much thanks again
i'll try your tips tonight, i couldn't figure out much what to change and where

On 5/21/07, Chavdar Ivanov <ci4ic4@gmail.com> wrote:
> On 20/05/07, fgh salle <pikapika@8-0.net> wrote:
> > thanks for the second time for your help ;)
>
> Not much of a help yet...
>
> > i have :
> > dmesg |grep azalia                                 [ 23:49:50 ]
> > azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
> > azalia0: interrupting at irq 11
> > azalia0: host: Intel 82801FB/FR High Definition Audio Controller (rev. 4)
> > azalia0: host: High Definition Audio rev. 1.0
> > azalia0: codec[0]: Realtek ALC880 (rev. 5.0)
>
> Mine is much simpler AD1981HD.
>
> > azalia0: codec[0]: High Definition Audio rev. 0.9
> > azalia0: playback: max channels=8, encodings=1<PCM>
>
> ...just 2 channels here...
>
> > azalia0: playback: PCM
> > formats=e0560<24bit,20bit,16bit,192kHz,96kHz,48kHz,44.1kHz>
> > azalia0: recording: max channels=4, encodings=1<PCM>
> > azalia0: recording: PCM formats=60160<20bit,16bit,96kHz,48kHz,44.1kHz>
> > azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0)
> > azalia0: codec[1]: High Definition Audio rev. 0.9
> > azalia0: codec[1]: No support for modem function groups
> > azalia0: codec[1] has no audio function groups
> > audio0 at azalia0: full duplex, independent
> >
> > and
> >  mixerctl -av                                         [ 23:50:29 ]
>
> I couldn't figure any thing out of this output. I would try some of
> the following parameters,
> like changing the sources etc.
>
> > record.surround.source=line1  [ mic1 mic2 line1 line2 cd ]
> > record.surround.mute=off  [ off on ]
> > record.surround=123,123  delta=7
> > record.front.source=cd  [ mic1 mic2 line1 line2 cd ]
> > record.front.mute=off  [ off on ]
> > record.front=123,123  delta=7
> > inputs.mic1.mute=off  [ off on ]
> > inputs.mic1=125,125  delta=3
> > inputs.mic2.mute=off  [ off on ]
> > inputs.mic2=125,125  delta=3
> > inputs.line1.mute=off  [ off on ]
> > inputs.line1=125,125  delta=3
> > inputs.line2.mute=off  [ off on ]
> > inputs.line2=125,125  delta=3
> > inputs.cd.mute=off  [ off on ]
> > inputs.cd=125,125  delta=3
> > record.surround.mute=off  [ off on ]
> > record.surround=123,123  delta=7
> > record.front.source=cd  [ mic1 mic2 line1 line2 cd ]
> > record.front.mute=off  [ off on ]
> > record.front=123,123  delta=7
> > inputs.mic1.mute=off  [ off on ]
> > inputs.mic1=125,125  delta=3
> > inputs.mic2.mute=off  [ off on ]
> > inputs.mic2=125,125  delta=3
> > inputs.line1.mute=off  [ off on ]
> > inputs.line1=125,125  delta=3
> > inputs.line2.mute=off  [ off on ]
> > inputs.line2=125,125  delta=3
> > inputs.cd.mute=off  [ off on ]
> > inputs.cd=125,125  delta=3
> > inputs.speaker.mute=off  [ off on ]
> > inputs.speaker=125  delta=3
> > outputs.master=123,123  delta=3
>
> mixerctl -w outputs.master=255
>
> > inputs.front.dac.mute=off  [ off on ]
> > inputs.front.mixer.mute=off  [ off on ]
> > outputs.surround=123,123  delta=3
> > outputs.clfe=123,123  delta=3
> > outputs.side=123,123  delta=3
> > outputs.master.mute=off  [ off on ]
> > outputs.master.boost=off  [ off on ]
>
> ..  you may try 'boost=on'
>
> > outputs.surround.mute=off  [ off on ]
> > outputs.surround.boost=off  [ off on ]
> > outputs.clfe.mute=off  [ off on ]
> > outputs.clfe.boost=off  [ off on ]
> > outputs.side.mute=off  [ off on ]
> > outputs.side.boost=off  [ off on ]
> > outputs.mic2.mute=off  [ off on ]
> > outputs.mic2.boost=off  [ off on ]
> > outputs.mic2.dir=output  [ input output ]
> > outputs.line1.mute=off  [ off on ]
> > outputs.line1.boost=off  [ off on ]
> > outputs.line1.dir=input  [ input output ]
>                          =output ?
>
> > outputs.line2.mute=off  [ off on ]
> > outputs.line2.boost=off  [ off on ]
> > outputs.line2.dir=output  [ input output ]
> > playback.mode=analog  [ analog spdif ]
> > record.mode=analog  [ analog spdif ]
> >
> > i'll have a look on your output to compare
>
> There doesn't seem to be a lot to compare, unfortunately. It has
> always looked for me that azalia is too clever for it's own good...
>
> >
> > raphael
> > On 5/20/07, Chavdar Ivanov <ci4ic4@gmail.com> wrote:
> > > On 20/05/07, fgh salle <pikapika@8-0.net> wrote:
> > > > hi
> > > > my intel 82801 audio card is correctly recognized by azalia driver but
> > > > i can't get no sound from the laptop sepaker nor earplugs
> > >
> > > It worked on my laptop since I got it (Oct 2006 vintage), but
> > > initially I could not get output to speakers, only to the earphones. I
> > > get:
> > >
> > > % dmesg | grep -i azalia
> > > azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
> > > azalia0: interrupting at ioapic0 pin 21 (irq 10)
> > > azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 1)
> > > azalia0: host: High Definition Audio rev. 1.0
> > > azalia0: codec[0]: Analog Devices AD1981HD (rev. 2.0)
> > > azalia0: codec[0]: High Definition Audio rev. 1.0
> > > azalia0: playback: max channels=2, encodings=1<PCM>
> > > azalia0: playback: PCM
> > > formats=e007f<24bit,20bit,16bit,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz,8kHz>
> > > azalia0: recording: max channels=2, encodings=1<PCM>
> > > azalia0: recording: PCM
> > > formats=6007f<20bit,16bit,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz,8kHz>
> > > azalia0: codec[1]: 0x11c1/0x3026 (rev. 7.0)
> > > azalia0: codec[1]: High Definition Audio rev. 1.0
> > > azalia0: codec[1]: No support for modem function groups
> > > azalia0: codec[1] has no audio function groups
> > > audio0 at azalia0: full duplex, independent
> > >
> > > You could compare your 'mixerctl -av' output with mine:
> > >
> > > outputs.spdif.source=os  [ os adc ]
> > > outputs.lineout.source=dac  [ dac mixerout ]
> > > outputs.lineout.mute=off  [ off on ]
> > > outputs.lineout=178,178  delta=4
> > > record.lineout=85,85  delta=85
> > > outputs.lineout.dir=output  [ input output ]
> > > outputs.lineout.boost=on  [ off on ]
> > > outputs.lineout.eapd=on  [ off on ]
>
> This turns off my speaker output
>
> > > outputs.headphones.src=dac  [ dac mixerout ]
> > > outputs.headphones.mute=off  [ off on ]
>
> And this - the headphones. (one minor gripe for me is that connecting
> headphones does not switch off the sound from the speakers, so I have
> to do it manually  - ..eapd=off. )
>
> > > outputs.headphones=198,198  delta=4
> > > outputs.headphones.boost=on  [ off on ]
> > > outputs.mono.mute=off  [ off on ]
> > > outputs.mono=117  delta=4
> > > record.mic=85,85  delta=85
> > > outputs.linein.source=dac  [ dac mixerout ]
> > > outputs.linein.mute=off  [ off on ]
> > > outputs.linein=85,85  delta=4
> > > record.linein=85,85  delta=85
> > > outputs.linein.dir=output  [ input output ]
> > > outputs.mono.source=dac  [ dac mixedmic linein mixerout lineout mic2 ]
> > > inputs.beep.source=digitalbeep  [ digitalbeep beep ]
> > > inputs.beep.mute=off  [ off on ]
> > > inputs.beep=119  delta=17
> > > inputs.dac.mute=off  [ off on ]
> > > inputs.dac=106,106  delta=8
> > > inputs.mic.mute=off  [ off on ]
> > > inputs.mic=115,115  delta=8
> > > inputs.linein.mute=off  [ off on ]
> > > inputs.linein=115,115  delta=8
> > > record.source=mixedmic  [ mixedmic linein mixerout mono cd lineout mic2 aux ]
> > > record.mute=off  [ off on ]
> > > record.master=119,119  delta=17
> > > outputs.mic2.source=dac  [ dac mixerout ]
> > > outputs.mic2.mute=off  [ off on ]
> > > outputs.mic2=85,85  delta=4
> > > record.mic2=85,85  delta=85
> > > outputs.mic2.dir=output  [ input output ]
> > > inputs.lineout.mute=off  [ off on ]
> > > inputs.lineout=115,115  delta=8
> > > inputs.aux.mute=off  [ off on ]
> > > inputs.aux=115,115  delta=8
> > > inputs.mic2.mute=off  [ off on ]
> > > inputs.mic2=115,115  delta=8
> > > inputs.cd.mute=off  [ off on ]
> > > inputs.cd=115,115  delta=8
> > > record.mixedmic.mute1=off  [ off on ]
> > > record.mixedmic.mute2=off  [ off on ]
> > > playback.mode=analog  [ analog spdif ]
> > >
> > > This is on -current (i386).
> > >
> > > > any tips would be welcome, thanks
> > > > raphael
> > > >
>
> Chavdar Ivanov
>