I have a build of current (i386 as of two days ago) on an old Gateway
Celeron box that sets up my Intel NIC, but not the Realtek one. Nor does it
configure the Ensoniq sound chip. 

I shouldn't really make this a "current" issue because 3.0 stable displayed
the same behaviour before I moved to current.

A search of the list archives suggested that perhaps some of the pci-related
kernel Options need to be turned on, but I am at a loss to know which ones.

Any guidance would be greatly appreciated. dmesg starts below:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.20 (GENERIC) #0: Wed May 31 23:12:46 EDT 2006
	root@nbsdboy.legomenon.org:/usr/obj/sys/arch/i386/compile/GENERIC
total memory = 255 MB
avail memory = 242 MB
BIOS32 rev. 0 found at 0xfd7b0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Celeron (Mendocino) (686-class), 365.04 MHz, id 0x660
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 128 KB 32B/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443LX PCI AGP Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443LX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies 3D Rage Pro (AGP) (rev. 0x5c)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x02)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: Intel 82371AB (PIIX4) USB Host Controller (rev. 0x01)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 7 function 3: SMI
iic0 at piixpm0: I2C bus
eap0 at pci0 dev 12 function 0: Ensoniq AudioPCI 97 (rev. 0x02)
eap0: can't map i/o space
fxp0 at pci0 dev 13 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:90:27:94:da:e3
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rtk0 at pci0 dev 14 function 0: Accton MPX 5030/5038 10/100BaseTX
rtk0: can't map i/o space
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <QUANTUM FIREBALL EX6.4A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 6149 MB, 13328 cyl, 15 head, 63 sec, 512 bytes/sect x 12594960 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <GCR-8521B, , 1.00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
wd1 at atabus1 drive 1: <FUJITSU MPE3084AE>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 8063 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 16514064 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA)
wd1(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)


Best regards,

-- 
Bob Bernstein