Subject: Re: LC Display 1600x1200 with Matrox G400 (connected via DVI)
To: Peter Seebach <seebs@plethora.net>
From: Timo Schoeler <timo.schoeler@riscworks.net>
List: current-users
Date: 02/05/2006 14:58:03
This is a multi-part message in MIME format.
--------------010502030500090309000707
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
Peter Seebach wrote:
> In message <43E5F643.6060006@riscworks.net>, Timo Schoeler writes:
>
>>has anyone running a 20"/21" LCD (1600x1200) and is willing to share
>>some hints and/or the appropriate lines in XF86Config? :)
>
>
> You're working WAYYY too hard.
>
> Section "Monitor"
> DisplaySize 427 320 # mm
> Identifier "Monitor0"
> VendorName "Samsung"
> ModelName "Samsung 213T"
> # VertRefresh 60.0
> # Analog:
> # HorizSync 30.0-81.0
> # VertRefresh 56.0-75.0
> # Digital:
> # HorizSync 30-75
> # VertRefresh 56-60
> Option "DPMS"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> DefaultDepth 24
> SubSection "Display"
> Viewport 0 0
> Depth 24
> Modes "1600x1200"
> #Modes "1600x1200@74"
> EndSubSection
> EndSection
>
> ModeLines are useful ONLY in the VERY UNUSUAL case that specifying the right
> refresh rates doesn't work and the VESA stuff isn't working. I have probably
> never had a modeline work when the plain setup didn't since the turn of the
> century. Note that the commented-out lines aren't in use, they're bits and
> pieces of old configurations on other hardware.
>
> The other thing I have, which may not even be having an effect, is:
>
> Option "CloneVRefresh" "60-60" # [<str>]
>
> in my video card section. I don't think this is doing anything, though.
> Since the VESA/PNP/whatever negotation works, everything does the right thing
> if you do NOT try to override it, at least on my system.
>
> -s
thanks, i tried to uncomment/delete unneeded lines, and the log shows no
problems as far as i can see, but the display still states 'Out of Sync'.
i attached the logfile as well as my XF86Config.
thanks! :)
timo
--------------010502030500090309000707
Content-Type: text/plain; x-mac-type="0"; x-mac-creator="0";
name="XFree86.0.log"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="XFree86.0.log"
XFree86 Version 4.5.0
Release Date: 16 March 2005
X Protocol Version 11, Revision 0
Build Operating System:NetBSD/i386 3.0 - The NetBSD Foundation, Inc.
Current Operating System: NetBSD deneb.ts39-bln.riscworks.net 3.0_STABLE NetBSD 3.0_STABLE (GENERIC.MP) #0: Sun Jan 29 18:31:53 CET 2006 root@deneb.ts39-bln.riscworks.net:/usr/obj/sys/arch/i386/compile/GENERIC.MP i386
Build Date: 19 December 2005
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Command line: X :0
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (EE) error, (WW) warning,
(II) informational, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Feb 5 14:54:56 2006
(==) Using config file: "/etc/X11/XF86Config".
Parse error on line 342 of section Monitor in file /etc/X11/XF86Config
The Option keyword requires 1 or 2 quoted strings to follow it.
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.3
XFree86 Video Driver: 0.8
XFree86 XInput driver : 0.5
XFree86 Server Extension : 0.3
XFree86 Font Renderer : 0.5
(II) Loader running on netbsd
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled.
(==) ServerLayout "Simple Layout"
(==) |-->Screen "Screen 1" (0) (0, 0)
(**) | |-->Device "G400"
(**) | |-->Monitor "VP2030b" (0)
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(II) Checking for unused ServerFlags options:
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font Bitmap
(--) Using wscons driver in pcvt compatibility mode (version 3.32)
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1166,0008 card 0000,0000 rev 22 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1166,0009 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:00:2: chip 1166,0006 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:00:3: chip 1166,0006 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:07:0: chip 8086,1229 card 8086,3000 rev 08 class 02,00,00 hdr 00
(II) PCI: 00:0f:0: chip 1166,0200 card 1166,0200 rev 50 class 06,01,00 hdr 80
(II) PCI: 00:0f:1: chip 1166,0211 card 0000,0000 rev 00 class 01,01,8a hdr 80
(II) PCI: 00:0f:2: chip 1166,0220 card 1166,0220 rev 04 class 0c,03,10 hdr 80
(II) PCI: 01:00:0: chip 102b,0525 card 102b,23c3 rev 85 class 03,00,00 hdr 00
(II) PCI: 02:01:0: chip 9005,00c0 card 9005,f620 rev 01 class 01,00,00 hdr 80
(II) PCI: 02:01:1: chip 9005,00c0 card 9005,f620 rev 01 class 01,00,00 hdr 80
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:0:1), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf8200000 - 0xf8ffffff (0xe00000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 2: bridge is at (0:0:2), (-1,2,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 2 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:0:3), (-1,-1,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:15:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) Matrox Graphics, Inc. MGA G400 AGP rev 133, Mem @ 0xfc000000/25, 0xf8200000/14, 0xf8800000/23
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xfa000000 from 0xfbffffff to 0xf9ffffff
(II) PCI Memory resource overlap reduced 0xf8100000 from 0xf81fffff to 0xf80fffff
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xffffffff to 0xf81fffff
(II) Active PCI resource ranges:
[0] -1 0 0xfe001000 - 0xfe001fff (0x1000) MX[B]E
[1] -1 0 0xfe000000 - 0xffffffff (0x2000000) MX[B]E
[2] -1 0 0xf8102000 - 0xf8103fff (0x2000) MX[B]E
[3] -1 0 0xf8000000 - 0xf81fffff (0x200000) MX[B]E
[4] -1 0 0xf8101000 - 0xf8101fff (0x1000) MX[B]E
[5] -1 0 0xf8800000 - 0xf8ffffff (0x800000) MX[B](B)
[6] -1 0 0xf8200000 - 0xf8203fff (0x4000) MX[B](B)
[7] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
[8] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[9] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[10] -1 0 0x00001040 - 0x0000107f (0x40) IX[B]E
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
(II) Inactive PCI resource ranges:
[0] -1 0 0xf8100000 - 0xf80fffff (0x0) MX[B]EO
[1] -1 0 0xfa000000 - 0xf9ffffff (0x0) MX[B]EO
(II) PCI Memory resource overlap reduced 0xfe000000 from 0xffffffff to 0xfe000fff
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xf81fffff to 0xf80fffff
(II) PCI I/O resource overlap reduced 0x00001000 from 0x000010ff to 0x0000103f
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfe001000 - 0xfe001fff (0x1000) MX[B]E
[1] -1 0 0xfe000000 - 0xfe000fff (0x1000) MX[B]E
[2] -1 0 0xf8102000 - 0xf8103fff (0x2000) MX[B]E
[3] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[B]E
[4] -1 0 0xf8101000 - 0xf8101fff (0x1000) MX[B]E
[5] -1 0 0xf8800000 - 0xf8ffffff (0x800000) MX[B](B)
[6] -1 0 0xf8200000 - 0xf8203fff (0x4000) MX[B](B)
[7] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
[8] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[9] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[10] -1 0 0x00001040 - 0x0000107f (0x40) IX[B]E
[11] -1 0 0x00001000 - 0x0000103f (0x40) IX[B]E
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xf8100000 - 0xf80fffff (0x0) MX[B]EO
[1] -1 0 0xfa000000 - 0xf9ffffff (0x0) MX[B]EO
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfe001000 - 0xfe001fff (0x1000) MX[B]E
[6] -1 0 0xfe000000 - 0xfe000fff (0x1000) MX[B]E
[7] -1 0 0xf8102000 - 0xf8103fff (0x2000) MX[B]E
[8] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[B]E
[9] -1 0 0xf8101000 - 0xf8101fff (0x1000) MX[B]E
[10] -1 0 0xf8800000 - 0xf8ffffff (0x800000) MX[B](B)
[11] -1 0 0xf8200000 - 0xf8203fff (0x4000) MX[B](B)
[12] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
[13] -1 0 0xf8100000 - 0xf80fffff (0x0) MX[B]EO
[14] -1 0 0xfa000000 - 0xf9ffffff (0x0) MX[B]EO
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[18] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[19] -1 0 0x00001040 - 0x0000107f (0x40) IX[B]E
[20] -1 0 0x00001000 - 0x0000103f (0x40) IX[B]E
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font Speedo
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project & the After X-TT Project"
compiled for 4.5.0, module version = 2.1.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "mga"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.1.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.5
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
mgag550
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset mgag400 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfe001000 - 0xfe001fff (0x1000) MX[B]E
[6] -1 0 0xfe000000 - 0xfe000fff (0x1000) MX[B]E
[7] -1 0 0xf8102000 - 0xf8103fff (0x2000) MX[B]E
[8] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[B]E
[9] -1 0 0xf8101000 - 0xf8101fff (0x1000) MX[B]E
[10] -1 0 0xf8800000 - 0xf8ffffff (0x800000) MX[B](B)
[11] -1 0 0xf8200000 - 0xf8203fff (0x4000) MX[B](B)
[12] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
[13] -1 0 0xf8100000 - 0xf80fffff (0x0) MX[B]EO
[14] -1 0 0xfa000000 - 0xf9ffffff (0x0) MX[B]EO
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[18] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[19] -1 0 0x00001040 - 0x0000107f (0x40) IX[B]E
[20] -1 0 0x00001000 - 0x0000103f (0x40) IX[B]E
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfe001000 - 0xfe001fff (0x1000) MX[B]E
[6] -1 0 0xfe000000 - 0xfe000fff (0x1000) MX[B]E
[7] -1 0 0xf8102000 - 0xf8103fff (0x2000) MX[B]E
[8] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[B]E
[9] -1 0 0xf8101000 - 0xf8101fff (0x1000) MX[B]E
[10] -1 0 0xf8800000 - 0xf8ffffff (0x800000) MX[B](B)
[11] -1 0 0xf8200000 - 0xf8203fff (0x4000) MX[B](B)
[12] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
[13] -1 0 0xf8100000 - 0xf80fffff (0x0) MX[B]EO
[14] -1 0 0xfa000000 - 0xf9ffffff (0x0) MX[B]EO
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[21] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[22] -1 0 0x00001040 - 0x0000107f (0x40) IX[B]E
[23] -1 0 0x00001000 - 0x0000103f (0x40) IX[B]E
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.8
(--) MGA(0): Chipset: "mgag400" (G450)
(**) MGA(0): Depth 24, (--) framebuffer bpp 24
(==) MGA(0): RGB weight 888
(--) MGA(0): Linear framebuffer at 0xFC000000
(--) MGA(0): MMIO registers at 0xF8200000
(--) MGA(0): Pseudo-DMA transfer window at 0xF8800000
(==) MGA(0): BIOS at 0xC0000
(--) MGA(0): Video BIOS info block at offset 0x07CA0
(WW) MGA(0): Video BIOS info block not detected!
(II) MGA(0): MGABios.RamdacType = 0x0
(WW) MGA(0): remove MTRR f8200000 - f8204000
(WW) MGA(0): set MTRR fc000000 - fe000000
(WW) MGA(0): remove MTRR f8800000 - f9000000
(--) MGA(0): VideoRAM: 32768 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.8
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.8
(WW) MGA(0): remove MTRR f8200000 - f8204000
(WW) MGA(0): set MTRR fc000000 - fe000000
(WW) MGA(0): remove MTRR f8800000 - f9000000
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(WW) MGA(0): remove MTRR a0000 - b0000
(II) MGA(0): I2C bus "DDC P1" initialized.
(II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
(II) MGA(0): I2C device "DDC P1:ddc2" removed.
(II) MGA(0): I2C Monitor info: 0x83ea000
(II) MGA(0): Manufacturer: VSC Model: 131c Serial#: 16843009
(II) MGA(0): Year: 2005 Week: 49
(II) MGA(0): EDID Version: 1.3
(II) MGA(0): Digital Display Input
(II) MGA(0): Max H-Image Size [cm]: horiz.: 41 vert.: 31
(II) MGA(0): Gamma: 2.20
(II) MGA(0): DPMS capabilities: Off; RGB/Color Display
(II) MGA(0): Default color space is primary color space
(II) MGA(0): First detailed timing is preferred mode
(II) MGA(0): redX: 0.648 redY: 0.339 greenX: 0.289 greenY: 0.598
(II) MGA(0): blueX: 0.143 blueY: 0.078 whiteX: 0.313 whiteY: 0.329
(II) MGA(0): Supported VESA Video Modes:
(II) MGA(0): 720x400@70Hz
(II) MGA(0): 640x480@60Hz
(II) MGA(0): 640x480@67Hz
(II) MGA(0): 640x480@72Hz
(II) MGA(0): 640x480@75Hz
(II) MGA(0): 800x600@56Hz
(II) MGA(0): 800x600@60Hz
(II) MGA(0): 800x600@72Hz
(II) MGA(0): 800x600@75Hz
(II) MGA(0): 832x624@75Hz
(II) MGA(0): 1024x768@60Hz
(II) MGA(0): 1024x768@70Hz
(II) MGA(0): 1024x768@75Hz
(II) MGA(0): 1280x1024@75Hz
(II) MGA(0): 1152x870@75Hz
(II) MGA(0): Manufacturer's mask: 0
(II) MGA(0): Supported Future Video Modes:
(II) MGA(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) MGA(0): #1: hsize: 1400 vsize 1050 refresh: 75 vid: 20368
(II) MGA(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
(II) MGA(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) MGA(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) MGA(0): #5: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) MGA(0): #6: hsize: 640 vsize 640 refresh: 70 vid: 2609
(II) MGA(0): Supported additional Video Mode:
(II) MGA(0): clock: 162.0 MHz Image Size: 408 x 306 mm
(II) MGA(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) MGA(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
(II) MGA(0): Serial No: PSB054901240
(II) MGA(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 92 kHz, PixClock max 170 MHz
(II) MGA(0): Monitor name: VP2030 SERIES
(II) MGA(0): end of I2C Monitor info
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 360 MHz
(II) MGA(0): Adding detailed EDID mode 1600x1200 to monitor (preferred: yes).
(II) MGA(0): VP2030b: Using hsync range of 30.00-92.00 kHz
(II) MGA(0): VP2030b: Using vrefresh range of 50.00-75.00 Hz
(II) MGA(0): Clock range: 12.00 to 360.00 MHz
(II) MGA(0): Not using default mode "640x350" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x175" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x400" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x200" (vrefresh out of range)
(II) MGA(0): Not using default mode "720x400" (vrefresh out of range)
(II) MGA(0): Not using default mode "360x200" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x240" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MGA(0): Not using default mode "512x384" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MGA(0): Not using default mode "512x384" (vrefresh out of range)
(II) MGA(0): Not using default mode "1280x960" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x512" (vrefresh out of range)
(WW) (1600x1200,VP2030b) mode clock 175.5MHz exceeds DDC maximum 170MHz
(WW) (1600x1200,VP2030b) mode clock 189MHz exceeds DDC maximum 170MHz
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(WW) (1792x1344,VP2030b) mode clock 204.8MHz exceeds DDC maximum 170MHz
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "896x672" (hsync out of range)
(WW) (1856x1392,VP2030b) mode clock 218.3MHz exceeds DDC maximum 170MHz
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(WW) (1920x1440,VP2030b) mode clock 234MHz exceeds DDC maximum 170MHz
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(**) MGA(0): Preferred mode size is 1600x1200
(II) MGA(0): Not using default mode "1792x1344" because it is larger than the preferred mode (1600x1200).
(II) MGA(0): Not using default mode "1856x1392" because it is larger than the preferred mode (1600x1200).
(II) MGA(0): Not using default mode "1920x1440" because it is larger than the preferred mode (1600x1200).
(--) MGA(0): Has SDRAM
(--) MGA(0): Virtual size is 1600x1200 (pitch 1600)
(**) MGA(0): *Preferred EDID mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250
(**) MGA(0): Default mode "1600x1200": 189.0 MHz, 87.5 kHz, 70.0 Hz
(II) MGA(0): Modeline "1600x1200" 189.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
(**) MGA(0): Default mode "1600x1200": 175.5 MHz, 81.2 kHz, 65.0 Hz
(II) MGA(0): Modeline "1600x1200" 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
(**) MGA(0): Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
(**) MGA(0): Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
(II) MGA(0): Modeline "1400x1050" 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync
(**) MGA(0): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) MGA(0): Modeline "1400x1050" 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
(**) MGA(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) MGA(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) MGA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) MGA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) MGA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) MGA(0): Default mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz
(II) MGA(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
(**) MGA(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) MGA(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) MGA(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) MGA(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) MGA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) MGA(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) MGA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) MGA(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) MGA(0): Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "960x720" 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync
(**) MGA(0): Default mode "928x696": 109.2 MHz, 86.4 kHz, 60.1 Hz (D)
(II) MGA(0): Modeline "928x696" 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync
(**) MGA(0): Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "896x672" 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync
(**) MGA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) MGA(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) MGA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) MGA(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) MGA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) MGA(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) MGA(0): Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(II) MGA(0): Modeline "800x600" 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) MGA(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(II) MGA(0): Modeline "800x600" 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) MGA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MGA(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) MGA(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "800x600" 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) MGA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) MGA(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) MGA(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(II) MGA(0): Modeline "700x525" 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync
(**) MGA(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync
(**) MGA(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync
(**) MGA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync
(**) MGA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) MGA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) MGA(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) MGA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) MGA(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) MGA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync
(**) MGA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync
(**) MGA(0): Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D)
(II) MGA(0): Modeline "576x432" 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync
(**) MGA(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) MGA(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(**) MGA(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) MGA(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(**) MGA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) MGA(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
(**) MGA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) MGA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) MGA(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) MGA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) MGA(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) MGA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) MGA(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) MGA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) MGA(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(**) MGA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) MGA(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
(**) MGA(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync
(**) MGA(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) MGA(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync
(**) MGA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) MGA(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(--) MGA(0): Display dimensions: (410, 310) mm
(--) MGA(0): DPI set to (99, 98)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.8
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.8
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf8800000 - 0xf8ffffff (0x800000) MX[B]
[1] 0 0 0xf8200000 - 0xf8203fff (0x4000) MX[B]
[2] 0 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B]
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xfe001000 - 0xfe001fff (0x1000) MX[B]E
[9] -1 0 0xfe000000 - 0xfe000fff (0x1000) MX[B]E
[10] -1 0 0xf8102000 - 0xf8103fff (0x2000) MX[B]E
[11] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[B]E
[12] -1 0 0xf8101000 - 0xf8101fff (0x1000) MX[B]E
[13] -1 0 0xf8800000 - 0xf8ffffff (0x800000) MX[B](B)
[14] -1 0 0xf8200000 - 0xf8203fff (0x4000) MX[B](B)
[15] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B](B)
[16] -1 0 0xf8100000 - 0xf80fffff (0x0) MX[B]EO
[17] -1 0 0xfa000000 - 0xf9ffffff (0x0) MX[B]EO
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[24] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[25] -1 0 0x00001040 - 0x0000107f (0x40) IX[B]E
[26] -1 0 0x00001000 - 0x0000103f (0x40) IX[B]E
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(WW) MGA(0): remove MTRR f8200000 - f8204000
(WW) MGA(0): set MTRR fc000000 - fe000000
(WW) MGA(0): remove MTRR f8800000 - f9000000
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(WW) MGA(0): remove MTRR a0000 - b0000
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): Using 2295 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
19 256x256 slots
6 512x512 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(--) MGA(0): DPMS enabled
(II) MGA(0): Using overlay video
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "wsmouse"
(**) Mouse1: Protocol: wsmouse
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/wsmouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1/, removing from list!
--------------010502030500090309000707
Content-Type: text/plain; x-mac-type="0"; x-mac-creator="0";
name="XF86Config"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="XF86Config"
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "VP2030b"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-92
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# VertRefresh 60
# 1600x1200 @ 60.00 Hz (GTF) hsync: 74.52 kHz; pclk: 160.96 MHz
# Modeline "1600x1200_60.00" 160.96 1600 1704 1880 2160 1200 1201 1204 1242 -HSync +Vsync
Option DPMS
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "G400"
Driver "mga"
#VideoRam 32768
# Option "mga_sdram"
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "G400"
Monitor "VP2030b"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1600x1200"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1600x1200"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1600x1200"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
--------------010502030500090309000707--