Subject: Re: Problem on Laptop ( HP.NC6120 )
To: Juan RP <juan@xtrarom.org>
From: KlinT <klint@klintcentral.net>
List: current-users
Date: 04/14/2007 22:27:35
Hi,
Yes, I'm sure of that ...
But I cannot provide any dmesg from NetBSD-Current right now ...
It seems to work with NetBSD 3.1 ...
So, here is the dmesg from GENERIC_LAPTOP / NetBSD 3.1 :
Thanks in advance ...
Arnaud.
------------------------------------------------------------------------=20=
------------------
66d (modem communications, revision 0x03) at pci0 dev 30 function 3 =20
not configured
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x2641 (rev. 0x03)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801FB IDE Controller (ICH6) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL-DF) has sockets A and B
pcic0: controller 1 (Intel 82365SL-DF) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcmcia2 at pcic0 controller 1 socket 0
pcmcia3 at pcic0 controller 1 socket 1
isapnp0: no ISA Plug 'n Play devices found
pcic0: controller 0 detecting irqs with mask 0xde18: none
pcic0: controller 1 detecting irqs with mask 0xde18: none
pcic0: no available irq; polling for socket events
Kernelized RAIDframe activated
md0: internal 5000 KB image area
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <HL-DT-STCD-RW/DVD DRIVE GCC-4244N, , 1.01> =20=
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
wd0 at atabus0 drive 0: <SAMSUNG HM120JC>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 =20
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) =20
(using DMA)
cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA)
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
warning: no /dev/console
syncing disks... done
unmounting file systems... done
rebooting...
NetBSD 3.1 (GENERIC_LAPTOP) #0: Tue Oct 31 04:32:05 UTC 2006
builds@b0.netbsd.org:/home/builds/ab/netbsd-3-1-RELEASE/=20
i386/200610302053Z-obj/home/builds/ab/netbsd-3-1-RELEASE/src/sys/arch/=20=
i386/compile/GENERIC_LAPTOP
total memory =3D 503 MB
avail memory =3D 486 MB
BIOS32 rev. 0 found at 0xf0000
PCI BIOS rev. 2.1 found at 0xf0322
pcibios: config mechanism [1][x], special cycles [x][x], last bus 16
PCI IRQ Routing Table rev. 1.0 found at 0xf07c0, size 176 bytes (9 =20
entries)
pcibios_pir_init: bad IRQ table checksum
PCI IRQ Routing Table rev. 1.0 found at 0xf5610, size 176 bytes (9 =20
entries)
PCI Interrupt Router at 000:31:0 (Intel product 0x2641 compatible)
PCI Exclusive IRQs: 5 10 11
pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0x8086 =20
product 0x2641
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:02:0 0x8086 0x2592 A 0x60 11 1 already assigned
000:28:0 0x8086 0x2660 A 0x60 11 1 already assigned
000:29:0 0x8086 0x2658 A 0x60 11 1 already assigned
000:29:1 0x8086 0x2659 B 0x61 10 1 already assigned
000:29:2 0x8086 0x265a C 0x62 10 1 already assigned
000:29:3 0x8086 0x265b D 0x63 10 1 already assigned
000:29:7 0x8086 0x265c A 0x60 11 1 already assigned
000:30:2 0x8086 0x266e A 0x60 11 1 already assigned
000:30:3 0x8086 0x266d B 0x61 10 1 already assigned
000:31:1 0x8086 0x266f A 0x60 11 1 already assigned
002:04:0 0x8086 0x4220 A 0x69 11 1 already assigned
002:06:0 0x104c 0x8031 A 0x62 10 1 already assigned
002:06:1 0x104c 0x8031 B 0x63 10 1 already assigned
002:06:2 0x104c 0x8032 C 0x6a 10 1 already assigned
002:06:3 0x104c 0x8033 D 0x68 10 1 already assigned
002:06:4 0x104c 0x8034 D 0x68 10 1 already assigned
002:06:5 0x104c 0x8035 A 0x62 10 1 already assigned
002:14:0 0x14e4 0x165e A 0x60 11 1 already assigned
------------------------------------------
PCI fixup examining 8086:2590
PCI fixup examining 8086:2592
PCI fixup examining 8086:2792
PCI fixup examining 8086:2660
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 8086:2658
PCI fixup examining 8086:2659
PCI fixup examining 8086:265a
PCI fixup examining 8086:265b
PCI fixup examining 8086:265c
PCI fixup examining 8086:2448
PCI fixup examining 8086:4220
PCI fixup examining 104c:8031
PCI bridge 2: primary 2, secondary 3, subordinate 3
PCI fixup examining 104c:8031
PCI bridge 3: primary 2, secondary 4, subordinate 4
PCI fixup examining 104c:8032
PCI fixup examining 104c:8033
PCI fixup examining 104c:8034
PCI fixup examining 104c:8035
PCI fixup examining 14e4:165e
PCI bridge 1: primary 0, secondary 2, subordinate 4
PCI fixup examining 8086:266e
PCI fixup examining 8086:266d
PCI fixup examining 8086:2641
PCI fixup examining 8086:266f
PCI bus #4 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x2590
[OK]
000:02:0 0x8086 0x2592
10h mem 0xd0100000 0x00080000
14h port 0x00002000 0x00000008
18h mem 0xc0000000 0x10000000
1ch mem 0xd0180000 0x00040000
[OK]
000:02:1 0x8086 0x2792
10h mem 0xd0200000 0x00080000
[OK]
000:28:0 0x8086 0x2660
[OK]
000:29:0 0x8086 0x2658
20h port 0x00002020 0x00000020
[OK]
000:29:1 0x8086 0x2659
20h port 0x00002040 0x00000020
[OK]
000:29:2 0x8086 0x265a
20h port 0x00002060 0x00000020
[OK]
000:29:3 0x8086 0x265b
20h port 0x00002080 0x00000020
[OK]
000:29:7 0x8086 0x265c
10h mem 0xd0280000 0x00000400
[OK]
000:30:0 0x8086 0x2448
[OK]
000:30:2 0x8086 0x266e
10h port 0x00002100 0x00000100
14h port 0x00002200 0x00000040
18h mem 0xd0281000 0x00000200
1ch mem 0xd0282000 0x00000100
[OK]
000:30:3 0x8086 0x266d
10h port 0x00002400 0x00000100
14h port 0x00002500 0x00000080
[OK]
000:31:0 0x8086 0x2641
[OK]
000:31:1 0x8086 0x266f
10h port 0x00000000 0x00000008
14h port 0x00000000 0x00000004
18h port 0x00000000 0x00000008
1ch port 0x00000000 0x00000004
20h port 0x00002580 0x00000010
[NG]
002:04:0 0x8086 0x4220
10h mem 0xd0000000 0x00001000
[OK]
002:06:0 0x104c 0x8031
10h mem 0xd0001000 0x00001000
[OK]
002:06:1 0x104c 0x8031
10h mem 0xd0002000 0x00001000
[OK]
002:06:2 0x104c 0x8032
10h mem 0xd0003000 0x00000800
14h mem 0xd0004000 0x00004000
[OK]
002:06:3 0x104c 0x8033
10h mem 0xd0008000 0x00002000
[OK]
002:06:4 0x104c 0x8034
10h mem 0xd000a000 0x00000100
14h mem 0xd000b000 0x00000100
18h mem 0xd000c000 0x00000100
[OK]
002:06:5 0x104c 0x8035
10h mem 0xd000d000 0x00001000
14h mem 0xd000e000 0x00001000
18h mem 0xd000f000 0x00001000
1ch mem 0xd0010000 0x00001000
[OK]
002:14:0 0x14e4 0x165e
10h mem 0xd0020000 0x00010000
[OK]
--------------------------[ 1 devices bogus]
Physical memory end: 0x1f7cc000
PCI memory mapped I/O space start: 0x1f800000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x2590
[OK]
000:02:0 0x8086 0x2592
10h mem 0xd0100000 0x00080000
14h port 0x00002000 0x00000008
18h mem 0xc0000000 0x10000000
1ch mem 0xd0180000 0x00040000
[OK]
000:02:1 0x8086 0x2792
10h mem 0xd0200000 0x00080000
[OK]
000:28:0 0x8086 0x2660
[OK]
000:29:0 0x8086 0x2658
20h port 0x00002020 0x00000020
[OK]
000:29:1 0x8086 0x2659
20h port 0x00002040 0x00000020
[OK]
000:29:2 0x8086 0x265a
20h port 0x00002060 0x00000020
[OK]
000:29:3 0x8086 0x265b
20h port 0x00002080 0x00000020
[OK]
000:29:7 0x8086 0x265c
10h mem 0xd0280000 0x00000400
[OK]
000:30:0 0x8086 0x2448
[OK]
000:30:2 0x8086 0x266e
10h port 0x00002100 0x00000100
14h port 0x00002200 0x00000040
18h mem 0xd0281000 0x00000200
1ch mem 0xd0282000 0x00000100
[OK]
000:30:3 0x8086 0x266d
10h port 0x00002400 0x00000100
14h port 0x00002500 0x00000080
[OK]
000:31:0 0x8086 0x2641
[OK]
000:31:1 0x8086 0x266f
10h port 0x00005800 0x00000008
14h port 0x00005808 0x00000004
18h port 0x00005810 0x00000008
1ch port 0x0000580c 0x00000004
20h port 0x00002580 0x00000010
[OK]
002:04:0 0x8086 0x4220
10h mem 0xd0000000 0x00001000
[OK]
002:06:0 0x104c 0x8031
10h mem 0xd0001000 0x00001000
[OK]
002:06:1 0x104c 0x8031
10h mem 0xd0002000 0x00001000
[OK]
002:06:2 0x104c 0x8032
10h mem 0xd0003000 0x00000800
14h mem 0xd0004000 0x00004000
[OK]
002:06:3 0x104c 0x8033
10h mem 0xd0008000 0x00002000
[OK]
002:06:4 0x104c 0x8034
10h mem 0xd000a000 0x00000100
14h mem 0xd000b000 0x00000100
18h mem 0xd000c000 0x00000100
[OK]
002:06:5 0x104c 0x8035
10h mem 0xd000d000 0x00001000
14h mem 0xd000e000 0x00001000
18h mem 0xd000f000 0x00001000
1ch mem 0xd0010000 0x00001000
[OK]
002:14:0 0x14e4 0x165e
10h mem 0xd0020000 0x00010000
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Dothan) (686-class), 1729.15 MHz, id 0x6d8
cpu0: features =20
afe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features afe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9fbff<FXSR,SSE,SSE2,SS,TM,SBF>
cpu0: features2 180<EST,TM2>
cpu0: "Intel(R) Pentium(R) M processor 1.73GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: using thermal monitor 2
cpu0: Enhanced SpeedStep (1308 mV) - unknown CPU or operating point.
cpu0: 64 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82915PM/GM/GMS,82910GML Host Bridge (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xc0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: Intel 82915GM/GMS Integrated Graphics =20
Device (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Intel 82915GM/GMS IGD Companion (miscellaneous display, revision =20
0x03) at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0: Intel 82801FB/FR PCI Express Port #0 =20
(rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: Intel 82801FB/FR USB UHCI Controller =20=
(rev. 0x03)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801FB/FR USB UHCI Controller =20=
(rev. 0x03)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801FB/FR USB UHCI Controller =20=
(rev. 0x03)
uhci2: interrupting at irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801FB/FR USB UHCI Controller =20=
(rev. 0x03)
uhci3: interrupting at irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801FB/FR USB EHCI Controller =20=
(rev. 0x03)
ehci0: interrupting at irq 11
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. =20
0xd3)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
iwi0 at pci2 dev 4 function 0: Intel PRO/Wireless LAN 2200BG Mini-PCI =20=
Adapter (rev. 0x05)
iwi0: interrupting at irq 11
iwi0: 802.11 address 00:12:f0:9f:ca:e3
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps =20=
24Mbps 36Mbps 48Mbps 54Mbps
cbb0 at pci2 dev 6 function 0: Texas Instruments product 0x8031 (rev. =20=
0x00)
cbb1 at pci2 dev 6 function 1: Texas Instruments product 0x8031 (rev. =20=
0x00)
Texas Instruments product 0x8032 (Firewire serial bus, interface =20
0x10) at pci2 dev 6 function 2 not configured
Texas Instruments product 0x8033 (miscellaneous mass storage) at pci2 =20=
dev 6 function 3 not configured
Texas Instruments product 0x8034 (system subclass 0x05) at pci2 dev 6 =20=
function 4 not configured
Texas Instruments product 0x8035 (miscellaneous communications) at =20
pci2 dev 6 function 5 not configured
bge0 at pci2 dev 14 function 0: Broadcom BCM5705 Gigabit Ethernet
bge0: interrupting at irq 11
bge0: ASIC BCM5705 A3 (0x3003), Ethernet address 00:14:38:0e:1a:00
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5705 1000BASE-T media interface, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, =20
1000baseT-FDX, auto
cbb0: interrupting at irq 10
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 10
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0
pcmcia1 at cardslot1
auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no =20=
3D stereo
auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
Intel 82801FB/FR AC'97 Modem Controller (modem communications, =20
revision 0x03) at pci0 dev 30 function 3 not configured
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x2641 (rev. 0x03)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801FB IDE Controller (ICH6) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Palm detect, Multi-finger
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
auich0: measured ac97 link rate at 48005 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <HL-DT-STCD-RW/DVD DRIVE GCC-4244N, , 1.01> =20=
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
wd0 at atabus0 drive 0: <SAMSUNG HM120JC>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 =20
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) =20
(using DMA)
cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
dma read modebits: 0x 203fe
dma read modebits: 0x 203fe
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, =20
iclass 3/1
ums0 at uhidev0: 4 buttons and Z dir.
wsmouse1 at ums0 mux 0
Le 14 avr. 07 =E0 22:23, Juan RP a =E9crit :
> On Sat, 14 Apr 2007 20:28:35 +0200
> KlinT <klint@klintcentral.net> wrote:
>
>> Hi All,
>>
>> Well, I'm trying to run NetBSD-Current ( 4.99.17 - Compiled on April,
>> 14 arround midnight ) on my laptop ...
>> It's a HP NC6120 ...
>>
>> The installation run fine but I experience some problem when booting
>> GENERIC_LAPTOP ...
>>
>> Sometimes, juste after installation I'm able to login,
>> Other times, it hangs randomly during the boot process,
>> And finally, on the case I'm able to login, I "lost" the keyboard
>> after 1 or 2 minutes ...
>>
>> I'm not able to post any logs right now sorry ...
>>
>> Any ideas ?
>
> Perhaps if you specify hardware details and dmesg output of a working
> kernel, will be easier to know.
>
> --=20
> http://plog.xtrarom.org/
> Juan RP's blog - NetBSD/pkgsrc news in Spanish
>