Subject: Re: piixide freezes
To: None <current-users@netbsd.org>
From: Patrick Welche <prlw1@newn.cam.ac.uk>
List: current-users
Date: 10/26/2003 14:35:19
With current of today, no total freeze, just a hesitation, so I actually
have something in the logfile:

Oct 26 13:59:38 quartz /netbsd: cd0(piixide0:1:0):  Check Condition on CDB: 0x28 00 00 00 00 00 00 00 01 00
Oct 26 13:59:38 quartz /netbsd:     SENSE KEY:  Illegal Request
Oct 26 13:59:38 quartz /netbsd:      ASC/ASCQ:  Illegal Mode For This Track
Oct 26 13:59:38 quartz /netbsd:
Oct 26 13:59:38 quartz /netbsd: cd0: dos partition I/O error
Oct 26 14:02:39 quartz /netbsd: cd0(piixide0:1:0):  Check Condition on CDB: 0x43 00 00 00 00 00 00 00 0c 40
Oct 26 14:02:39 quartz /netbsd:     SENSE KEY:  Illegal Request
Oct 26 14:02:39 quartz /netbsd:      ASC/ASCQ:  Illegal Field in CDB
Oct 26 14:02:39 quartz /netbsd:
Oct 26 14:02:39 quartz /netbsd: cd0(piixide0:1:0):  Check Condition on CDB: 0x28 00 00 00 00 00 00 00 01 00
Oct 26 14:02:39 quartz /netbsd:     SENSE KEY:  Illegal Request
Oct 26 14:02:39 quartz /netbsd:      ASC/ASCQ:  Logical Block Address Out of Range
Oct 26 14:02:39 quartz /netbsd: 
Oct 26 14:02:39 quartz /netbsd: cd0: dos partition I/O error
Oct 26 14:02:39 quartz /netbsd: cd0(piixide0:1:0):  Check Condition on CDB: 0x43 00 00 00 00 00 00 00 0c 40
Oct 26 14:02:39 quartz /netbsd:     SENSE KEY:  Illegal Request
Oct 26 14:02:39 quartz /netbsd:      ASC/ASCQ:  Illegal Field in CDB
Oct 26 14:02:39 quartz /netbsd: 
Oct 26 14:06:50 quartz /netbsd: piixide0:1:0: lost interrupt
Oct 26 14:07:56 quartz /netbsd:     type: atapi tc_bcount: 0 tc_skip: 0
Oct 26 14:07:59 quartz /netbsd: piixide0:1:0: reset failed
Oct 26 14:07:59 quartz /netbsd: ex0: uplistptr was 0
Oct 26 14:07:59 quartz /netbsd: piixide0:1:0: unbusy timed out
Oct 26 14:07:59 quartz /netbsd: piixide0:1:0: reset failed
Oct 26 14:07:59 quartz /netbsd: ex0: uplistptr was 0
Oct 26 14:07:59 quartz /netbsd: piixide0:1:0: unbusy timed out
Oct 26 14:07:59 quartz /netbsd: piixide0:1:0: reset failed
Oct 26 14:07:59 quartz /netbsd: ex0: uplistptr was 0
Oct 26 14:07:59 quartz /netbsd: piixide0:1:0: unbusy timed out
Oct 26 14:08:07 quartz /netbsd: piixide0:1:0: piomode timed out
Oct 26 14:08:18 quartz /netbsd: piixide0:1:0: piomode timed out


> piixide0 at pci0 dev 31 function 1
> piixide0: Intel 82801BA IDE Controller (ICH2) (rev. 0x04)
> piixide0: bus-master DMA support present
> piixide0: primary channel wired to compatibility mode
> piixide0: primary channel interrupting at irq 14 
> atabus0 at piixide0 channel 0  
> piixide0: secondary channel wired to compatibility mode
> piixide0: secondary channel interrupting at irq 15
> atabus1 at piixide0 channel 1
> wd0 at atabus0 drive 0: <Maxtor 7Y250P0>
> wd0: drive supports 16-sector PIO transfers, LBA48 addressing
> wd0: 233 GB, 486344 cyl, 16 head, 63 sec, 512 bytes/sect x 490234752 sectors
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
> wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
> atapibus0 at atabus1: 2 targets
> cd0 at atapibus0 drive 0: <24X10, , P.MJ> cdrom removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2
> cd1 at atapibus0 drive 1: <TOSHIBA DVD-ROM SD-M1612, , 1004> cdrom removable
> cd1: 32-bit data port
> cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
> cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
> cd1(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)