Hello

This server works very fine but I dont know if the
count of 8 CPUs and some "not configured" devices
can be a potential problem in thr future. (dmesg is
at end of this message). Also, I dont know if the
count of buses (and the order) is right.

This server is a Lanix (mexican brand) but in US is
exactly a supermicro server. The mobo is a X6DH8-G2
and have just two CPUs.
http://www.supermicro.com/products/motherboard/Xeon800/E7520/X6DH8-G2.cfm

I will have here this server for 10 days. then will
arrive the ours (mobo X6DH8-G2+ double core and just
one CPU each server). I have preoccupation because
I dont know if it is really a problem.

I will apreciate the comments and tips you can give me.

Thanks in advance

Heron Gallegos
Saltillo Coahuila Mexico

venera> uname -a
NetBSD venera 3.0.1 NetBSD 3.0.1 (GENERIC.MP) #0: Thu Jul 13 20:29:01 UTC 2006  riz@b2.netbsd.org:/home/builds/ab/netbsd-3-0-1-RELEASE/amd64/200607131826Z-obj/home/builds/ab/netbsd-3-0-1-RELEASE/src/sys/arch/amd64/compile/GENERIC.MP amd64

venera> dmesg
NetBSD 3.0.1 (GENERIC.MP) #0: Thu Jul 13 20:29:01 UTC 2006
	riz@b2.netbsd.org:/home/builds/ab/netbsd-3-0-1-RELEASE/amd64/200607131826Z-obj/home/builds/ab/netbsd-3-0-1-RELEASE/src/sys/arch/amd64/compile/GENERIC.MP
total memory = 4095 MB
avail memory = 3921 MB
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (INTEL    Lindenhurst )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0:                   Intel(R) Xeon(TM) CPU 2.80GHz, 2800.18 MHz
cpu0: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,B21,MMXX,MMX>
cpu0: features: bffbfbff<FXSR,SSE,SSE2,B27,B28,LONG,3DNOW>
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 64 page colors
cpu1 at mainbus0: apid 4 (application processor)
cpu1: starting
cpu1:                   Intel(R) Xeon(TM) CPU 2.80GHz, 2800.11 MHz
cpu1: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,B21,MMXX,MMX>
cpu1: features: bffbfbff<FXSR,SSE,SSE2,B27,B28,LONG,3DNOW>
cpu1: L2 cache 2 MB 64B/line 8-way
cpu2 at mainbus0: apid 1 (application processor)
cpu2: starting
cpu2:                   Intel(R) Xeon(TM) CPU 2.80GHz, 2800.11 MHz
cpu2: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu2: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,B21,MMXX,MMX>
cpu2: features: bffbfbff<FXSR,SSE,SSE2,B27,B28,LONG,3DNOW>
cpu2: L2 cache 2 MB 64B/line 8-way
cpu3 at mainbus0: apid 5 (application processor)
cpu3: starting
cpu3:                   Intel(R) Xeon(TM) CPU 2.80GHz, 2800.11 MHz
cpu3: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu3: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,B21,MMXX,MMX>
cpu3: features: bffbfbff<FXSR,SSE,SSE2,B27,B28,LONG,3DNOW>
cpu3: L2 cache 2 MB 64B/line 8-way
cpu4 at mainbus0: apid 2 (application processor)
cpu4: starting
cpu4:                   Intel(R) Xeon(TM) CPU 2.80GHz, 2800.11 MHz
cpu4: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu4: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,B21,MMXX,MMX>
cpu4: features: bffbfbff<FXSR,SSE,SSE2,B27,B28,LONG,3DNOW>
cpu4: L2 cache 2 MB 64B/line 8-way
cpu5 at mainbus0: apid 6 (application processor)
cpu5: starting
cpu5:                   Intel(R) Xeon(TM) CPU 2.80GHz, 2800.11 MHz
cpu5: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu5: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,B21,MMXX,MMX>
cpu5: features: bffbfbff<FXSR,SSE,SSE2,B27,B28,LONG,3DNOW>
cpu5: L2 cache 2 MB 64B/line 8-way
cpu6 at mainbus0: apid 3 (application processor)
cpu6: starting
cpu6:                   Intel(R) Xeon(TM) CPU 2.80GHz, 2800.11 MHz
cpu6: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu6: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,B21,MMXX,MMX>
cpu6: features: bffbfbff<FXSR,SSE,SSE2,B27,B28,LONG,3DNOW>
cpu6: L2 cache 2 MB 64B/line 8-way
cpu7 at mainbus0: apid 7 (application processor)
cpu7: starting
cpu7:                   Intel(R) Xeon(TM) CPU 2.80GHz, 2800.12 MHz
cpu7: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu7: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,B21,MMXX,MMX>
cpu7: features: bffbfbff<FXSR,SSE,SSE2,B27,B28,LONG,3DNOW>
cpu7: L2 cache 2 MB 64B/line 8-way
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 7 is type PCI
mpbios: bus 8 is type ISA
ioapic0 at mainbus0 apid 8 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 9 (I/O APIC)
ioapic1: pa 0xfec81000, version 20, 24 pins
ioapic2 at mainbus0 apid 10 (I/O APIC)
ioapic2: pa 0xfec81400, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x3590 (rev. 0x0c)
Intel product 0x3591 (undefined subclass 0x00, revision 0x0c) at pci0 dev 0 function 1 not configured
Intel product 0x3594 (miscellaneous system, revision 0x0c) at pci0 dev 1 function 0 not configured
ppb0 at pci0 dev 2 function 0: Intel product 0x3595 (rev. 0x0c)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 3 function 0: Intel product 0x3596 (rev. 0x0c)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: Intel product 0x0329 (rev. 0x09)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ahd0 at pci3 dev 2 function 0
ahd0: Enabling 39Bit Addressing
ahd0: interrupting at ioapic1 pin 8 (irq 5)
ahd0: aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
scsibus0 at ahd0: 16 targets, 8 luns per target
ahd1 at pci3 dev 2 function 1
ahd1: Enabling 39Bit Addressing
ahd1: interrupting at ioapic1 pin 9 (irq 10)
ahd1: aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
scsibus1 at ahd1: 16 targets, 8 luns per target
Intel product 0x0326 (interrupt system, interface 0x20, revision 0x09) at pci2 dev 0 function 1 not configured
ppb3 at pci2 dev 0 function 2: Intel product 0x032a (rev. 0x09)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci4 dev 2 function 0: Intel i82546GB 1000BASE-T Ethernet, rev. 3
wm0: interrupting at ioapic2 pin 6 (irq 10)
wm0: 64-bit 133MHz PCIX bus
wm0: 256 word (8 address bits) MicroWire EEPROM
wm0: Ethernet address 00:30:48:2f:b0:72
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm1 at pci4 dev 2 function 1: Intel i82546GB 1000BASE-T Ethernet, rev. 3
wm1: interrupting at ioapic2 pin 7 (irq 11)
wm1: 64-bit 133MHz PCIX bus
wm1: 256 word (8 address bits) MicroWire EEPROM
wm1: Ethernet address 00:30:48:2f:b0:73
makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Intel product 0x0327 (interrupt system, interface 0x20, revision 0x09) at pci2 dev 0 function 3 not configured
ppb4 at pci0 dev 4 function 0: Intel product 0x3597 (rev. 0x0c)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 6 function 0: Intel product 0x3599 (rev. 0x0c)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: Intel 82801EB/ER USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 5)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801EB/ER USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801EB/ER USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18 (irq 10)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801EB/ER USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16 (irq 5)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
Intel 82801EB/ER USB EHCI Controller (USB serial bus, interface 0x20, revision 0x02) at pci0 dev 29 function 7 not configured
ppb6 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xc2)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled
vga0 at pci7 dev 1 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801EB LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
Intel 82801EB/ER SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
ioapic0: enabling
ioapic1: enabling
ioapic2: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <LITE-ON CD-ROM LTN-5291S, , NS08> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
sd0 at scsibus0 target 0 lun 0: <FUJITSU, MAW3073NC, 0104> disk fixed
sd0: 70136 MB, 78753 cyl, 2 head, 911 sec, 512 bytes/sect x 143638992 sectors
sd0: sync (6.25ns offset 127), 16-bit (320.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <FUJITSU, MAT3073NC, 0108> disk fixed
sd1: 70136 MB, 78753 cyl, 2 head, 911 sec, 512 bytes/sect x 143638992 sectors
sd1: sync (6.25ns offset 127), 16-bit (320.000MB/s) transfers, tagged queueing
ses0 at scsibus0 target 8 lun 0: <SUPER, GEM359 REV001, 1.09> processor fixed
ses0: SAF-TE Compliant Device
ses0: async, 8-bit transfers
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
cpu2: CPU 1 running
cpu4: CPU 2 running
cpu6: CPU 3 running
cpu1: CPU 4 running
cpu3: CPU 5 running
cpu5: CPU 6 running
cpu7: CPU 7 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)