Hi,

I did a lot of homework before posting.Uhhh...in my case even very very -current
won't resolv that issue:) I think some nasty bug still drifts there...

Thank you!




Tsiteerin "John R. Shannon" <john@johnrshannon.com>:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> I use that same driver successfully under 1.6ZG. There was a fix to the pcix
> bus code, around the beginning of October, that fixed quite a bit.
> 
> On Wednesday 17 December 2003 10:27 am, you wrote:
> > Hi,
> >
> > I'm not sure whether this is related with interrupt routing issues or bug
> > in -current ahd driver.I get a lot of scsi dumps when compiling kernel or
> > usin tar.
> > This card is 2 channel Adaptec HostRAID (unfortunately under linux/win
> > only).
> >
> >
> > dmesg: ahd1: PCI error Interrupt (full dump included in ahd1.dmesg)
> >
> > NetBSD 1.6ZE (GENERIC) #0: Fri Nov 14 00:56:49 UTC 2003
> >
> >
> autobuild@tgm.netbsd.org:/autobuild/HEAD/i386/OBJ/autobuild/HEAD/src/sys/ar
> >ch/i386/compile/GENERIC total memory = 511 MB
> > avail memory = 466 MB
> > using 6144 buffers containing 26292 KB of memory
> > BIOS32 rev. 0 found at 0xf9900
> > mainbus0 (root)
> > cpu0 at mainbus0: (uniprocessor)
> > cpu0: Intel Pentium 4 (686-class), 2666.34 MHz, id 0xf29
> > cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
> > cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
> > cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
> > cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
> > cpu0: L2 cache 512 KB 64b/line 8-way
> > cpu0: ITLB 4K/4M: 128 entries
> > cpu0: DTLB 4K/4M: 64 entries
> > cpu0: 16 page colors
> > pci0 at mainbus0 bus 0: configuration mode 1
> > pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> > pchb0 at pci0 dev 0 function 0
> > pchb0: Intel 82845 Host (rev. 0x11)
> > agp0 at pchb0: aperture at 0xe3000000, size 0x400000
> > ppb0 at pci0 dev 1 function 0: Intel 82845 AGP (rev. 0x11)
> > pci1 at ppb0 bus 1
> > pci1: i/o space, memory space enabled
> > ppb1 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev.
> 0x05)
> > pci2 at ppb1 bus 2
> > pci2: i/o space, memory space enabled
> > ahd0 at pci2 dev 1 function 0
> > ahd0: interrupting at irq 10
> > ahd0: aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512
> > SCBs scsibus0 at ahd0: 16 targets, 8 luns per target
> > ahd1 at pci2 dev 1 function 1
> > ahd1: interrupting at irq 11
> > ahd1: aic7901A: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512
> > SCBs scsibus1 at ahd1: 16 targets, 8 luns per target
> > fxp0 at pci2 dev 6 function 0: i82550 Ethernet, rev 13
> > fxp0: interrupting at irq 5
> > fxp0: Ethernet address 00:0d:61:2a:93:ae
> > inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
> > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> > fxp1 at pci2 dev 7 function 0: i82550 Ethernet, rev 13
> > fxp1: interrupting at irq 10
> > fxp1: Ethernet address 00:0d:61:2a:93:af
> > inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
> > inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> > vga1 at pci2 dev 8 function 0: ATI Technologies Rage XL (rev. 0x27)
> > wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
> > wsmux1: connecting to wsdisplay0
> > pcib0 at pci0 dev 31 function 0
> > pcib0: Intel 82801BA LPC Interface Bridge (rev. 0x05)
> > piixide0 at pci0 dev 31 function 1
> > piixide0: Intel 82801BA IDE Controller (ICH2) (rev. 0x05)
> > piixide0: bus-master DMA support present
> > piixide0: primary channel wired to compatibility mode
> > piixide0: primary channel interrupting at irq 14
> > atabus0 at piixide0 channel 0
> > piixide0: secondary channel wired to compatibility mode
> > piixide0: secondary channel interrupting at irq 15
> > atabus1 at piixide0 channel 1
> > uhci0 at pci0 dev 31 function 2: Intel 82801BA USB Controller (rev. 0x05)
> > uhci0: interrupting at irq 11
> > usb0 at uhci0: USB revision 1.0
> > uhub0 at usb0
> > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> > uhub0: 2 ports with 2 removable, self powered
> > Intel 82801BA SMBus Controller (SMBus serial bus, revision 0x05) at pci0
> > dev 31 function 3 not configured
> > uhci1 at pci0 dev 31 function 4: Intel 82801BA USB Controller (rev. 0x05)
> > uhci1: interrupting at irq 9
> > usb1 at uhci1: USB revision 1.0
> > uhub1 at usb1
> > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> > uhub1: 2 ports with 2 removable, self powered
> > isa0 at pcib0
> > com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> > com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
> > pckbc0 at isa0 port 0x60-0x64
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > pckbc0: using irq 12 for aux slot
> > wsmouse0 at pms0 mux 0
> > lpt0 at isa0 port 0x378-0x37b irq 7
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: PC speaker
> > sysbeep0 at pcppi0
> > isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
> > npx0 at isa0 port 0xf0-0xff: using exception 16
> > fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> > isapnp0: no ISA Plug 'n Play devices found
> > fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
> > Kernelized RAIDframe activated
> > scsibus0: waiting 2 seconds for devices to settle...
> > scsibus1: waiting 2 seconds for devices to settle...
> > atapibus0 at atabus0: 2 targets
> > cd0 at atapibus0 drive 0: <_NEC    CD-ROM  CD-3002A, , C000> cdrom
> > removable cd0: 32-bit data port
> > cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
> > cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using
> DMA
> > data
> > transfers)
> > st0 at scsibus0 target 3 lun 0: <HP, C7438A, V303> tape removable
> > st0: drive empty
> > st0: sync (50.00ns offset 32), 16-bit (40.000MB/s) transfers
> > sd0 at scsibus1 target 0 lun 0: <MAXTOR, ATLAS10K4_36WLS, DFV0> disk fixed
> > sd0: 35074 MB, 49070 cyl, 2 head, 731 sec, 512 bytes/sect x 71833096
> > sectors sd0: sync (6.25ns offset 127), 16-bit (320.000MB/s) transfers,
> > tagged queueing sd1 at scsibus1 target 1 lun 0: <MAXTOR, ATLAS10K4_36WLS,
> > DFV0> disk fixed sd1: 35074 MB, 49070 cyl, 2 head, 731 sec, 512 bytes/sect
> > x 71833096 sectors sd1: sync (6.25ns offset 127), 16-bit (320.000MB/s)
> > transfers, tagged queueing sd2 at scsibus1 target 2 lun 0: <MAXTOR,
> > ATLAS10K4_36SCA, DFL0> disk fixed sd2: 35074 MB, 49070 cyl, 2 head, 731
> > sec, 512 bytes/sect x 71833096 sectors sd2: sync (6.25ns offset 127),
> > 16-bit (320.000MB/s) transfers, tagged queueing boot device: sd0
> > root on sd0a dumps on sd0b
> > root file system type: ffs
> > wsdisplay0: screen 1 added (80x25, vt100 emulation)
> > wsdisplay0: screen 2 added (80x25, vt100 emulation)
> > wsdisplay0: screen 3 added (80x25, vt100 emulation)
> > wsdisplay0: screen 4 added (80x25, vt100 emulation)
> >
> >
> >
> >
> >
> > ----------------------------------------------------------------
> > Powered By "NetBSD" http://www.netbsd.org
> 
> - --
> 
> John R. Shannon
> john@johnrshannon.com
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.3 (NetBSD)
> 
> iEYEARECAAYFAj/glAIACgkQOKbCxya4HYs0mgCgsl52aeUwijfIggAZKOkKPFSE
> 2N4AoIE6+r0/g0M/t3LmW2/G3o86gzLN
> =+02B
> -----END PGP SIGNATURE-----
> 




----------------------------------------------------------------
Powered By "NetBSD" http://www.netbsd.org