Subject: trouble booting NET4501; anyone else?
To: None <current-users@netbsd.org>
From: None <dyoung@pobox.com>
List: current-users
Date: 06/27/2006 16:03:49
--UK1lfQXsnwKrySH9
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Disposition: inline
I am using the attached kernel configuration, derived from
sys/arch/i386/conf/NET4501, to boot a Soekris net4526. The system reboots
after wdc0 attaches, as you can see below. It didn't used to do that!
I am using kernel sources from yesterday, and GCC4.
Does anyone else see this? Have a solution?
Ordinarily, the boot progress following wdc0 attachment is like this:
atabus0 at wdc0 channel 0
npx0 at isa0 port 0xf0-0xff
npx0: using exception 16
cmos: attached.
wd0 at atabus0 drive 0: <064MB ATA Flash Disk>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 62528 KB, 977 cyl, 4 head, 32 sec, 512 bytes/sect x 125056 sectors
wd0: drive supports PIO mode 4
boot device: wd0
root on wd0e dumps on wd0b
mountroot: trying ffs...
root file system type: ffs
warning: no /dev/console
init: copying out path `/sbin/init' 11
***
comBIOS ver. 1.28 20050527 Copyright (C) 2000-2005 Soekris Engineering.
net45xx
0064 Mbyte Memory CPU 80486 133 Mhz
Pri Mas 64MB ATA Flash Disk LBA 977-4-32 62 Mbyte
Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int
-------------------------------------------------------------------
0:00:0 1022 3000 06000000 0006 2280 00 00 00 00000000 00000000
0:16:0 168C 0013 02000001 0116 0290 10 3C 00 A0000000 00000000 10
0:18:0 100B 0020 02000000 0107 0290 00 3F 00 0000E001 A0010000 11
5 Seconds to automatic boot. Press Ctrl-P for entering Monitor.
NetBSD MBR boot
NetBSD/i386 ffsv1 Primary Bootstrap
0:-(
>> NetBSD/i386 BIOS Boot, Revision 3.3
>> (dyoung@cuw.ojctech.com, Tue Jun 27 03:17:30 CDT 2006)
>> Memory: 639/64512 k
Press return to boot now, any other key for boot menu
booting hd0a:netbsd - starting in 0
1900500+58400+100952 [141632+134133]=0x23b6e4
Loaded initial symtab at 0xc02f7e58, strtab at 0xc031aaec, # entries 8836
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 3.99.21 (cuw_45x1) #0: Tue Jun 27 12:59:19 CDT 2006
dyoung@cuw.ojctech.com:/u4/dyoung-scratch/scratch-new/i386/O/sys/arch/i386/compile/cuw_45x1
total memory = 65148 KB
avail memory = 61524 KB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1189200 Hz quality 100
timecounter: selected timecounter "i8254" frequency 1189200 Hz quality 100
BIOS32 rev. 0 found at 0xf7840
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Am486DX4 W/B or Am5x86 W/B 150 (486-class), id 0x494
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
elansc0 at pci0 dev 0 function 0: AMD Elan SC520 System Controller
elansc0: product 0 stepping 1.1, CPU clock 133MHz
gpio0 at elansc0: 32 pins
ath0 at pci0 dev 16 function 0
ath0: interrupting at irq 10
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 5.9 phy 4.3 radio 3.6
sip0 at pci0 dev 18 function 0: NatSemi DP83815 10/100 Ethernet, rev 00
sip0: interrupting at irq 11
sip0: Ethernet address 00:00:24:c6:7b:50
nsphyter0 at sip0 phy 0: DP83815 10/100 media interface, rev. 1
nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
POST: 0123456789bcefghipajklnopq,,,tvwxy
Dave
--
David Young On the Job Consulting
dyoung@onthejob.net Urbana, IL * (217) 278-3933
--UK1lfQXsnwKrySH9
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=cuw_45x1
# $NetBSD: NET4501,v 1.34 2005/06/21 08:19:26 sekiya Exp $
# $NetBSD: NET4501,v 1.48 2006/04/07 18:55:22 riz Exp $
#
# NET4501 -- kernel configuration for a Soekris Engineering net4501
# single-board computer.
#
# http://www.soekris.com/
#
include "arch/i386/conf/std.i386"
#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
#ident "NET4501-$Revision: 1.48 $"
maxusers 8 # estimated number of users
# CPU support. At least one is REQUIRED.
#options I386_CPU
options I486_CPU
#options I586_CPU
#options I686_CPU
# AMD Elan SC520's timer runs at a different frequency
options TIMER_FREQ=1189200
makeoptions COPTS="-Os -march=i486"
options VNODE_OP_NOINLINE # conserve memory
options MALLOC_NOINLINE # conserve memory
# CPU-related options.
#options MATH_EMULATE # floating point emulation
#options VM86 # virtual 8086 emulation
#options USER_LDT # user-settable LDT; used by WINE
#options MTRR # memory-type range register syscall support
#options PERFCTRS # performance-monitoring counters support
# delay between "rebooting ..." message and hardware reset, in milliseconds
#options CPURESET_DELAY=2000
# This option allows you to force a serial console at the specified
# I/O address. see console(4) for details.
#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
# you don't want the option below ON iff you are using the
# serial console option of the new boot strap code.
#options CONS_OVERRIDE # Always use above! independent of boot info
# The following options override the memory sizes passed in from the boot
# block. Use them *only* if the boot block is unable to determine the correct
# values. Note that the BIOS may *correctly* report less than 640k of base
# memory if the extended BIOS data area is located at the top of base memory
# (as is the case on most recent systems).
#options REALBASEMEM=639 # size of base memory (in KB)
#options REALEXTMEM=15360 # size of extended memory (in KB)
#options REALEXTMEM=31744 # size of extended memory (in KB)
# Standard system options
options INSECURE # disable kernel security levels
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
options NTP # NTP phase/frequency locked loop
options KTRACE # system call tracing via ktrace(1)
#options SYSVMSG # System V-like message queues
#options SYSVSEM # System V-like semaphores
#options SEMMNI=10 # number of semaphore identifiers
#options SEMMNS=60 # number of semaphores in system
#options SEMUME=10 # max number of undo entries per process
#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V-like memory sharing
#options SHMMAXPGS=2048 # 2048 pages is the default
#options LKM # loadable kernel modules
#options USERCONF # userconf(4) support
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
# Diagnostic/debugging support options
#options DIAGNOSTIC # expensive kernel consistency checks
options DEBUG # expensive debugging checks/support
#options KMEMSTATS # kernel memory statistics (vmstat -m)
options DDB # in-kernel debugger
#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
#options KGDB # remote debugger
#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
makeoptions DEBUG="-g" # compile full symbol table
#options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
# File systems
file-system FFS # UFS
#file-system EXT2FS # second extended file system (linux)
#file-system LFS # log-structured file system
#file-system MFS # memory file system
#file-system NFS # Network File System client
#file-system NTFS # Windows/NT file system (experimental)
#file-system CD9660 # ISO 9660 + Rock Ridge file system
#file-system MSDOSFS # MS-DOS file system
#tiny#file-system FDESC # /dev/fd
#file-system KERNFS # /kern
file-system NULLFS # loopback file system
#file-system OVERLAY # overlay file system
#file-system PORTAL # portal filesystem (still experimental)
#tiny#file-system PROCFS # /proc
#file-system UMAPFS # NULLFS + uid and gid remapping
#file-system UNION # union file system
#file-system CODA # Coda File System; also needs vcoda (below)
file-system PTYFS # /dev/pts/N support
file-system TMPFS # experimental - Efficient memory file-system
# File system options
#options QUOTA # UFS quotas
#options FFS_EI # FFS Endian Independent support
#options SOFTDEP # FFS soft updates support.
#options FFS_NO_SNAPSHOT # No FFS snapshot support
#options NFSSERVER # Network File System server
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
# Networking options
options GATEWAY # packet forwarding
options INET # IP + ICMP + TCP + UDP
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
#options IPSEC_DEBUG # debug for IP security
#options MROUTING # IP multicast routing
#options PIM # Protocol Independent Multicast
#options NS # XNS
#options NSIP # XNS tunneling over IP
#options ISO,TPIP # OSI
#options EON # OSI tunneling over IP
#options CCITT,LLC,HDLC # X.25
#options NETATALK # AppleTalk networking protocols
#options PPP_BSDCOMP # BSD-Compress compression support for PPP
#options PPP_DEFLATE # Deflate compression support for PPP
#options PPP_FILTER # Active filter support for PPP (requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
#options IPFILTER_LOG # ipmon(8) log support
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
#options MIIVERBOSE # verbose PHY autoconfig messages
#options PCIVERBOSE # verbose PCI device autoconfig messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
# Kernel root file system and dump configuration.
config netbsd root on ? type ?
#config netbsd root on sd0a type ffs
#config netbsd root on ? type nfs
#
# Device configuration
#
mainbus0 at root
cpu0 at mainbus0
# Basic Bus Support
# PCI bus support
pci* at mainbus? bus ?
# Configure PCI using BIOS information
#options PCIBIOS # PCI BIOS support
#options PCIBIOSVERBOSE # PCI BIOS verbose info
#options PCI_ADDR_FIXUP # fixup PCI I/O addresses
#options PCI_BUS_FIXUP # fixup PCI bus numbering
#options PCI_INTR_FIXUP # fixup PCI interrupt routing
#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
#options PCIBIOS_INTR_GUESS # see pcibios(4)
#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup
# PCI bridges
elansc* at pci? dev ? function ? # Elan SC520 System Controller
gpio* at elansc?
#gpioow* at gpio? offset 6 mask 0x1 # 1-wire bus bitbanging via gpio
#onewire* at gpioow?
# 1-Wire devices
#owtemp* at onewire? # Temperature sensors
# ISA bus support
isa0 at mainbus?
# CardBus bridge support
cbb* at pci? dev ? function ?
cardslot* at cbb?
# CardBus bus support
cardbus* at cardslot?
pcmcia* at cardslot?
# Cardbus NICs
ath* at cardbus? function ? # Atheros 5210/5211/5212 802.11
atw* at cardbus? function ? # ADMtek ADM8211 (802.11)
ral* at cardbus? function ? # Ralink RT2x60 (802.11)
rtw* at cardbus? function ? # Realtek RTL8180 (802.11)
# Coprocessor Support
# Math Coprocessor support
npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
# ISA serial interfaces
com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
com1 at isa? port 0x2f8 irq 3
# IDE and related devices
# ATA (IDE) bus support
atabus* at ata?
# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
wdc0 at isa? port 0x1f0 irq 14 flags 0x00
# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd* at atabus? drive ? flags 0x0000
# Network Interfaces
# PCI network interfaces
ath* at pci? dev ? function ? # Atheros 5210/5211/5212 802.11
hifn* at pci? dev ? function ? # Hifn 7755/7811/795x
#ipw* at pci? dev ? function ? # Intel PRO/Wireless 2100
#iwi* at pci? dev ? function ? # Intel PRO/Wireless 2200BG
sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet
wi* at pci? dev ? function ? # Intersil Prism Mini-PCI (802.11b)
# PCMCIA network interfaces
wi* at pcmcia? function ? # Lucent/Intersil WaveLan IEEE (802.11)
awi* at pcmcia? function ?
# MII/PHY support
nsphyter* at mii? phy ? # NS83843 PHYs
# Pseudo-Devices
pseudo-device crypto # opencrypto framework
# network pseudo-devices
pseudo-device bpfilter # Berkeley packet filter
#pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop # network loopback
#pseudo-device ppp # Point-to-Point Protocol
#pseudo-device pppoe # PPP over Ethernet (RFC 2516)
#pseudo-device sl # Serial Line IP
#pseudo-device strip # Starmode Radio IP (Metricom)
#pseudo-device tun # network tunneling over tty
#pseudo-device tap # virtual Ethernet
pseudo-device gre # generic L3 over IP tunnel
#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith # IPv[46] tcp relay translation i/f
pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
#pseudo-device vlan # IEEE 802.1q encapsulation
pseudo-device bridge # simple inter-network bridging
pseudo-device pf # PF packet filter
pseudo-device pflog # PF log if
# miscellaneous pseudo-devices
pseudo-device pty # pseudo-terminals
# rnd works; RND_COM does not on port i386 yet.
pseudo-device rnd # /dev/random and in-kernel generator
#options RND_COM # use "com" randomness as well (BROKEN)
pseudo-device clockctl # user control of clock subsystem
#pseudo-device fss 4 # file system snapshot device
# Let's get small!
#no options PFIL_HOOKS
# debug options for wireless
options ATW_DEBUG
options DIAGNOSTIC
options RTW_DEBUG
options RAL_DEBUG
options WI_DEBUG
options WI_RING_DEBUG
# debug options for Cardbus
options CBB_DEBUG
# Turn on RADIX_MPATH for CUWiN images.
#options RADIX_MPATH
# debug options for routing
options GETIFA_DEBUG
options IEEE80211_DEBUG_REFCNT
#options IFAREF_DEBUG
options IPSELSRC
#options RN_DEBUG
bios0 at isa?
pseudo-device cmos
#
# Change these either by booting with -d and writing db_onpanic,
# db_fromconsole, or else by writing the sysctls ddb.onpanic,
# ddb.fromconsole.
#
options DDB_ONPANIC=0
options DDB_FROMCONSOLE=0
--UK1lfQXsnwKrySH9--