Subject: Re: SPIC stopped working
To: <>
From: Ed Gould <ed@left.wing.org>
List: current-users
Date: 02/24/2006 21:10:35
This is a multipart MIME message.
--==_Exmh_-1490221040
Content-Type: text/plain; charset=us-ascii
> No, I don't have that one, just spic. Do I need it now, to get spic?
> I don't see a wsmouse attachment for sony, and that's all I really care
> about. But I guess LCD brightness control would be good, too.
>
> I'll add it and see what happens.
I added sony* and the spic works, but there are lots of other problems.
The dmesg for the two kernels, and the diff between them (with
unimportant differences removed) are attached.
--Ed
--==_Exmh_-1490221040
Content-Type: text/plain ; name="dmesg1"; charset=us-ascii
Content-Description: dmesg1
Content-Disposition: attachment; filename="dmesg1"
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 3.99.15 (CALLEBAUT) #49: Mon Jan 2 18:14:09 PST 2006
ed@callebaut.wing.org:/usr/src/arch/i386/obj/current/src/sys/arch/i386/compile/CALLEBAUT
total memory = 511 MB
avail memory = 495 MB
BIOS32 rev. 0 found at 0xfd890
PCI BIOS rev. 2.1 found at 0xfd9ca
pcibios: config mechanism [1][x], special cycles [x][x], last bus 2
PCI IRQ Routing Table rev. 1.0 found at 0xfdf50, size 144 bytes (7 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371FB (PIIX) PCI-ISA Bridge compatible)
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:29:0 0x8086 0x2482 A 0x00 9 0 already assigned
000:29:1 0x8086 0x2484 B 0x03 9 0 already assigned
002:05:0 0x1180 0x0476 A 0x05 3 0 already assigned
002:08:0 0x8086 0x1031 A 0x04 9 0 already assigned
------------------------------------------
mainbus0 (root)
pci_addr_fixup: 002:05:0 0x1180 0x0476 new address 0x20000000
pci_addr_fixup: 002:05:1 0x1180 0x0476 new address 0x20001000
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Mobile Pentium 4 (686-class), 1988.64 MHz, id 0xf27
cpu0: features bfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features bfebf9ff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebf9ff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 400<CID>
cpu0: "Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz"
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 128 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: 16 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20050408
acpi0: X/RSDT: OemId < SONY, B0,20020801>, AslId <PTL ,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixing up intr link \_SB_.LNKB
acpi0: fixing up intr link \_SB_.LNKC
acpi0: fixing up intr link \_SB_.LNKH
acpi0: fixing up intr link \_SB_.LNKF
acpi0: fixing up intr link \_SB_.LNKG
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpi: activated SNY6001
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: using exception 16
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (SNY9003): aux port
pckbc2: irq 12
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpibat1 at acpi0 (PNP0C0A-2): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
com0 at acpi0 (PNP0501)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
lpt0 at acpi0 (PNP0401)
lpt0: io 0x378-0x37f,0x778-0x77f irq 7 drq 3
spic0 at acpi0 (SNY6001): Sony Programmable I/O Controller
spic0: installing sysctl hooks...
spic0: io 0x1080-0x109f irq 11
wsmouse0 at spic0 mux 0
spic1 at acpi0 (SNY5001): Sony Programmable I/O Controller
spic1: ACPI: unable to get _CRS resources: AE_NOT_FOUND
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: passive cooling mode only
acpitz0: critical 89.9C passive 25.9C
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 5.9
pms0: Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse1 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82845 Host (rev. 0x04)
pchb0: random number generator enabled
agp0 at pchb0: aperture at 0xec000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82845 AGP (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M7 LW (AGP) (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801CA USB Controller (rev. 0x02)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801CA USB Controller (rev. 0x02)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801CA USB Controller (rev. 0x02)
uhci2: interrupting at irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x42)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 5 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0xa8)
cbb0: using ioapic for interrupt
cbb1 at pci2 dev 5 function 1: Ricoh 5C476 PCI-CardBus bridge (rev. 0xa8)
cbb1: using ioapic for interrupt
fwohci0 at pci2 dev 5 function 2: Ricoh 5C552 PCI-CardBus bridge/Firewire (rev. 0x00)
fwohci0: interrupting at irq 9
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 08:00:46:03:01:47:2a:31
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
^TXXM-@ at ieee1394if0 not configured
fwohci0: Initiate bus reset
fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 66
fxp0: interrupting at irq 9
fxp0: Ethernet address 08:00:46:7a:15:89
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: interrupting at irq 9
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
cbb1: interrupting at irq 9
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4
pcmcia1 at cardslot1
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801CAM LPC Interface (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801CA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: interrupting at irq 9
auich0: ac97: Yamaha YMF753-S codec; 18 bit DAC, no 3D stereo
auich0: ac97: ext id 604<AC97_22,AMAP,SPDIF>
auich1 at pci0 dev 31 function 6: i82801CA (ICH3) AC-97 Modem
auich1: interrupting at irq 9
auich1: ac97: Conexant HSD11246 codec; no 3D stereo
auich1: ac97: ext mid 4009<CID1,LINE1>, secondary codec
auich1: codec not responding, status=0xff00
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
WARNING: Callback scheduled before sysmon task queue thread present.
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
audio0 at auich0: full duplex, independent
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
wi0 at pcmcia0 function 0: <Lucent Technologies, WaveLAN/IEEE, Version 01.01, >
wi0: 802.11 address 00:02:2d:4f:c5:13
wi0: using Sony WaveLAN/IEEE
wi0: Lucent Firmware: Station (6.16.1)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
umass0 at uhub2 port 1 configuration 1 interface 0
umass0: Sony USB Memory Stick Slot, rev 1.10/1.09, addr 2
umass0: using ATAPI over CBI with CCI
atapibus0 at umass0: 2 targets
sd0 at atapibus0 drive 0: <Sony, MSC-U03, 1.00> disk removable
sd0: drive offline
wd0 at atabus0 drive 0: <HITACHI_DK23EA-60>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus1 at atabus1: 2 targets
cd0 at atapibus1 drive 0: <TOSHIBA DVD-ROM SD-R6012, , 1S31> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
sd0(umass0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd0(umass0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd0(umass0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
boot device: wd0
root on wd0a dumps on wd0b
wi0: link state changed to UP
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
--==_Exmh_-1490221040
Content-Type: text/plain ; name="dmesg2"; charset=us-ascii
Content-Description: dmesg2
Content-Disposition: attachment; filename="dmesg2"
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 3.99.15 (CALLEBAUT) #56: Sat Feb 25 01:50:42 PST 2006
ed@callebaut.wing.org:/nusr/src/arch/i386/obj/current/src/sys/arch/i386/compile/CALLEBAUT
total memory = 511 MB
avail memory = 495 MB
BIOS32 rev. 0 found at 0xfd890
PCI BIOS rev. 2.1 found at 0xfd9ca
pcibios: config mechanism [1][x], special cycles [x][x], last bus 2
PCI IRQ Routing Table rev. 1.0 found at 0xfdf50, size 144 bytes (7 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371FB (PIIX) PCI-ISA Bridge compatible)
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:29:0 0x8086 0x2482 A 0x00 9 0 already assigned
000:29:1 0x8086 0x2484 B 0x03 9 0 already assigned
002:05:0 0x1180 0x0476 A 0x05 3 0 already assigned
002:08:0 0x8086 0x1031 A 0x04 9 0 already assigned
------------------------------------------
mainbus0 (root)
pci_addr_fixup: 002:05:0 0x1180 0x0476 new address 0x20000000
pci_addr_fixup: 002:05:1 0x1180 0x0476 new address 0x20001000
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Mobile Pentium 4 (686-class), 1988.58 MHz, id 0xf27
cpu0: features bfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features bfebf9ff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebf9ff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 400<CID>
cpu0: "Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz"
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 128 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: 16 page colors
acpi0 at mainbus0: Advacned Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060113
acpi0: X/RSDT: OemId < SONY, B0,20020801>, AslId <PTL ,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixing up intr link \_SB_.LNKB
acpi_allocate_resources: res=7
acpi0: interrupt allocation failed \_SB_.LNKB
acpi0: fixing up intr link \_SB_.LNKC
acpi_allocate_resources: res=7
acpi0: interrupt allocation failed \_SB_.LNKC
acpi0: fixing up intr link \_SB_.LNKC
acpi_allocate_resources: res=7
acpi0: interrupt allocation failed \_SB_.LNKC
acpi0: fixing up intr link \_SB_.LNKH
acpi_allocate_resources: res=7
acpi0: interrupt allocation failed \_SB_.LNKH
acpi0: fixing up intr link \_SB_.LNKB
acpi_allocate_resources: res=7
acpi0: interrupt allocation failed \_SB_.LNKB
acpi0: fixing up intr link \_SB_.LNKC
acpi_allocate_resources: res=7
acpi0: interrupt allocation failed \_SB_.LNKC
acpi0: fixing up intr link \_SB_.LNKF
acpi_allocate_resources: res=7
acpi0: interrupt allocation failed \_SB_.LNKF
acpi0: fixing up intr link \_SB_.LNKG
acpi_allocate_resources: res=7
acpi0: interrupt allocation failed \_SB_.LNKG
acpi0: fixing up intr link \_SB_.LNKH
acpi_allocate_resources: res=7
acpi0: interrupt allocation failed \_SB_.LNKH
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpi_allocate_resources: res=7
acpi: activate failed for PNP0C0F
acpi_allocate_resources: res=7
acpi: activate failed for PNP0C0F
acpi_allocate_resources: res=7
acpi: activate failed for PNP0C0F
acpi_allocate_resources: res=7
acpi: activate failed for PNP0C0F
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: using exception 16
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (SNY9003): aux port
pckbc2: irq 12
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpibat1 at acpi0 (PNP0C0A-2): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
com0 at acpi0 (PNP0501)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
lpt0 at acpi0 (PNP0401)
lpt0: io 0x378-0x37f,0x778-0x77f irq 7 drq 3
spic0 at acpi0 (SNY6001): Sony Programmable I/O Controller
spic0: io 0x1080-0x109f irq 11
wsmouse0 at spic0 mux 0
sony0 at acpi0 (SNY5001): Sony Miscellaneous Controller
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: passive cooling mode only
acpitz0: critical 89.9C passive 49.9C
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 5.9
pms0: Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse1 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82845 Host (rev. 0x04)
pchb0: random number generator enabled
agp0 at pchb0: aperture at 0xec000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82845 AGP (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M7 LW (AGP) (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801CA USB Controller (rev. 0x02)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801CA USB Controller (rev. 0x02)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801CA USB Controller (rev. 0x02)
pci_intr_map: no mapping for pin C (line=ff)
uhci2: couldn't map interrupt
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x42)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 5 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0xa8)
cbb0: using ioapic for interrupt
cbb1 at pci2 dev 5 function 1: Ricoh 5C476 PCI-CardBus bridge (rev. 0xa8)
cbb1: using ioapic for interrupt
fwohci0 at pci2 dev 5 function 2: Ricoh 5C552 PCI-CardBus bridge/Firewire (rev. 0x00)
pci_intr_map: no mapping for pin D (line=ff)
fwohci0: couldn't map interrupt
fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 66
fxp0: interrupting at irq 9
fxp0: Ethernet address 08:00:46:7a:15:89
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: interrupting at irq 3
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
pci_intr_map: no mapping for pin C (line=00)
cbb1: couldn't map interrupt
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801CAM LPC Interface (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801CA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: interrupting at irq 9
auich0: ac97: Yamaha YMF753-S codec; 18 bit DAC, no 3D stereo
auich0: ac97: ext id 604<AC97_22,AMAP,SPDIF>
auich1 at pci0 dev 31 function 6: i82801CA (ICH3) AC-97 Modem
pci_intr_map: no mapping for pin B (line=ff)
auich1: can't map interrupt
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
WARNING: Callback scheduled before sysmon task queue thread present.
audio0 at auich0: full duplex, independent
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
wi0 at pcmcia0 function 0: <Lucent Technologies, WaveLAN/IEEE, Version 01.01, >
wi0: 802.11 address 00:02:2d:4f:c5:13
wi0: using Sony WaveLAN/IEEE
wi0: Lucent Firmware: Station (6.16.1)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wd0 at atabus0 drive 0: <HITACHI_DK23EA-60>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-R6012, , 1S31> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
fxp0: link state changed to DOWN
wi0: link state changed to UP
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
--==_Exmh_-1490221040
Content-Type: text/plain ; name="dmesg-diff"; charset=us-ascii
Content-Description: dmesg-diff
Content-Disposition: attachment; filename="dmesg-diff"
--- dmesg1 2006-02-24 20:35:57.000000000 -0800
+++ dmesg2 2006-02-24 20:35:35.000000000 -0800
@@ -3,8 +3,8 @@
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
-NetBSD 3.99.15 (CALLEBAUT) #49: Mon Jan 2 18:14:09 PST 2006
- ed@callebaut.wing.org:/usr/src/arch/i386/obj/current/src/sys/arch/i386/compile/CALLEBAUT
+NetBSD 3.99.15 (CALLEBAUT) #56: Sat Feb 25 01:50:42 PST 2006
+ ed@callebaut.wing.org:/nusr/src/arch/i386/obj/current/src/sys/arch/i386/compile/CALLEBAUT
total memory = 511 MB
avail memory = 495 MB
BIOS32 rev. 0 found at 0xfd890
@@ -36,20 +36,49 @@
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: 16 page colors
-acpi0 at mainbus0
-acpi0: using Intel ACPI CA subsystem version 20050408
+acpi0 at mainbus0: Advacned Configuration and Power Interface
+acpi0: using Intel ACPI CA subsystem version 20060113
acpi0: X/RSDT: OemId < SONY, B0,20020801>, AslId <PTL ,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixing up intr link \_SB_.LNKB
+acpi_allocate_resources: res=7
+acpi0: interrupt allocation failed \_SB_.LNKB
acpi0: fixing up intr link \_SB_.LNKC
+acpi_allocate_resources: res=7
+acpi0: interrupt allocation failed \_SB_.LNKC
+acpi0: fixing up intr link \_SB_.LNKC
+acpi_allocate_resources: res=7
+acpi0: interrupt allocation failed \_SB_.LNKC
acpi0: fixing up intr link \_SB_.LNKH
+acpi_allocate_resources: res=7
+acpi0: interrupt allocation failed \_SB_.LNKH
+acpi0: fixing up intr link \_SB_.LNKB
+acpi_allocate_resources: res=7
+acpi0: interrupt allocation failed \_SB_.LNKB
+acpi0: fixing up intr link \_SB_.LNKC
+acpi_allocate_resources: res=7
+acpi0: interrupt allocation failed \_SB_.LNKC
acpi0: fixing up intr link \_SB_.LNKF
+acpi_allocate_resources: res=7
+acpi0: interrupt allocation failed \_SB_.LNKF
acpi0: fixing up intr link \_SB_.LNKG
+acpi_allocate_resources: res=7
+acpi0: interrupt allocation failed \_SB_.LNKG
+acpi0: fixing up intr link \_SB_.LNKH
+acpi_allocate_resources: res=7
+acpi0: interrupt allocation failed \_SB_.LNKH
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
-acpi: activated SNY6001
+acpi_allocate_resources: res=7
+acpi: activate failed for PNP0C0F
+acpi_allocate_resources: res=7
+acpi: activate failed for PNP0C0F
+acpi_allocate_resources: res=7
+acpi: activate failed for PNP0C0F
+acpi_allocate_resources: res=7
+acpi: activate failed for PNP0C0F
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
-PNP0A03 [PCI Bus] at acpi0 not configured
+PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
@@ -78,15 +107,9 @@
lpt0 at acpi0 (PNP0401)
lpt0: io 0x378-0x37f,0x778-0x77f irq 7 drq 3
spic0 at acpi0 (SNY6001): Sony Programmable I/O Controller
-spic0: installing sysctl hooks...
spic0: io 0x1080-0x109f irq 11
wsmouse0 at spic0 mux 0
-spic1 at acpi0 (SNY5001): Sony Programmable I/O Controller
-spic1: ACPI: unable to get _CRS resources: AE_NOT_FOUND
-PNP0C0F [PCI interrupt link device] at acpi0 not configured
-PNP0C0F [PCI interrupt link device] at acpi0 not configured
-PNP0C0F [PCI interrupt link device] at acpi0 not configured
-PNP0C0F [PCI interrupt link device] at acpi0 not configured
+sony0 at acpi0 (SNY5001): Sony Miscellaneous Controller
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
@@ -129,11 +152,8 @@
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801CA USB Controller (rev. 0x02)
-uhci2: interrupting at irq 9
-usb2 at uhci2: USB revision 1.0
-uhub2 at usb2
-uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
-uhub2: 2 ports with 2 removable, self powered
+pci_intr_map: no mapping for pin C (line=ff)
+uhci2: couldn't map interrupt
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x42)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
@@ -142,28 +162,19 @@
cbb1 at pci2 dev 5 function 1: Ricoh 5C476 PCI-CardBus bridge (rev. 0xa8)
cbb1: using ioapic for interrupt
fwohci0 at pci2 dev 5 function 2: Ricoh 5C552 PCI-CardBus bridge/Firewire (rev. 0x00)
-fwohci0: interrupting at irq 9
-fwohci0: OHCI version 1.0 (ROM=1)
-fwohci0: No. of Isochronous channels is 4.
-fwohci0: EUI64 08:00:46:03:01:47:2a:31
-fwohci0: Phy 1394a available S400, 2 ports.
-fwohci0: Link S400, max_rec 2048 bytes.
-ieee1394if0 at fwohci0: IEEE1394 bus
-^TXXM-@ at ieee1394if0 not configured
-fwohci0: Initiate bus reset
+pci_intr_map: no mapping for pin D (line=ff)
+fwohci0: couldn't map interrupt
fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 66
fxp0: interrupting at irq 9
fxp0: Ethernet address 08:00:46:7a:15:89
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
-cbb0: interrupting at irq 9
+cbb0: interrupting at irq 3
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
-cbb1: interrupting at irq 9
-cardslot1 at cbb1 slot 1 flags 0
-cardbus1 at cardslot1: bus 4
-pcmcia1 at cardslot1
+pci_intr_map: no mapping for pin C (line=00)
+cbb1: couldn't map interrupt
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801CAM LPC Interface (rev. 0x02)
piixide0 at pci0 dev 31 function 1
@@ -181,17 +192,12 @@
auich0: ac97: Yamaha YMF753-S codec; 18 bit DAC, no 3D stereo
auich0: ac97: ext id 604<AC97_22,AMAP,SPDIF>
auich1 at pci0 dev 31 function 6: i82801CA (ICH3) AC-97 Modem
-auich1: interrupting at irq 9
-auich1: ac97: Conexant HSD11246 codec; no 3D stereo
-auich1: ac97: ext mid 4009<CID1,LINE1>, secondary codec
-auich1: codec not responding, status=0xff00
+pci_intr_map: no mapping for pin B (line=ff)
+auich1: can't map interrupt
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
WARNING: Callback scheduled before sysmon task queue thread present.
-fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
-ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
-ieee1394if0: bus manager 0 (me)
audio0 at auich0: full duplex, independent
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
@@ -200,37 +206,20 @@
wi0: using Sony WaveLAN/IEEE
wi0: Lucent Firmware: Station (6.16.1)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
-umass0 at uhub2 port 1 configuration 1 interface 0
-umass0: Sony USB Memory Stick Slot, rev 1.10/1.09, addr 2
-umass0: using ATAPI over CBI with CCI
-atapibus0 at umass0: 2 targets
-sd0 at atapibus0 drive 0: <Sony, MSC-U03, 1.00> disk removable
-sd0: drive offline
wd0 at atabus0 drive 0: <HITACHI_DK23EA-60>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
-atapibus1 at atabus1: 2 targets
-cd0 at atapibus1 drive 0: <TOSHIBA DVD-ROM SD-R6012, , 1S31> cdrom removable
+atapibus0 at atabus1: 2 targets
+cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-R6012, , 1S31> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
-sd0(umass0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00
- SENSE KEY: Not Ready
- ASC/ASCQ: Medium Not Present
-
-sd0(umass0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00
- SENSE KEY: Not Ready
- ASC/ASCQ: Medium Not Present
-
-sd0(umass0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00
- SENSE KEY: Not Ready
- ASC/ASCQ: Medium Not Present
-
boot device: wd0
root on wd0a dumps on wd0b
wi0: link state changed to UP
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
--==_Exmh_-1490221040--