U (ThinkPad T60)
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel Pentium M (Yonah) (686-class), 1995.11 MHz, id 0x6e8
cpu0: features bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 c1a9<SSE3,MONITOR,VMX,EST,TM2,xTPR,PDCM>
cpu0: "Genuine Intel(R) CPU T2500 @ 2.00GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: ITLB 128 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 128 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1404 mV) 2000 MHz
cpu0: unknown Enhanced SpeedStep CPU.
est_init_main: bus_clock = 16667
est_init_main: idlo = 0x613
est_init_main: lo 1004 mV, 1000 MHz
est_init_main: raw 19 , 6
est_init_main: idhi = 0xc2c
est_init_main: hi 1404 mV, 2000 MHz
est_init_main: raw 44 , 12
est_init_main: cur = 0xc2c
est_init_main: fake entry 0: 1404 mV, 2000 MHz MSR*100 mV = 1200 freq = 4400
est_init_main: fake entry 1: 1340 mV, 1833 MHz MSR*100 mV = 1100 freq = 3985
est_init_main: fake entry 2: 1276 mV, 1667 MHz MSR*100 mV = 1000 freq = 3570
est_init_main: fake entry 3: 1212 mV, 1500 MHz MSR*100 mV = 900 freq = 3155
est_init_main: fake entry 4: 1148 mV, 1333 MHz MSR*100 mV = 800 freq = 2740
est_init_main: fake entry 5: 1084 mV, 1167 MHz MSR*100 mV = 700 freq = 2325
est_init_main: fake entry 6: 1020 mV, 1000 MHz MSR*100 mV = 600 freq = 1910
cpu0: Enhanced SpeedStep frequencies available (MHz): 2000 1833 1667 1500 1333 1167 1000
cpu0: calibrating local timer
cpu0: apic clock running at 166 MHz
cpu0: 64 page colors
cpu0: generic device class power management enabled
cpu0: supported states: D0 D3
cpu1 at mainbus0 apid 1: (application processor)
cpu1: Intel Pentium M (Yonah) (686-class), 1995.00 MHz, id 0x6e8
cpu1: features bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu1: features bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 c1a9<SSE3,MONITOR,VMX,EST,TM2,xTPR,PDCM>
cpu1: "Genuine Intel(R) CPU T2500 @ 2.00GHz"
cpu1: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu1: L2 cache 2 MB 64B/line 8-way
cpu1: ITLB 128 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 128 4 KB entries 4-way, 8 4 MB entries 4-way
cpu1: using thermal monitor 1
cpu1: generic device class power management enabled
cpu1: supported states: D0 D3
ioapic0 at mainbus0 apid 1
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2
ioapic0: remapped to apic 1
ioapic0: generic device class power management enabled
ioapic0: supported states: D0 D3
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <LENOVO,TP-79 ,00002030>, AslId < LTP,00000000>
acpi0: generic device class power management enabled
acpi0: supported states: D0 D3
acpi0: SCI interrupting at int 9
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c91980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKA._STA] (Node 0xc1f91be0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKA._STA] (Node 0xc1f91be0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c91980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKB._STA] (Node 0xc1f91ac0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKB._STA] (Node 0xc1f91ac0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c91980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKC._STA] (Node 0xc1f919a0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKC._STA] (Node 0xc1f919a0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c91980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKD._STA] (Node 0xc1f91880), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKD._STA] (Node 0xc1f91880), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c91980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKE._STA] (Node 0xc1f91760), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKE._STA] (Node 0xc1f91760), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c91980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKF._STA] (Node 0xc1f91640), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKF._STA] (Node 0xc1f91640), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c91980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKG._STA] (Node 0xc1f91520), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKG._STA] (Node 0xc1f91520), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c91980) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKH._STA] (Node 0xc1f91400), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKH._STA] (Node 0xc1f91400), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1f9d140) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.FDC_._STA] (Node 0xc1f94440), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.FDC_._STA] (Node 0xc1f94440), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1f924c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1fa07c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1fa2a20), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.LURT._STA] (Node 0xc1f94280), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.LURT._STA] (Node 0xc1f94280), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSDL] (0xc1f922c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.DURT._STA] (Node 0xc1f940c0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.DURT._STA] (Node 0xc1f940c0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1f924c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1fa07c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1fa2a20), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.LLPT._STA] (Node 0xc1f96f00), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.LLPT._STA] (Node 0xc1f96f00), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSDL] (0xc1f922c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.DLPT._STA] (Node 0xc1f96d40), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.DLPT._STA] (Node 0xc1f96d40), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1f924c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1fa07c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1fa2a20), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.LECP._STA] (Node 0xc1f96b80), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.LECP._STA] (Node 0xc1f96b80), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSDL] (0xc1f922c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.DECP._STA] (Node 0xc1f96a00), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.DECP._STA] (Node 0xc1f96a00), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1f9d140) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.FIR_._STA] (Node 0xc1f967a0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.FIR_._STA] (Node 0xc1f967a0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1f9d140) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.TPM_._STA] (Node 0xc1f96600), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.TPM_._STA] (Node 0xc1f96600), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1f9d140) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\SMI_] (Node 0xc1fa53a0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\RBEC] (Node 0xc1fa5320), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc1f9a520), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc1f9a520), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1f9d140) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\SMI_] (Node 0xc1fa53a0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\RBEC] (Node 0xc1fa5320), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc1f9a3a0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc1f9a3a0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1f924c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1fa07c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.IDE0.PRIM.MSTR._STA] (Node 0xc1f9faa0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.IDE0.PRIM.MSTR._STA] (Node 0xc1f9faa0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSIO] (0xc1f92240) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK.GGID] (Node 0xc1fa2ea0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK._UID] (Node 0xc1fa2f40), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.GDCK._UID] (Node 0xc1fa2f40), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSIO] (0xc1f92240) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK.GGID] (Node 0xc1fa2ea0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK._STA] (Node 0xc1fa0060), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.GDCK._STA] (Node 0xc1fa0060), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1f924c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1fa07c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1fa2a20), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LCIO._STA] (Node 0xc1fa2a20), AE_NOT_EXIST
acpi0: found ECDT, GPE 28
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKE (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKF (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKG (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKH (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
MEM (PNP0C01) [System Board] at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpilid0: generic device class power management enabled
acpilid0: supported states: D0 D3
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut0: generic device class power management enabled
acpibut0: supported states: D0 D3
PCI0 (PNP0A08) [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
SIO (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
attimer1: generic device class power management enabled
attimer1: supported states: D0 D3
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff
hpet0: Found 64-bits HPET, will only use lowest 32-bits
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
hpet0: generic device class power management enabled
hpet0: supported states: D0 D3
DMAC (PNP0200) [AT DMA Controller] at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
midi0: WARNING: power management not supported
sysbeep0 at pcppi1
sysbeep0: WARNING: power management not supported
pcppi1: WARNING: power management not supported
npx1 at acpi0 (FPU, PNP0C04)
npx1: io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
npx1: generic device class power management enabled
npx1: supported states: D0 D3
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
pckbc1 at acpi0 (KBD, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc1: generic device class power management enabled
pckbc1: supported states: D0 D3
pckbc2 at acpi0 (MOU, IBM0057): aux port
pckbc2: irq 12
pckbc2: generic device class power management enabled
pckbc2: supported states: D0 D3
TPM (ATM1200) at acpi0 not configured
acpiec0 at acpi0 (EC, PNP0C09-0): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpiec0: generic device class power management enabled
acpiec0: supported states: D0 D3
PUBS (ACPI Object Type 'Power' [0x0b]) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: generic device class power management enabled
acpibat0: supported states: D0 D3
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
acpiacad0: generic device class power management enabled
acpiacad0: supported states: D0 D3
HKEY (IBM0068) at acpi0 not configured
acpitz0 at acpi0 (THM0): ACPI Thermal Zone
acpitz0: passive cooling mode only
acpitz0: critical 127.0C
acpitz0: generic device class power management enabled
acpitz0: supported states: D0 D3
acpitz1 at acpi0 (THM1): ACPI Thermal Zone
acpitz1: critical 99.0C passive 94.5C
acpitz1: generic device class power management enabled
acpitz1: supported states: D0 D3
apm0 at acpi0: Power Management spec V1.2
acpibat0: battery info: SANYO, LION, 92P1137 768
acpiacad0: AC adapter online.
apm0: generic device class power management enabled
apm0: supported states: D0 D3
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
pckbd0: generic device class power management enabled
pckbd0: supported states: D0 D1 D3
wskbd0 at pckbd0: console keyboard
wskbd0: generic device class power management enabled
wskbd0: supported states: D0 D3
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse0: generic device class power management enabled
wsmouse0: supported states: D0 D3
pms0: generic device class power management enabled
pms0: supported states: D0 D3
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pci0: generic device class power management enabled
pci0: supported states: D0 D3
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03)
pchb0: generic device class power management enabled
pchb0: supported states: D0 D3
agp0 at pchb0: can't find internal VGA device config space
agp0: generic device class power management enabled
agp0: supported states: D0 D3
ppb0 at pci0 dev 1 function 0: Intel product 0x27a1 (rev. 0x03)
ppb0: generic device class power management enabled
ppb0: supported states: D0 D3
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
pci1: generic device class power management enabled
pci1: supported states: D0 D3
vga1 at pci1 dev 0 function 0: ATI Technologies product 0x7145 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: generic device class power management enabled
wsdisplay0: supported states: D0 D3
vga1: display device class power management enabled
vga1: supported states: D0 D3
direct rendering for vga1 unsupported
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 17 (irq 11)
azalia0: generic device class power management enabled
azalia0: supported states: D0 D3
azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
ppb1 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x02)
ppb1: generic device class power management enabled
ppb1: supported states: D0 D3
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
pci2: generic device class power management enabled
pci2: supported states: D0 D3
wm0 at pci2 dev 0 function 0: Intel i82573L Gigabit Ethernet, rev. 0
wm0: interrupting at ioapic0 pin 16 (irq 11)
wm0: PCI-Express bus
wm0: 256 word (8 address bits) SPI EEPROM
wm0: Ethernet address 00:16:41:53:a7:2f
makphy0 at wm0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
makphy0: WARNING: power management not supported
wm0: network device class power management enabled
wm0: supported states: D0 D3
ppb2 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x02)
ppb2: generic device class power management enabled
ppb2: supported states: D0 D3
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
pci3: generic device class power management enabled
pci3: supported states: D0 D3
ath0 at pci3 dev 0 function 0
ath0: interrupting at ioapic0 pin 17 (irq 11)
ath0: WARNING: powerhook_establish is deprecated
ath0: WARNING: powerhook_establish is deprecated
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 10.3 phy 6.1 radio 10.2
ath0: WARNING: power management not supported
ppb3 at pci0 dev 28 function 2: Intel 82801GB/GR PCI Express Port #3 (rev. 0x02)
ppb3: generic device class power management enabled
ppb3: supported states: D0 D3
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
pci4: generic device class power management enabled
pci4: supported states: D0 D3
ppb4 at pci0 dev 28 function 3: Intel 82801GB/GR PCI Express Port #4 (rev. 0x02)
ppb4: generic device class power management enabled
ppb4: supported states: D0 D3
pci5 at ppb4 bus 12
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
pci5: generic device class power management enabled
pci5: supported states: D0 D3
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
uhci0: generic device class power management enabled
uhci0: supported states: D0 D1 D3
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: generic device class power management enabled
uhub0: supported states: D0 D3
usb0: WARNING: power management not supported
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 17 (irq 11)
uhci1: generic device class power management enabled
uhci1: supported states: D0 D1 D3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: generic device class power management enabled
uhub1: supported states: D0 D3
usb1: WARNING: power management not supported
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18 (irq 11)
uhci2: generic device class power management enabled
uhci2: supported states: D0 D1 D3
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub2: generic device class power management enabled
uhub2: supported states: D0 D3
usb2: WARNING: power management not supported
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19 (irq 11)
uhci3: generic device class power management enabled
uhci3: supported states: D0 D1 D3
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub3: generic device class power management enabled
uhub3: supported states: D0 D3
usb3: WARNING: power management not supported
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 19 (irq 11)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
ehci0: generic device class power management enabled
ehci0: supported states: D0 D3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub4: generic device class power management enabled
uhub4: supported states: D0 D3
usb4: WARNING: power management not supported
ppb5 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2)
ppb5: generic device class power management enabled
ppb5: supported states: D0 D3
pci6 at ppb5 bus 21
pci6: i/o space enabled
pci6: generic device class power management enabled
pci6: supported states: D0 D3
cbb0 at pci6 dev 0 function 0: Texas Instruments PCI1510 PCI-CardBus Bridge (rev. 0x00)
cbb0: can't map socket base address 0xe4300000
pci_io_find: expected type i/o, found mem
cbb0: can't map socket base address 0xc0b696b4: io mode
cbb0: WARNING: power management not supported
cbb0: interrupting at ioapic0 pin 16 (irq 11)
cbb0: WARNING: powerhook_establish is deprecated
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22
cardbus0: WARNING: power management not supported
pcmcia0 at cardslot0
pcmcia0: WARNING: power management not supported
cardslot0: WARNING: power management not supported
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801GBM LPC Interface Bridge (rev. 0x02)
pcib0: generic device class power management enabled
pcib0: supported states: D0 D3
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
atabus0: generic device class power management enabled
atabus0: supported states: D0 D1 D3
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide0: generic device class power management enabled
piixide0: supported states: D0 D3
ahcisata0 at pci0 dev 31 function 2: Intel 82801GBM AHCI SATA Controller
ahcisata0: interrupting at ioapic0 pin 16 (irq 11)
ahcisata0: AHCI revision 1.1, 4 ports, 32 command slots, features 0xc710e000
atabus1 at ahcisata0 channel 0
atabus1: generic device class power management enabled
atabus1: supported states: D0 D1 D3
ahcisata0: generic device class power management enabled
ahcisata0: supported states: D0 D3
ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR SMBus Controller (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 23 (irq 11)
iic0 at ichsmb0: I2C bus
iic0: WARNING: power management not supported
ichsmb0: WARNING: power management not supported
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: generic device class power management enabled
isapnp0: supported states: D0 D3
isa0: generic device class power management enabled
isa0: supported states: D0 D3
isapnp0: no ISA Plug 'n Play devices found
mainbus0: generic device class power management enabled
mainbus0: supported states: D0 D3
ioapic0: APICBASE 0xfee00900
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Analog Devices AD1981HD (rev. 2.0)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0)
azalia0: codec[1]: High Definition Audio rev. 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, independent
audio0: audio device class power management enabled
audio0: supported states: D0 D3
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-4083N, 0139599DAE72, 1.08> cdrom removable
cd0: WARNING: power management not supported
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
atapibus0: WARNING: power management not supported
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ahcisata0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus1 drive 0: <FUJITSU MHV2100BH>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568 sectors
wd0: WARNING: power management not supported
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ugen0 at uhub3 port 2
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
ugen0: WARNING: power management not supported
--IS0zKkzwUGydFO0o
Content-Type: text/plain; charset=us-ascii
Content-Description: dmesg-LAPTOP
Content-Disposition: attachment; filename=dmesg-laptop
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.29 (LAPTOP) #0: Sat Aug 18 10:26:33 CST 2007
bsd@monolith:/home/scratch/tmp/netbsd-jmcneill-pm/sys/arch/i386/compile/LAPTOP
total memory = 1022 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 994 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd6b0
SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
LENOVO 200762U (ThinkPad T60)
mainbus0 (root)
pci_addr_fixup: 000:31:1 0x8086 0x27df new address 0x00005800
pci_addr_fixup: 000:31:1 0x8086 0x27df new address 0x00005808
pci_addr_fixup: 000:31:1 0x8086 0x27df new address 0x00005810
pci_addr_fixup: 000:31:1 0x8086 0x27df new address 0x0000580c
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel Pentium M (Yonah) (686-class), 1995.09 MHz, id 0x6e8
cpu0: features bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 c1a9<SSE3,MONITOR,VMX,EST,TM2,xTPR,PDCM>
cpu0: "Genuine Intel(R) CPU T2500 @ 2.00GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: ITLB 128 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 128 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1404 mV) 2000 MHz
cpu0: unknown Enhanced SpeedStep CPU.
est_init_main: bus_clock = 16667
est_init_main: idlo = 0x613
est_init_main: lo 1004 mV, 1000 MHz
est_init_main: raw 19 , 6
est_init_main: idhi = 0xc2c
est_init_main: hi 1404 mV, 2000 MHz
est_init_main: raw 44 , 12
est_init_main: cur = 0xc2c
est_init_main: fake entry 0: 1404 mV, 2000 MHz MSR*100 mV = 1200 freq = 4400
est_init_main: fake entry 1: 1340 mV, 1833 MHz MSR*100 mV = 1100 freq = 3985
est_init_main: fake entry 2: 1276 mV, 1667 MHz MSR*100 mV = 1000 freq = 3570
est_init_main: fake entry 3: 1212 mV, 1500 MHz MSR*100 mV = 900 freq = 3155
est_init_main: fake entry 4: 1148 mV, 1333 MHz MSR*100 mV = 800 freq = 2740
est_init_main: fake entry 5: 1084 mV, 1167 MHz MSR*100 mV = 700 freq = 2325
est_init_main: fake entry 6: 1020 mV, 1000 MHz MSR*100 mV = 600 freq = 1910
cpu0: Enhanced SpeedStep frequencies available (MHz): 2000 1833 1667 1500 1333 1167 1000
cpu0: Intel(R) On Demand Clock Modulation (state disabled)
cpu0: calibrating local timer
cpu0: apic clock running at 166 MHz
cpu0: 64 page colors
cpu0: generic device class power management enabled
cpu0: supported states: D0 D3
cpu1 at mainbus0 apid 1: (application processor)
cpu1: not started
cpu1: generic device class power management enabled
cpu1: supported states: D0 D3
ioapic0 at mainbus0 apid 1
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2
ioapic0: remapped to apic 1
ioapic0: generic device class power management enabled
ioapic0: supported states: D0 D3
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <LENOVO,TP-79 ,00002030>, AslId < LTP,00000000>
acpi0: generic device class power management enabled
acpi0: supported states: D0 D3
acpi0: SCI interrupting at int 9
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b7d900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKA._STA] (Node 0xc1e77be0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKA._STA] (Node 0xc1e77be0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b7d900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKB._STA] (Node 0xc1e77ac0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKB._STA] (Node 0xc1e77ac0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b7d900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKC._STA] (Node 0xc1e779a0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKC._STA] (Node 0xc1e779a0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b7d900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKD._STA] (Node 0xc1e77880), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKD._STA] (Node 0xc1e77880), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b7d900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKE._STA] (Node 0xc1e77760), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKE._STA] (Node 0xc1e77760), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b7d900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKF._STA] (Node 0xc1e77640), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKF._STA] (Node 0xc1e77640), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b7d900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKG._STA] (Node 0xc1e77520), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKG._STA] (Node 0xc1e77520), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1b7d900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKH._STA] (Node 0xc1e77400), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKH._STA] (Node 0xc1e77400), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1e830c0) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.FDC_._STA] (Node 0xc1e7a440), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.FDC_._STA] (Node 0xc1e7a440), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1e78440) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1e867c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1e88a20), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.LURT._STA] (Node 0xc1e7a280), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.LURT._STA] (Node 0xc1e7a280), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSDL] (0xc1e78240) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.DURT._STA] (Node 0xc1e7a0c0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.DURT._STA] (Node 0xc1e7a0c0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1e78440) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1e867c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1e88a20), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.LLPT._STA] (Node 0xc1e7cf00), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.LLPT._STA] (Node 0xc1e7cf00), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSDL] (0xc1e78240) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.DLPT._STA] (Node 0xc1e7cd40), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.DLPT._STA] (Node 0xc1e7cd40), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1e78440) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1e867c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1e88a20), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.LECP._STA] (Node 0xc1e7cb80), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.LECP._STA] (Node 0xc1e7cb80), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSDL] (0xc1e78240) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.DECP._STA] (Node 0xc1e7ca00), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.DECP._STA] (Node 0xc1e7ca00), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1e830c0) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.FIR_._STA] (Node 0xc1e7c7a0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.FIR_._STA] (Node 0xc1e7c7a0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1e830c0) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.TPM_._STA] (Node 0xc1e7c600), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.TPM_._STA] (Node 0xc1e7c600), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1e830c0) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\SMI_] (Node 0xc1e8b3a0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\RBEC] (Node 0xc1e8b320), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc1e80520), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc1e80520), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1e830c0) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\SMI_] (Node 0xc1e8b3a0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\RBEC] (Node 0xc1e8b320), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc1e803a0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc1e803a0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1e78440) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1e867c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.IDE0.PRIM.MSTR._STA] (Node 0xc1e85aa0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.IDE0.PRIM.MSTR._STA] (Node 0xc1e85aa0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSIO] (0xc1e781c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK.GGID] (Node 0xc1e88ea0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK._UID] (Node 0xc1e88f40), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.GDCK._UID] (Node 0xc1e88f40), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSIO] (0xc1e781c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK.GGID] (Node 0xc1e88ea0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK._STA] (Node 0xc1e86060), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.GDCK._STA] (Node 0xc1e86060), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1e78440) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1e867c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1e88a20), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LCIO._STA] (Node 0xc1e88a20), AE_NOT_EXIST
acpi0: found ECDT, GPE 28
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKE (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKF (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKG (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKH (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
MEM (PNP0C01) [System Board] at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpilid0: generic device class power management enabled
acpilid0: supported states: D0 D3
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut0: generic device class power management enabled
acpibut0: supported states: D0 D3
PCI0 (PNP0A08) [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
SIO (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
attimer1: generic device class power management enabled
attimer1: supported states: D0 D3
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff
hpet0: Found 64-bits HPET, will only use lowest 32-bits
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
hpet0: generic device class power management enabled
hpet0: supported states: D0 D3
DMAC (PNP0200) [AT DMA Controller] at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
midi0: WARNING: power management not supported
sysbeep0 at pcppi1
sysbeep0: WARNING: power management not supported
pcppi1: WARNING: power management not supported
npx1 at acpi0 (FPU, PNP0C04)
npx1: io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
npx1: generic device class power management enabled
npx1: supported states: D0 D3
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
pckbc1 at acpi0 (KBD, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc1: generic device class power management enabled
pckbc1: supported states: D0 D3
pckbc2 at acpi0 (MOU, IBM0057): aux port
pckbc2: irq 12
pckbc2: generic device class power management enabled
pckbc2: supported states: D0 D3
TPM (ATM1200) at acpi0 not configured
acpiec0 at acpi0 (EC, PNP0C09-0): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpiec0: generic device class power management enabled
acpiec0: supported states: D0 D3
PUBS (ACPI Object Type 'Power' [0x0b]) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: generic device class power management enabled
acpibat0: supported states: D0 D3
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
acpiacad0: generic device class power management enabled
acpiacad0: supported states: D0 D3
HKEY (IBM0068) at acpi0 not configured
acpitz0 at acpi0 (THM0): ACPI Thermal Zone
acpitz0: passive cooling mode only
acpitz0: critical 127.0C
acpitz0: generic device class power management enabled
acpitz0: supported states: D0 D3
acpitz1 at acpi0 (THM1): ACPI Thermal Zone
acpitz1: critical 99.0C passive 94.5C
acpitz1: generic device class power management enabled
acpitz1: supported states: D0 D3
apm0 at acpi0: Power Management spec V1.2
acpibat0: battery info: SANYO, LION, 92P1137 768
acpiacad0: AC adapter online.
apm0: generic device class power management enabled
apm0: supported states: D0 D3
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
pckbd0: generic device class power management enabled
pckbd0: supported states: D0 D1 D3
wskbd0 at pckbd0: console keyboard
wskbd0: generic device class power management enabled
wskbd0: supported states: D0 D3
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse0: generic device class power management enabled
wsmouse0: supported states: D0 D3
pms0: generic device class power management enabled
pms0: supported states: D0 D3
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pci0: generic device class power management enabled
pci0: supported states: D0 D3
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03)
pchb0: generic device class power management enabled
pchb0: supported states: D0 D3
agp0 at pchb0: can't find internal VGA device config space
agp0: generic device class power management enabled
agp0: supported states: D0 D3
ppb0 at pci0 dev 1 function 0: Intel product 0x27a1 (rev. 0x03)
ppb0: generic device class power management enabled
ppb0: supported states: D0 D3
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
pci1: generic device class power management enabled
pci1: supported states: D0 D3
vga1 at pci1 dev 0 function 0: ATI Technologies product 0x7145 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: generic device class power management enabled
wsdisplay0: supported states: D0 D3
vga1: display device class power management enabled
vga1: supported states: D0 D3
direct rendering for vga1 unsupported
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 17 (irq 11)
azalia0: generic device class power management enabled
azalia0: supported states: D0 D3
azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
ppb1 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x02)
ppb1: generic device class power management enabled
ppb1: supported states: D0 D3
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
pci2: generic device class power management enabled
pci2: supported states: D0 D3
wm0 at pci2 dev 0 function 0: Intel i82573L Gigabit Ethernet, rev. 0
wm0: interrupting at ioapic0 pin 16 (irq 11)
wm0: PCI-Express bus
wm0: 256 word (8 address bits) SPI EEPROM
wm0: Ethernet address 00:16:41:53:a7:2f
makphy0 at wm0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
makphy0: WARNING: power management not supported
wm0: network device class power management enabled
wm0: supported states: D0 D3
ppb2 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x02)
ppb2: generic device class power management enabled
ppb2: supported states: D0 D3
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
pci3: generic device class power management enabled
pci3: supported states: D0 D3
ath0 at pci3 dev 0 function 0
ath0: interrupting at ioapic0 pin 17 (irq 11)
ath0: WARNING: powerhook_establish is deprecated
ath0: WARNING: powerhook_establish is deprecated
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 10.3 phy 6.1 radio 10.2
ath0: WARNING: power management not supported
ppb3 at pci0 dev 28 function 2: Intel 82801GB/GR PCI Express Port #3 (rev. 0x02)
ppb3: generic device class power management enabled
ppb3: supported states: D0 D3
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
pci4: generic device class power management enabled
pci4: supported states: D0 D3
ppb4 at pci0 dev 28 function 3: Intel 82801GB/GR PCI Express Port #4 (rev. 0x02)
ppb4: generic device class power management enabled
ppb4: supported states: D0 D3
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
pci5: generic device class power management enabled
pci5: supported states: D0 D3
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
uhci0: generic device class power management enabled
uhci0: supported states: D0 D3
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: generic device class power management enabled
uhub0: supported states: D0 D3
usb0: WARNING: power management not supported
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 17 (irq 11)
uhci1: generic device class power management enabled
uhci1: supported states: D0 D3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: generic device class power management enabled
uhub1: supported states: D0 D3
usb1: WARNING: power management not supported
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18 (irq 11)
uhci2: generic device class power management enabled
uhci2: supported states: D0 D3
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub2: generic device class power management enabled
uhub2: supported states: D0 D3
usb2: WARNING: power management not supported
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19 (irq 11)
uhci3: generic device class power management enabled
uhci3: supported states: D0 D3
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub3: generic device class power management enabled
uhub3: supported states: D0 D3
usb3: WARNING: power management not supported
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 19 (irq 11)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
ehci0: generic device class power management enabled
ehci0: supported states: D0 D3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub4: generic device class power management enabled
uhub4: supported states: D0 D3
usb4: WARNING: power management not supported
ppb5 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2)
ppb5: generic device class power management enabled
ppb5: supported states: D0 D3
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled
pci6: generic device class power management enabled
pci6: supported states: D0 D3
cbb0 at pci6 dev 0 function 0: Texas Instruments PCI1510 PCI-CardBus Bridge (rev. 0x00)
cbb0: WARNING: power management not supported
cbb0: interrupting at ioapic0 pin 16 (irq 11)
cbb0: WARNING: powerhook_establish is deprecated
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 7
cardbus0: WARNING: power management not supported
pcmcia0 at cardslot0
pcmcia0: WARNING: power management not supported
cardslot0: WARNING: power management not supported
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801GBM LPC Interface Bridge (rev. 0x02)
pcib0: generic device class power management enabled
pcib0: supported states: D0 D3
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
atabus0: generic device class power management enabled
atabus0: supported states: D0 D1 D3
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide0: generic device class power management enabled
piixide0: supported states: D0 D3
ahcisata0 at pci0 dev 31 function 2: Intel 82801GBM AHCI SATA Controller
ahcisata0: interrupting at ioapic0 pin 16 (irq 11)
ahcisata0: AHCI revision 1.1, 4 ports, 32 command slots, features 0xc710e000
atabus1 at ahcisata0 channel 0
atabus1: generic device class power management enabled
atabus1: supported states: D0 D1 D3
ahcisata0: generic device class power management enabled
ahcisata0: supported states: D0 D3
ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR SMBus Controller (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 23 (irq 11)
iic0 at ichsmb0: I2C bus
iic0: WARNING: power management not supported
ichsmb0: WARNING: power management not supported
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: generic device class power management enabled
isapnp0: supported states: D0 D3
isa0: generic device class power management enabled
isa0: supported states: D0 D3
isapnp0: no ISA Plug 'n Play devices found
mainbus0: generic device class power management enabled
mainbus0: supported states: D0 D3
ioapic0: APICBASE 0xfee00900
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Analog Devices AD1981HD (rev. 2.0)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0)
azalia0: codec[1]: High Definition Audio rev. 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, independent
audio0: audio device class power management enabled
audio0: supported states: D0 D3
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-4083N, 0139599DAE72, 1.08> cdrom removable
cd0: WARNING: power management not supported
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
atapibus0: WARNING: power management not supported
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ahcisata0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus1 drive 0: <FUJITSU MHV2100BH>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568 sectors
wd0: WARNING: power management not supported
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
ehci0: handing over full speed device on port 8 to uhci3
uhub4: port 8, device disappeared after reset
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ugen0 at uhub3 port 2
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
ugen0: WARNING: power management not supported
--IS0zKkzwUGydFO0o
Content-Type: text/plain; charset=us-ascii
Content-Description: dmesg-LAPTOP.MP
Content-Disposition: attachment; filename="dmesg-laptop.mp"
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.29 (LAPTOP.MP) #1: Sat Aug 18 10:06:38 CST 2007
bsd@monolith:/home/scratch/tmp/netbsd-jmcneill-pm/sys/arch/i386/compile/LAPTOP.MP
total memory = 1022 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 994 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd6b0
SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
LENOVO 200762U (ThinkPad T60)
mainbus0 (root)
pci_addr_fixup: 000:31:1 0x8086 0x27df new address 0x00005800
pci_addr_fixup: 000:31:1 0x8086 0x27df new address 0x00005808
pci_addr_fixup: 000:31:1 0x8086 0x27df new address 0x00005810
pci_addr_fixup: 000:31:1 0x8086 0x27df new address 0x0000580c
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel Pentium M (Yonah) (686-class), 1995.14 MHz, id 0x6e8
cpu0: features bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 c1a9<SSE3,MONITOR,VMX,EST,TM2,xTPR,PDCM>
cpu0: "Genuine Intel(R) CPU T2500 @ 2.00GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: ITLB 128 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 128 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1404 mV) 2000 MHz
cpu0: unknown Enhanced SpeedStep CPU.
est_init_main: bus_clock = 16667
est_init_main: idlo = 0x613
est_init_main: lo 1004 mV, 1000 MHz
est_init_main: raw 19 , 6
est_init_main: idhi = 0xc2c
est_init_main: hi 1404 mV, 2000 MHz
est_init_main: raw 44 , 12
est_init_main: cur = 0xc2c
est_init_main: fake entry 0: 1404 mV, 2000 MHz MSR*100 mV = 1200 freq = 4400
est_init_main: fake entry 1: 1340 mV, 1833 MHz MSR*100 mV = 1100 freq = 3985
est_init_main: fake entry 2: 1276 mV, 1667 MHz MSR*100 mV = 1000 freq = 3570
est_init_main: fake entry 3: 1212 mV, 1500 MHz MSR*100 mV = 900 freq = 3155
est_init_main: fake entry 4: 1148 mV, 1333 MHz MSR*100 mV = 800 freq = 2740
est_init_main: fake entry 5: 1084 mV, 1167 MHz MSR*100 mV = 700 freq = 2325
est_init_main: fake entry 6: 1020 mV, 1000 MHz MSR*100 mV = 600 freq = 1910
cpu0: Enhanced SpeedStep frequencies available (MHz): 2000 1833 1667 1500 1333 1167 1000
cpu0: Intel(R) On Demand Clock Modulation (state disabled)
cpu0: calibrating local timer
cpu0: apic clock running at 166 MHz
cpu0: 64 page colors
cpu0: generic device class power management enabled
cpu0: supported states: D0 D3
cpu1 at mainbus0 apid 1: (application processor)
cpu1: Intel Pentium M (Yonah) (686-class), 1995.00 MHz, id 0x6e8
cpu1: features bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu1: features bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 c1a9<SSE3,MONITOR,VMX,EST,TM2,xTPR,PDCM>
cpu1: "Genuine Intel(R) CPU T2500 @ 2.00GHz"
cpu1: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu1: L2 cache 2 MB 64B/line 8-way
cpu1: ITLB 128 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 128 4 KB entries 4-way, 8 4 MB entries 4-way
cpu1: using thermal monitor 1
cpu1: generic device class power management enabled
cpu1: supported states: D0 D3
ioapic0 at mainbus0 apid 1
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2
ioapic0: remapped to apic 1
ioapic0: generic device class power management enabled
ioapic0: supported states: D0 D3
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <LENOVO,TP-79 ,00002030>, AslId < LTP,00000000>
acpi0: generic device class power management enabled
acpi0: supported states: D0 D3
acpi0: SCI interrupting at int 9
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c95900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKA._STA] (Node 0xc1f8fbe0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKA._STA] (Node 0xc1f8fbe0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c95900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKB._STA] (Node 0xc1f8fac0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKB._STA] (Node 0xc1f8fac0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c95900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKC._STA] (Node 0xc1f8f9a0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKC._STA] (Node 0xc1f8f9a0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c95900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKD._STA] (Node 0xc1f8f880), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKD._STA] (Node 0xc1f8f880), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c95900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKE._STA] (Node 0xc1f8f760), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKE._STA] (Node 0xc1f8f760), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c95900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKF._STA] (Node 0xc1f8f640), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKF._STA] (Node 0xc1f8f640), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c95900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKG._STA] (Node 0xc1f8f520), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKG._STA] (Node 0xc1f8f520), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [LPCS] (0xc1c95900) [PCI_Config] [20060217]
ACPI Error (exfldio-0381): Region PCI_Config(2) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LNKH._STA] (Node 0xc1f8f400), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LNKH._STA] (Node 0xc1f8f400), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1f9b0c0) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.FDC_._STA] (Node 0xc1f92440), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.FDC_._STA] (Node 0xc1f92440), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1f90440) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1f9e7c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1fa0a20), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.LURT._STA] (Node 0xc1f92280), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.LURT._STA] (Node 0xc1f92280), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSDL] (0xc1f90240) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.DURT._STA] (Node 0xc1f920c0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.DURT._STA] (Node 0xc1f920c0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1f90440) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1f9e7c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1fa0a20), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.LLPT._STA] (Node 0xc1f94f00), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.LLPT._STA] (Node 0xc1f94f00), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSDL] (0xc1f90240) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.DLPT._STA] (Node 0xc1f94d40), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.DLPT._STA] (Node 0xc1f94d40), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1f90440) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1f9e7c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1fa0a20), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.LECP._STA] (Node 0xc1f94b80), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.LECP._STA] (Node 0xc1f94b80), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSDL] (0xc1f90240) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.DECP._STA] (Node 0xc1f94a00), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.DECP._STA] (Node 0xc1f94a00), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1f9b0c0) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.FIR_._STA] (Node 0xc1f947a0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.FIR_._STA] (Node 0xc1f947a0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1f9b0c0) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.TPM_._STA] (Node 0xc1f94600), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.TPM_._STA] (Node 0xc1f94600), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1f9b0c0) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\SMI_] (Node 0xc1fa33a0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\RBEC] (Node 0xc1fa3320), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc1f98520), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc1f98520), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [MNVS] (0xc1f9b0c0) [SystemMemory] [20060217]
ACPI Error (exfldio-0381): Region SystemMemory(0) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\SMI_] (Node 0xc1fa33a0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\RBEC] (Node 0xc1fa3320), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc1f983a0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc1f983a0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1f90440) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1f9e7c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.IDE0.PRIM.MSTR._STA] (Node 0xc1f9daa0), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.PCI0.IDE0.PRIM.MSTR._STA] (Node 0xc1f9daa0), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSIO] (0xc1f901c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK.GGID] (Node 0xc1fa0ea0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK._UID] (Node 0xc1fa0f40), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.GDCK._UID] (Node 0xc1fa0f40), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [NSIO] (0xc1f901c0) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Exception (dswexec-0568): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK.GGID] (Node 0xc1fa0ea0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.GDCK._STA] (Node 0xc1f9e060), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.GDCK._STA] (Node 0xc1f9e060), AE_NOT_EXIST
ACPI Error (evregion-0415): No handler for Region [IMGA] (0xc1f90440) [SystemIO] [20060217]
ACPI Error (exfldio-0381): Region SystemIO(1) has no handler [20060217]
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1f9e7c0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.LCIO._STA] (Node 0xc1fa0a20), AE_NOT_EXIST
ACPI Error (uteval-0255): Method execution failed [\_SB_.LCIO._STA] (Node 0xc1fa0a20), AE_NOT_EXIST
acpi0: found ECDT, GPE 28
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKE (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKF (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKG (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKH (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
MEM (PNP0C01) [System Board] at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpilid0: generic device class power management enabled
acpilid0: supported states: D0 D3
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut0: generic device class power management enabled
acpibut0: supported states: D0 D3
PCI0 (PNP0A08) [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
SIO (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
attimer1: generic device class power management enabled
attimer1: supported states: D0 D3
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff
hpet0: Found 64-bits HPET, will only use lowest 32-bits
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
hpet0: generic device class power management enabled
hpet0: supported states: D0 D3
DMAC (PNP0200) [AT DMA Controller] at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
midi0: WARNING: power management not supported
sysbeep0 at pcppi1
sysbeep0: WARNING: power management not supported
pcppi1: WARNING: power management not supported
npx1 at acpi0 (FPU, PNP0C04)
npx1: io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
npx1: generic device class power management enabled
npx1: supported states: D0 D3
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
pckbc1 at acpi0 (KBD, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc1: generic device class power management enabled
pckbc1: supported states: D0 D3
pckbc2 at acpi0 (MOU, IBM0057): aux port
pckbc2: irq 12
pckbc2: generic device class power management enabled
pckbc2: supported states: D0 D3
TPM (ATM1200) at acpi0 not configured
acpiec0 at acpi0 (EC, PNP0C09-0): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpiec0: generic device class power management enabled
acpiec0: supported states: D0 D3
PUBS (ACPI Object Type 'Power' [0x0b]) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: generic device class power management enabled
acpibat0: supported states: D0 D3
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
acpiacad0: generic device class power management enabled
acpiacad0: supported states: D0 D3
HKEY (IBM0068) at acpi0 not configured
acpitz0 at acpi0 (THM0): ACPI Thermal Zone
acpitz0: passive cooling mode only
acpitz0: critical 127.0C
acpitz0: generic device class power management enabled
acpitz0: supported states: D0 D3
acpitz1 at acpi0 (THM1): ACPI Thermal Zone
acpitz1: critical 99.0C passive 94.5C
acpitz1: generic device class power management enabled
acpitz1: supported states: D0 D3
apm0 at acpi0: Power Management spec V1.2
acpibat0: battery info: SANYO, LION, 92P1137 768
acpiacad0: AC adapter online.
apm0: generic device class power management enabled
apm0: supported states: D0 D3
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
pckbd0: generic device class power management enabled
pckbd0: supported states: D0 D1 D3
wskbd0 at pckbd0: console keyboard
wskbd0: generic device class power management enabled
wskbd0: supported states: D0 D3
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse0: generic device class power management enabled
wsmouse0: supported states: D0 D3
pms0: generic device class power management enabled
pms0: supported states: D0 D3
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pci0: generic device class power management enabled
pci0: supported states: D0 D3
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03)
pchb0: generic device class power management enabled
pchb0: supported states: D0 D3
agp0 at pchb0: can't find internal VGA device config space
agp0: generic device class power management enabled
agp0: supported states: D0 D3
ppb0 at pci0 dev 1 function 0: Intel product 0x27a1 (rev. 0x03)
ppb0: generic device class power management enabled
ppb0: supported states: D0 D3
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
pci1: generic device class power management enabled
pci1: supported states: D0 D3
vga1 at pci1 dev 0 function 0: ATI Technologies product 0x7145 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: generic device class power management enabled
wsdisplay0: supported states: D0 D3
vga1: display device class power management enabled
vga1: supported states: D0 D3
direct rendering for vga1 unsupported
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 17 (irq 11)
azalia0: generic device class power management enabled
azalia0: supported states: D0 D3
azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
ppb1 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x02)
ppb1: generic device class power management enabled
ppb1: supported states: D0 D3
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
pci2: generic device class power management enabled
pci2: supported states: D0 D3
wm0 at pci2 dev 0 function 0: Intel i82573L Gigabit Ethernet, rev. 0
wm0: interrupting at ioapic0 pin 16 (irq 11)
wm0: PCI-Express bus
wm0: 256 word (8 address bits) SPI EEPROM
wm0: Ethernet address 00:16:41:53:a7:2f
makphy0 at wm0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
makphy0: WARNING: power management not supported
wm0: network device class power management enabled
wm0: supported states: D0 D3
ppb2 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x02)
ppb2: generic device class power management enabled
ppb2: supported states: D0 D3
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
pci3: generic device class power management enabled
pci3: supported states: D0 D3
ath0 at pci3 dev 0 function 0
ath0: interrupting at ioapic0 pin 17 (irq 11)
ath0: WARNING: powerhook_establish is deprecated
ath0: WARNING: powerhook_establish is deprecated
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 10.3 phy 6.1 radio 10.2
ath0: WARNING: power management not supported
ppb3 at pci0 dev 28 function 2: Intel 82801GB/GR PCI Express Port #3 (rev. 0x02)
ppb3: generic device class power management enabled
ppb3: supported states: D0 D3
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
pci4: generic device class power management enabled
pci4: supported states: D0 D3
ppb4 at pci0 dev 28 function 3: Intel 82801GB/GR PCI Express Port #4 (rev. 0x02)
ppb4: generic device class power management enabled
ppb4: supported states: D0 D3
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
pci5: generic device class power management enabled
pci5: supported states: D0 D3
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
uhci0: generic device class power management enabled
uhci0: supported states: D0 D1 D3
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: generic device class power management enabled
uhub0: supported states: D0 D3
usb0: WARNING: power management not supported
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 17 (irq 11)
uhci1: generic device class power management enabled
uhci1: supported states: D0 D1 D3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: generic device class power management enabled
uhub1: supported states: D0 D3
usb1: WARNING: power management not supported
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18 (irq 11)
uhci2: generic device class power management enabled
uhci2: supported states: D0 D1 D3
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub2: generic device class power management enabled
uhub2: supported states: D0 D3
usb2: WARNING: power management not supported
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19 (irq 11)
uhci3: generic device class power management enabled
uhci3: supported states: D0 D1 D3
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub3: generic device class power management enabled
uhub3: supported states: D0 D3
usb3: WARNING: power management not supported
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 19 (irq 11)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
ehci0: generic device class power management enabled
ehci0: supported states: D0 D3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub4: generic device class power management enabled
uhub4: supported states: D0 D3
usb4: WARNING: power management not supported
ppb5 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2)
ppb5: generic device class power management enabled
ppb5: supported states: D0 D3
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled
pci6: generic device class power management enabled
pci6: supported states: D0 D3
cbb0 at pci6 dev 0 function 0: Texas Instruments PCI1510 PCI-CardBus Bridge (rev. 0x00)
cbb0: WARNING: power management not supported
cbb0: interrupting at ioapic0 pin 16 (irq 11)
cbb0: WARNING: powerhook_establish is deprecated
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 7
cardbus0: WARNING: power management not supported
pcmcia0 at cardslot0
pcmcia0: WARNING: power management not supported
cardslot0: WARNING: power management not supported
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801GBM LPC Interface Bridge (rev. 0x02)
pcib0: generic device class power management enabled
pcib0: supported states: D0 D3
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
atabus0: generic device class power management enabled
atabus0: supported states: D0 D1 D3
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide0: generic device class power management enabled
piixide0: supported states: D0 D1 D3
ahcisata0 at pci0 dev 31 function 2: Intel 82801GBM AHCI SATA Controller
ahcisata0: interrupting at ioapic0 pin 16 (irq 11)
ahcisata0: AHCI revision 1.1, 4 ports, 32 command slots, features 0xc710e000
atabus1 at ahcisata0 channel 0
atabus1: generic device class power management enabled
atabus1: supported states: D0 D1 D3
ahcisata0: generic device class power management enabled
ahcisata0: supported states: D0 D3
ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR SMBus Controller (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 23 (irq 11)
iic0 at ichsmb0: I2C bus
iic0: WARNING: power management not supported
ichsmb0: WARNING: power management not supported
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: generic device class power management enabled
isapnp0: supported states: D0 D3
isa0: generic device class power management enabled
isa0: supported states: D0 D3
isapnp0: no ISA Plug 'n Play devices found
mainbus0: generic device class power management enabled
mainbus0: supported states: D0 D3
ioapic0: APICBASE 0xfee00900
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Analog Devices AD1981HD (rev. 2.0)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0)
azalia0: codec[1]: High Definition Audio rev. 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, independent
audio0: audio device class power management enabled
audio0: supported states: D0 D3
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-4083N, 0139599DAE72, 1.08> cdrom removable
cd0: WARNING: power management not supported
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
atapibus0: WARNING: power management not supported
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ahcisata0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus1 drive 0: <FUJITSU MHV2100BH>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568 sectors
wd0: WARNING: power management not supported
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
ehci0: handing over full speed device on port 8 to uhci3
uhub4: port 8, device disappeared after reset
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ugen0 at uhub3 port 2
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
ugen0: WARNING: power management not supported
--IS0zKkzwUGydFO0o
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="t60.dmi"
# dmidecode 2.8
SMBIOS 2.4 present.
68 structures occupying 2248 bytes.
Table at 0x000E0010.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: LENOVO
Version: 79ETC3WW (2.03 )
Release Date: 11/10/2006
Address: 0xDC000
Runtime Size: 144 kB
ROM Size: 2048 kB
Characteristics:
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
BIOS Revision: 2.3
Firmware Revision: 1.7
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: LENOVO
Product Name: 200762U
Version: ThinkPad T60
Serial Number: L3G3252
UUID: 06A74E81-47E2-11CB-8110-BCDEC7512E39
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: ThinkPad T60
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: LENOVO
Product Name: 200762U
Version: Not Available
Serial Number: VF05765516A
Handle 0x0003, DMI type 3, 13 bytes
Chassis Information
Manufacturer: LENOVO
Type: Notebook
Lock: Not Present
Version: Not Available
Serial Number: Not Available
Asset Tag: No Asset Information
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
Handle 0x0004, DMI type 126, 13 bytes
Inactive
Handle 0x0005, DMI type 126, 13 bytes
Inactive
Handle 0x0006, DMI type 4, 35 bytes
Processor Information
Socket Designation: None
Type: Central Processor
Family: Pentium M
Manufacturer: GenuineIntel
ID: E8 06 00 00 FF FB E9 BF
Signature: Type 0, Family 6, Model 14, Stepping 8
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Genuine Intel(R) CPU
Voltage: 1.4 V
External Clock: 167 MHz
Max Speed: 2000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: None
L1 Cache Handle: 0x000A
L2 Cache Handle: 0x000C
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0007, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 2048 MB
Maximum Total Memory Size: 4096 MB
Supported Speeds:
Other
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 2.9 V
Associated Memory Slots: 2
0x0008
0x0009
Enabled Error Correcting Capabilities:
Unknown
Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM Slot 1
Bank Connections: 0 3
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM Slot 2
Bank Connections: 4 7
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x000A, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 64 KB
Maximum Size: 64 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Instruction
Associativity: 8-way Set-associative
Handle 0x000B, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 64 KB
Maximum Size: 64 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 8-way Set-associative
Handle 0x000C, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 KB
Maximum Size: 2048 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: Infrared
External Connector Type: Infrared
Port Type: Other
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: External Monitor
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: Microphone Jack
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: Headphone Jack
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0011, DMI type 126, 9 bytes
Inactive
Handle 0x0012, DMI type 126, 9 bytes
Inactive
Handle 0x0013, DMI type 126, 9 bytes
Inactive
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: Ethernet
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: USB 1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: USB 2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: USB 3
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0018, DMI type 126, 9 bytes
Inactive
Handle 0x0019, DMI type 126, 9 bytes
Inactive
Handle 0x001A, DMI type 126, 9 bytes
Inactive
Handle 0x001B, DMI type 126, 9 bytes
Inactive
Handle 0x001C, DMI type 126, 9 bytes
Inactive
Handle 0x001D, DMI type 126, 9 bytes
Inactive
Handle 0x001E, DMI type 126, 9 bytes
Inactive
Handle 0x001F, DMI type 126, 9 bytes
Inactive
Handle 0x0020, DMI type 9, 13 bytes
System Slot Information
Designation: ExpressCard Slot 1
Type: x1 PCI Express
Current Usage: Available
Length: Other
Characteristics:
Hot-plug devices are supported
Handle 0x0021, DMI type 9, 13 bytes
System Slot Information
Designation: CardBus Slot 1
Type: 32-bit PC Card (PCMCIA)
Current Usage: Available
Length: Other
ID: Adapter 1, Socket 0
Characteristics:
5.0 V is provided
3.3 V is provided
PC Card-16 is supported
Cardbus is supported
Zoom Video is supported
Modem ring resume is supported
PME signal is supported
Hot-plug devices are supported
Handle 0x0022, DMI type 126, 13 bytes
Inactive
Handle 0x0023, DMI type 126, 13 bytes
Inactive
Handle 0x0024, DMI type 126, 13 bytes
Inactive
Handle 0x0025, DMI type 10, 6 bytes
On Board Device Information
Type: Other
Status: Enabled
Description: IBM Embedded Security hardware
Handle 0x0026, DMI type 11, 5 bytes
OEM Strings
String 1: IBM ThinkPad Embedded Controller -[79HT50WW-1.07 ]-
Handle 0x0027, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 1
enUS
Currently Installed Language: enUS
Handle 0x0028, DMI type 15, 25 bytes
System Event Log
Area Length: 0 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Valid, Invalid
Change Token: 0x000000FF
Header Format: Type 1
Supported Log Type Descriptors: 1
Descriptor 1: POST error
Data Format 1: POST results bitmap
Handle 0x0029, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 2 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x002A, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0029
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: SODIMM
Set: None
Locator: DIMM 1
Bank Locator: Bank 0/1
Type: DDR2
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002B, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0029
Error Information Handle: No Error
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: SODIMM
Set: None
Locator: DIMM 2
Bank Locator: Bank 2/3
Type: DDR2
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002C, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown
Handle 0x002D, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x0029
Partition Width: 0
Handle 0x002E, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x002A
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: 1
Handle 0x002F, DMI type 126, 19 bytes
Inactive
Handle 0x0030, DMI type 21, 7 bytes
Built-in Pointing Device
Type: Track Point
Interface: PS/2
Buttons: 3
Handle 0x0031, DMI type 21, 7 bytes
Built-in Pointing Device
Type: Touch Pad
Interface: PS/2
Buttons: 0
Handle 0x0032, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Enabled
Keyboard Password Status: Disabled
Administrator Password Status: Disabled
Front Panel Reset Status: Unknown
Handle 0x0033, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0034, DMI type 131, 17 bytes
OEM-specific Type
Header and Data:
83 11 34 00 01 02 03 FF FF 1F 00 00 00 00 00 02
00
Strings:
BOOTINF 20h
BOOTDEV 21h
KEYPTRS 23h
Handle 0x0035, DMI type 131, 11 bytes
OEM-specific Type
Header and Data:
83 0B 35 00 00 00 E8 FF C5 01 01
Strings:
IBM System Metrics
Handle 0x0036, DMI type 131, 22 bytes
OEM-specific Type
Header and Data:
83 16 36 00 01 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 01
Strings:
TVT-Enablement
Handle 0x0037, DMI type 132, 7 bytes
OEM-specific Type
Header and Data:
84 07 37 00 02 D8 36
Handle 0x0038, DMI type 133, 5 bytes
OEM-specific Type
Header and Data:
85 05 38 00 01
Strings:
KHOIHGIUCCHHII
Handle 0x0039, DMI type 133, 17 bytes
OEM-specific Type
Header and Data:
85 11 39 00 30 30 2E 35 00 60 EF 3F 00 00 00 00
01
Strings:
Audit Boot History
Handle 0x003A, DMI type 134, 13 bytes
OEM-specific Type
Header and Data:
86 0D 3A 00 10 05 06 20 00 00 00 00 00
Handle 0x003B, DMI type 134, 16 bytes
OEM-specific Type
Header and Data:
86 10 3B 00 00 41 54 4D 4C 01 01 00 00 03 01 02
Strings:
TPM INFO
System Reserved
Handle 0x003C, DMI type 135, 13 bytes
OEM-specific Type
Header and Data:
87 0D 3C 00 54 50 07 00 01 00 00 00 00
Handle 0x003D, DMI type 135, 18 bytes
OEM-specific Type
Header and Data:
87 12 3D 00 54 50 07 01 01 A3 01 00 00 00 00 00
00 00
Handle 0x003E, DMI type 135, 35 bytes
OEM-specific Type
Header and Data:
87 23 3E 00 54 50 07 02 42 41 59 20 49 2F 4F 20
01 00 02 00 00 0B 00 C8 18 AE 18 02 00 0E 00 F0
01 F6 03
Handle 0x003F, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 3F 00 5A 5A
Handle 0x0040, DMI type 137, 26 bytes
OEM-specific Type
Header and Data:
89 1A 40 00 0A 01 00 01 00 00 50 57 4D 53 20 49
6E 66 6F 72 6D 61 74 69 6F 6E
Handle 0x0041, DMI type 138, 40 bytes
OEM-specific Type
Header and Data:
8A 28 41 00 14 01 02 01 40 02 01 40 02 01 40 02
01 40 00 00 42 49 4F 53 20 50 61 73 73 77 6F 72
64 20 46 6F 72 6D 61 74
Handle 0x0042, DMI type 139, 37 bytes
OEM-specific Type
Header and Data:
8B 25 42 00 11 01 0A 00 00 00 00 00 00 00 00 00
00 50 57 4D 53 20 4B 65 79 20 49 6E 66 6F 72 6D
61 74 69 6F 6E
Handle 0x0043, DMI type 127, 4 bytes
End Of Table
--IS0zKkzwUGydFO0o--