Subject: Promise ATA RAID on ASUS motherboard
To: None <current-users@netbsd.org>
From: Bruce J.A. Nourish <bjan+current-users@bjan.net>
List: current-users
Date: 07/30/2003 12:42:09
Hey everyone,
I've just bought myself a WD Raptor. My motherboard, an ASUS A7V8X,
has a Promise SATA RAID controller; to use a SATA drive, you have to
set it up as part of a RAID array. So this is what I ended up with:
Promise RAID controller:
- Raptor on Primary SATA } Combined into a single array,
- Caviar on Parallel Cable } RAID 0, using BIOS tools.
Primary IDE Controller:
- Maxtor drive
- CDRW
Secondary IDE Controller:
- DVD-ROM
- ZIP drive
I am running NetBSD-current, as of a few days ago. My kernel config
(included completely at the end) includes the appropriate ataraid
device.
My problem is that NetBSD does not find the controller: nothing appears
in dmesg about ataraid. It does pick up on a Promise serial ATA controller
and sets it up as pciide0 but both channels appear as disabled. The
parallel ATA controller(s) are found as pciide1 and all the connected
drives work fine.
Any ideas? I know ATA RAID is quite new but I was under the impression
that promise controllers were supported. I'll be happy to send any more
information if it would be useful, but I am currently on a low bandwith
link, so it may take me a while.
Thanks!
[dmesg]
NetBSD 1.6U (STARMAIDEN-$Revision: 0.2 $) #3: Sun Jul 27 17:24:22 MST 2003
root@starmaiden.bjan.net:/usr/src/sys/arch/i386/compile/STARMAIDEN
total memory = 255 MB
avail memory = 232 MB
using 3297 buffers containing 13188 KB of memory
BIOS32 rev. 0 found at 0xf16f0
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon XP 2100+ (686-class), 1733.49 MHz, id 0x681
cpu0: features c3c3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features c3c3fbff<PGE,MCA,CMOV,PAT,PSE36,MMXX,MMX>
cpu0: features c3c3fbff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: calibrating local timer
cpu0: apic clock running at 266 MHz
cpu0: 8 page colors
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 3, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20030228
acpi0: X/RSDT: OemId <ASUS ,A7V8X ,42302e31>, AslId <MSFT,31313031>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0C01 [System Board] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: using exception 16
fdc0 at acpi0 (PNP0700)
fdc0: io 0x3f2-0x3f5,0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
lpt0 at acpi0 (PNP0401)
lpt0: io 0x378-0x37f,0x778-0x77b irq 7 drq 3
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
com1 at acpi0 (PNP0501-2)
com1: io 0x2f8-0x2ff irq 3
com1: ns16550a, working fifo
PNP0303 [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
configuring bus 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8377 Apollo KT400 CPU to PCI Bridge (rev. 0x00)
agp0 at pchb0: aperture at 0xf0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8377 CPU-AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies Radeon 7500 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
fwohci0 at pci0 dev 7 function 0: VIA Technologies VT3606 OHCI IEEE 1394 Controller (rev. 0x80)
fwohci0: interrupting at apic 2 int 17 (irq 10)
fwohci0: OHCI 1.0, 00:e0:18:00:00:0c:be:46, 400Mb/s, 2048 max_rec, 4 ir_ctx, 8 it_ctx
pciide0 at pci0 dev 8 function 0: Promise Serial ATA/150 TX2plus Bus Master IDE Accelerator (rev. 0x02)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
pciide0: primary channel ignored (disabled)
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel ignored (disabled)
bge0 at pci0 dev 9 function 0: Broadcom BCM5702X Gigabit Ethernet
bge0: interrupting at apic 2 int 18 (irq 5)
bge0: ASIC BCM5703 A2, Ethernet address 00:e0:18:d2:a2:8a
brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
puc0 at pci0 dev 11 function 0: SIIG Cyber 2S1P PCI 16C550 (10x family) (com, com, lpt)
com2 at puc0 port 0: interrupting at apic 2 int 19 (irq 9)
com2: ns16550a, working fifo
com3 at puc0 port 1: interrupting at apic 2 int 19 (irq 9)
com3: ns16550a, working fifo
lpt1 at puc0 port 2: interrupting at apic 2 int 19 (irq 9)
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x80)
uhci0: interrupting at apic 2 int 21 (irq 9)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x80)
uhci1: interrupting at apic 2 int 21 (irq 9)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x80)
uhci2: interrupting at apic 2 int 21 (irq 9)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
VIA Technologies product 0x3104 (USB serial bus, interface 0x20, revision 0x82) at pci0 dev 16 function 3 not configured
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev. 0x00)
pciide1 at pci0 dev 17 function 1: VIA Technologies VT8235 ATA133 controller
pciide1: bus-master DMA support present
pciide1: primary channel configured to compatibility mode
atapibus0 at pciide1 channel 0: 2 targets
cd0 at atapibus0 drive 1: <CD-RW IDE5224, , VER 001> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at pciide1 channel 0 drive 0: <Maxtor 91303D6>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 12427 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 25450992 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide1: primary channel interrupting at irq 14
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide1: secondary channel configured to compatibility mode
atapibus1 at pciide1 channel 1: 2 targets
cd1 at atapibus1 drive 0: <HITACHI DVD-ROM GD-2500, , 0101> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2
sd0 at atapibus1 drive 1: <IOMEGA ZIP 100 ATAPI, , 23.D> disk removable
sd0: drive offline
sd0: 32-bit data port
pciide1: secondary channel interrupting at irq 15
cd1(pciide1:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
sd0(pciide1:1:1): using PIO mode 3
auvia0 at pci0 dev 17 function 5: VIA VT8235 AC'97 Audio (rev 0x50)
auvia0: interrupting at apic 2 int 22 (irq 9)
auvia0: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D
auvia0: variable rate audio, double rate output, S/PDIF, center DAC, surround DAC, LFE DAC
audio0 at auvia0: full duplex, mmap, independent
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
ioapic0: enabling
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
fw0 at fwohci0: 00:e0:18:00:00:0c:be:46:0a:02:ff:ff:f0:01:00:00
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
uhub2: port error, restarting port 1
uhub2: port error, giving up port 1
uhub2: port error, restarting port 2
uhub2: port error, giving up port 2
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: PCally Peripherals PCally USB & PS/2 Optical Internet Mouse, rev 1.10/0.01, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
IP Filter: v3.4.29 initialized. Default = pass all, Logging = enabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
[kernel conf]
# $NetBSD: GENERIC,v 1.565 2003/07/06 04:03:21 kochi Exp $
#
# GENERIC machine description file
#
# This machine description file is used to generate the default NetBSD
# kernel. The generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page. For further information about kernel options
# for this architecture, see the options(4) man page. For an explanation
# of each device driver in this file see the section 4 man page for the
# device.
include "arch/i386/conf/std.i386"
#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
ident "STARMAIDEN-$Revision: 0.2 $"
maxusers 32 # estimated number of users
# CPU support. At least one is REQUIRED.
#options I386_CPU
#options I486_CPU
#options I586_CPU
options I686_CPU
# CPU-related options.
#options MATH_EMULATE # floating point emulation
options VM86 # virtual 8086 emulation
options USER_LDT # user-settable LDT; used by WINE
# insert delay no-ops in interrupts; recommended on very old machines
#options PIC_DELAY
options MTRR # memory-type range register syscall support
# doesn't work with MP just yet..
#options PERFCTRS # performance-monitoring counters support
# delay between "rebooting ..." message and hardware reset, in milliseconds
#options CPURESET_DELAY=2000
# This option allows you to force a serial console at the specified
# I/O address. see console(4) for details.
#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
# you don't want the option below ON iff you are using the
# serial console option of the new boot strap code.
#options CONS_OVERRIDE # Always use above! independent of boot info
# The following options override the memory sizes passed in from the boot
# block. Use them *only* if the boot block is unable to determine the correct
# values. Note that the BIOS may *correctly* report less than 640k of base
# memory if the extended BIOS data area is located at the top of base memory
# (as is the case on most recent systems).
#options REALBASEMEM=639 # size of base memory (in KB)
#options REALEXTMEM=15360 # size of extended memory (in KB)
# Standard system options
options INSECURE # disable kernel security levels - X needs this
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
options NTP # NTP phase/frequency locked loop
options KTRACE # system call tracing via ktrace(1)
options SYSTRACE # system call vetting via systrace(1)
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
#options SEMMNI=10 # number of semaphore identifiers
#options SEMMNS=60 # number of semaphores in system
#options SEMUME=10 # max number of undo entries per process
#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V-like memory sharing
#options SHMMAXPGS=2048 # 2048 pages is the default
options P1003_1B_SEMAPHORE # p1003.1b semaphore support
options LKM # loadable kernel modules
options USERCONF # userconf(4) support
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
# Beep when it is safe to power down the system (requires sysbeep)
options BEEP_ONHALT
# Some tunable details of the above feature (default values used below)
#options BEEP_ONHALT_COUNT=3 # Times to beep
#options BEEP_ONHALT_PITCH=1500 # Default frequency (in Hz)
#options BEEP_ONHALT_PERIOD=250 # Default duration (in msecs)
# Enable experimental buffer queue strategy for better responsiveness under
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
#options NEW_BUFQ_STRATEGY
# Diagnostic/debugging support options
#options DIAGNOSTIC # expensive kernel consistency checks
#options DEBUG # expensive debugging checks/support
#options KMEMSTATS # kernel memory statistics (vmstat -m)
options DDB # in-kernel debugger
options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
#options KGDB # remote debugger
#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
#makeoptions DEBUG="-g" # compile full symbol table
# Compatibility options
#options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI
#options COMPAT_09 # NetBSD 0.9
#options COMPAT_10 # NetBSD 1.0
#options COMPAT_11 # NetBSD 1.1
#options COMPAT_12 # NetBSD 1.2, 386BSD, and BSDI
#options COMPAT_13 # NetBSD 1.3, 386BSD, and BSDI
#options COMPAT_14 # NetBSD 1.4
options COMPAT_15 # NetBSD 1.5
#options COMPAT_43 # 4.3BSD, 386BSD, and BSDI
options COMPAT_386BSD_MBRPART # recognize old partition ID
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
options COMPAT_OSSAUDIO # OSS (Voxware) audio driver compatibility
#options COMPAT_SVR4 # binary compatibility with SVR4
#options COMPAT_IBCS2 # binary compatibility with SCO and ISC
options COMPAT_LINUX # binary compatibility with Linux
options COMPAT_FREEBSD # binary compatibility with FreeBSD
#options COMPAT_MACH # binary compatibility with Mach binaries
#options COMPAT_DARWIN # binary compatibility with Darwin binaries
#options EXEC_MACHO # exec MACH-O binaries
#options COMPAT_PECOFF # kernel support to run Win32 apps
# File systems
file-system FFS # UFS
file-system EXT2FS # second extended file system (linux)
file-system LFS # log-structured file system
file-system MFS # memory file system
file-system NFS # Network File System client
file-system NTFS # Windows/NT file system (experimental)
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
file-system FDESC # /dev/fd
file-system KERNFS # /kern
file-system NULLFS # loopback file system
file-system OVERLAY # overlay file system
file-system PORTAL # portal filesystem (still experimental)
file-system PROCFS # /proc
file-system UMAPFS # NULLFS + uid and gid remapping
file-system UNION # union file system
#file-system CODA # Coda File System; also needs vcoda (below)
file-system SMBFS # experimental - CIFS; also needs nsmb (below)
# File system options
options QUOTA # UFS quotas
#options FFS_EI # FFS Endian Independent support
options SOFTDEP # FFS soft updates support.
options NFSSERVER # Network File System server
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
# Networking options
options GATEWAY # packet forwarding
options INET # IP + ICMP + TCP + UDP
options INET6 # IPV6
options IPSEC # IP security
options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_DEBUG # debug for IP security
#options MROUTING # IP multicast routing
#options NS # XNS
#options NSIP # XNS tunneling over IP
#options ISO,TPIP # OSI
#options EON # OSI tunneling over IP
#options CCITT,LLC,HDLC # X.25
#options NETATALK # AppleTalk networking protocols
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options ACPIVERBOSE # verbose ACPI device autoconfig messages
#options EISAVERBOSE # verbose EISA device autoconfig messages
options MIIVERBOSE # verbose PHY autoconfig messages
options PCIVERBOSE # verbose PCI device autoconfig messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
#options PCMCIAVERBOSE # verbose PCMCIA configuration messages
options SCSIVERBOSE # human readable SCSI error messages
options USBVERBOSE # verbose USB device autoconfig messages
#options PNPBIOSVERBOSE # verbose PnP BIOS messages
#options PNPBIOSDEBUG # more fulsome PnP BIOS debugging messages
#options I2OVERBOSE # verbose I2O driver messages
#options MCAVERBOSE # verbose MCA device autoconfig messages
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
#
# wscons options
#
# builtin terminal emulations
#options WSEMUL_SUN # sun terminal emulation
options WSEMUL_VT100 # VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options WS_KERNEL_FG=WSCOL_GREEN
#options WS_KERNEL_BG=WSCOL_BLACK
# compatibility to other console drivers
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
options WSDISPLAY_COMPAT_USL # VT handling
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
#options WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options PCDISPLAY_SOFTCURSOR
# modify the screen type of the console; defaults to "80x25"
#options VGA_CONSOLE_SCREENTYPE="\"80x24\""
# work around a hardware bug that loaded fonts don't work; found on ATI cards
#options VGA_CONSOLE_ATI_BROKEN_FONTSEL
# the following enables some functions to get mouse console support.
# if you want a really secure system, it may be better not to enable them,
# see wsmoused(8), section SECURITY CONSIDERATIONS for more info.
options WSDISPLAY_CHARFUNCS # mouse console support
#enable VGA raster mode capable of displaying multilingual text on console
#options VGA_RASTERCONSOLE
# Kernel root file system and dump configuration.
config netbsd root on ? type ?
#config netbsd root on sd0a type ffs
#config netbsd root on ? type nfs
#
# Device configuration
#
mainbus0 at root
cpu* at mainbus?
ioapic* at mainbus?
# Doesn't do anything yet.
#p64h2apic* at pci? dev? function? # P64H2 IOxAPIC
#apm0 at mainbus0 # Advanced power management
# Tuning for power management, see apm(4) for more details.
#options APM_NO_IDLE # Don't call BIOS CPU idle function
#options APM_V10_ONLY # Use only the APM 1.0 calls
#options APM_NO_POWEROFF # Don't power off on halt(8)
#options APM_POWER_PRINT # Print stats on the console
#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
# Basic Bus Support
# Advanced Control and Power Interface
# This option can be used to retrieve CPU and APIC information.
# that I/O APICs can be used if ACPI is enabled below.
# To use the I/O APIC(s), enable the ioapic line above.
#options MPBIOS # configure CPUs and APICs using MPBIOS
#options MPBIOS_SCANPCI # find PCI roots using MPBIOS
options MPACPI # configure CPUs and APICs using ACPI
# (acpi at mainbus must also be enabled)
options MPACPI_SCANPCI # find PCI roots using MPACPI
acpi0 at mainbus0
#options ACPI_PCI_FIXUP # PCI interrupt routing via ACPI
#options ACPI_ACTIVATE_DEV # If set, activate inactive devices
# ACPI devices
#acpiacad* at acpi? # ACPI AC Adapter
#acpibat* at acpi? # ACPI Battery
acpibut* at acpi? # ACPI Button
#acpiec* at acpi? # ACPI Embedded Controller
#acpilid* at acpi? # ACPI Lid Switch
acpitz* at acpi? # ACPI Thermal Zone
# Mainboard devices
com* at acpi? # Serial communications interface
fdc* at acpi? # Floppy disk controller
lpt* at acpi? # Parallel port
npx* at acpi? # Math coprocessor
#pckbc* at acpi? # PC keyboard controller
#wss* at acpi? # NeoMagic 256AV in wss mode
# Sony Vaio jog dial
#spic* at acpi? # Sony Programmable I/O Controller
#wsmouse* at spic?
# Toshiba Libretto devices
#vald* at acpi?
# Plug-and-Play BIOS and attached devices
#pnpbios* at mainbus?
# mainboard audio chips
#ess* at pnpbios? index ? # ESS AudioDrive
#sb* at pnpbios? index ? # NeoMagic 256AV in sb mode
#wss* at pnpbios? index ? # NeoMagic 256AV in wss mode
#ym* at pnpbios? index ? # OPL3-SA3
# com port
# If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial
# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there
# will be no com0. A side effect is pcmcia (and other) com? previously
# starting at com3 may attach as com1 or com2.
#com* at pnpbios? index ? # serial ports
# parallel port
# The above "com*" comments apply, cf. "lpt0" under "ISA parallel
# "printer interfaces".
#lpt* at pnpbios? index ? # parallel ports
#pckbc* at pnpbios? index ? # PC keyboard/mouse controller
#fdc* at pnpbios? index ? # floppy controller
# IDE controller on Toshiba Portege 3000 series (crippled PCI device)
#pciide* at pnpbios? index ?
# PCI bus support
pci* at mainbus? bus ?
pci* at pchb? bus ?
pci* at ppb? bus ?
# Configure PCI using BIOS information
#options PCIBIOS # PCI BIOS support
#options PCIBIOSVERBOSE # PCI BIOS verbose info
#options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses
#options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
#options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
#options PCIBIOS_INTR_GUESS # see pcibios(4)
#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup
# System Controllers
#elansc* at pci? dev ? function ? # AMD Elan SC520 System Controller
# PCI bridges
pchb* at pci? dev ? function ? # PCI-Host bridges
#p0ceb* at pci? dev ? function ? # PCI-EISA bridges
pcib* at pci? dev ? function ? # PCI-ISA bridges
#pcmb* at pci? dev ? function ? # PCI-MCA bridges
ppb* at pci? dev ? function ? # PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them here
puc* at pci? dev ? function ? # PCI "universal" comm. cards
agp* at pchb?
# EISA bus support
#eisa0 at mainbus?
#eisa0 at pceb?
# ISA bus support
#isa0 at mainbus?
#isa0 at pceb?
isa0 at pcib?
# PCMCIA bus support
#pcmcia* at pcic? controller ? socket ?
#pcmcia* at tcic? controller ? socket ?
# MCA bus support
#mca0 at mainbus?
#
# ISA PCMCIA controllers
#pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
#pcic1 at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
#pcic2 at isa? port 0x3e4 iomem 0xe0000 iosiz 0x4000
#tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x10000
# PCI PCMCIA controllers
#pcic0 at pci? dev? function ?
# ISA Plug-and-Play bus support
#isapnp0 at isa?
# ISA Plug-and-Play PCMCIA controllers
#pcic* at isapnp?
# CardBus bridge support
#cbb* at pci? dev ? function ?
#cardslot* at cbb?
# CardBus bus support
#cardbus* at cardslot?
#pcmcia* at cardslot?
# Coprocessor Support
# Math Coprocessor support
#npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
# Console Devices
# ISA console
#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver
# Keyboard layout configuration for pccons
#options FRENCH_KBD
#options FINNISH_KBD
#options GERMAN_KBD
#options NORWEGIAN_KBD
# pccons-specific options:
#options XSERVER_DDB # PF12 gets you into DDB when X is running
options XSERVER # X server support
# wscons
pckbc0 at isa? # pc keyboard controller
pckbd* at pckbc? # PC keyboard
pms* at pckbc? # PS/2 mouse for wsmouse
#options PMS_DISABLE_POWERHOOK # Disable PS/2 reset on resume
#vga0 at isa?
vga* at pci? dev ? function ?
pcdisplay0 at isa? # CGA, MDA, EGA, HGA
#machfb* at pci? dev ? function ? # ATI Mach64 framebuffer driver
wsdisplay* at vga? console ?
wsdisplay* at pcdisplay? console ?
#wsdisplay* at machfb? console ?
wskbd* at pckbd? console ?
wsmouse* at pms? mux 0
pcppi0 at isa?
sysbeep0 at pcppi?
# Serial Devices
# PCI serial interfaces
com* at puc? port ? # 16x50s on "universal" comm boards
#cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards
#cz* at pci? dev ? function ? # Cyclades-Z multi-port serial boards
# ISA Plug-and-Play serial interfaces
#com* at isapnp? # Modems and serial boards
# PCMCIA serial interfaces
#com* at pcmcia? function ? # Modems and serial cards
#pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
#com* at pcmcom? slave ? # ...and the slave devices
# CardBus serial interfaces
#com* at cardbus? dev ? function ? # Modems and serial cards
# ISA serial interfaces
#options COM_HAYESP # adds Hayes ESP serial board support
#com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
#com1 at isa? port 0x2f8 irq 3
#com2 at isa? port 0x3e8 irq 5
#com3 at isa? port 0x2e8 irq 9
#ast0 at isa? port 0x1a0 irq 5 # AST 4-port serial cards
#com* at ast? slave ?
#boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards
#boca0 at isa? port 0x100 irq 5 # BOCA 16-port serial cards (BB2016)
#boca1 at isa? port 0x140 irq 5 # this line is also needed for BB2016
#com* at boca? slave ?
#tcom0 at isa? port 0x100 irq 7 # TC-800 8-port serial cards
#com* at tcom? slave ?
#rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards
#com* at rtfps? slave ?
#cy0 at isa? iomem 0xd4000 irq 12 # Cyclades serial cards
#addcom0 at isa? port 0x108 irq 5 # Addonics FlexPort 8S
#com* at addcom? slave ?
#moxa0 at isa? port 0x100 irq 5 # MOXA C168H serial card (experimental)
#com* at moxa? slave ?
# MCA serial interfaces
#com* at mca? slot ? # 16x50s on comm boards
# Parallel Printer Interfaces
# PCI parallel printer interfaces
lpt* at puc? port ? # || ports on "universal" comm boards
# ISA parallel printer interfaces
#lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
#lpt1 at isa? port 0x278
#lpt2 at isa? port 0x3bc
# Hardware monitors
# LM7[89] and compatible hardware monitors
#lm0 at isa? port 0x290 # other common ports: 0x280, 0x310
# VIA VT82C686A hardware monitor
#viapm* at pci? dev ? function ?
#viaenv* at viapm?
# I2O devices
#iop* at pci? dev ? function ? # I/O processor
#iopsp* at iop? tid ? # SCSI/FC-AL ports
#ld* at iop? tid ? # block devices
#dpti* at iop? tid 0 # DPT/Adaptec control interface
# SCSI Controllers and Devices
# PCI SCSI controllers
#adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI
#adw* at pci? dev ? function ? # AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
#ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
#ahd* at pci? dev ? function ? # Adaptec 29320, 39320 (aic790x) SCSI
#bha* at pci? dev ? function ? # BusLogic 9xx SCSI
#dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID
#iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI
#isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FibreChannel
#mly* at pci? dev ? function ? # Mylex AcceleRAID and eXtremeRAID
#mpt* at pci? dev ? function ? # LSI Fusion SCSI/FC
#pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI
#siop* at pci? dev ? function ? # Symbios 53c8xx SCSI
#options SIOP_SYMLED # drive the act. LED in software
#trm* at pci? dev ? function ? # Tekram DC-395U/UW/F, DC-315/U SCSI
# EISA SCSI controllers
#ahb* at eisa? slot ? # Adaptec 174[02] SCSI
#ahc* at eisa? slot ? # Adaptec 274x, aic7770 SCSI
#bha* at eisa? slot ? # BusLogic 7xx SCSI
#dpt* at eisa? slot ? # DPT EATA SCSI
#uha* at eisa? slot ? # UltraStor 24f SCSI
# PCMCIA SCSI controllers
#aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
#esp* at pcmcia? function ? # Qlogic ESP406/FAS408 SCSI
# ISA Plug-and-Play SCSI controllers
#aha* at isapnp? # Adaptec AHA-154[02
#aic* at isapnp? # Adaptec AHA-1520B
# ISA SCSI controllers
#adv0 at isa? port ? irq ? drq ? # AdvanSys APB-514[02] SCSI
#aha0 at isa? port 0x330 irq ? drq ? # Adaptec 154[02] SCSI
#aha1 at isa? port 0x334 irq ? drq ?
#ahc0 at isa? port ? irq ? # Adaptec 284x SCSI
#aic0 at isa? port 0x340 irq 11 # Adaptec 152[02] SCSI
#bha0 at isa? port 0x330 irq ? drq ? # BusLogic [457]4X SCSI
#bha1 at isa? port 0x334 irq ? drq ?
# The "nca" and "dpt" probes might give false hits or hang your machine.
#dpt0 at isa? port 0x170 irq ? drq ? # DPT SmartCache/SmartRAID
#nca0 at isa? port 0x360 irq 15 # Port-mapped NCR 53C80 controller
#nca1 at isa? iomem 0xd8000 irq 5 # Memory-mapped controller (T128, etc.)
#sea0 at isa? iomem 0xc8000 irq 5 # Seagate/Future Domain SCSI
#uha0 at isa? port 0x330 irq ? drq ? # UltraStor [13]4f SCSI
#uha1 at isa? port 0x340 irq ? drq ?
#wds0 at isa? port 0x350 irq 15 drq 6 # WD7000 and TMC-7000 controllers
#wds1 at isa? port 0x358 irq 11 drq 5
# CardBus SCSI cards
#adv* at cardbus? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI
#ahc* at cardbus? dev ? function ? # Adaptec ADP-1480
# MCA SCSI cards
#aha* at mca? slot ? # Adaptec AHA-1640
# SCSI bus support
#scsibus* at scsi?
# SCSI devices
sd* at scsibus? target ? lun ? # SCSI disk drives
st* at scsibus? target ? lun ? # SCSI tape drives
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
ch* at scsibus? target ? lun ? # SCSI autochangers
ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
ss* at scsibus? target ? lun ? # SCSI scanners
uk* at scsibus? target ? lun ? # SCSI unknown
# RAID controllers and devices
#aac* at pci? dev ? function ? # Adaptec AAC family
#amr* at pci? dev ? function ? # AMI/LSI Logic MegaRAID
#cac* at eisa? slot ? # Compaq EISA array controllers
#cac* at pci? dev ? function ? # Compaq PCI array controllers
#icp* at pci? dev ? function ? # ICP-Vortex GDT & Intel RAID
#mlx* at pci? dev ? function ? # Mylex DAC960 & DEC SWXCR family
#mlx* at eisa? slot ? # Mylex DAC960 & DEC SWXCR family
#twe* at pci? dev ? function ? # 3ware Escalade RAID controllers
#ld* at aac? unit ? # logical disk devices
#ld* at amr? unit ?
#ld* at cac? unit ?
#ld* at icp? unit ?
#ld* at twe? unit ?
#ld* at mlx? unit ?
#icpsp* at icp? unit ? # SCSI pass-through
# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide* at pci? dev ? function ? flags 0x0000
# ISA Plug-and-Play IDE controllers
#wdc* at isapnp?
# PCMCIA IDE controllers
#wdc* at pcmcia? function ?
# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
#wdc0 at isa? port 0x1f0 irq 14 flags 0x00
#wdc1 at isa? port 0x170 irq 15 flags 0x00
# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
#wd* at wdc? channel ? drive ? flags 0x0000
wd* at pciide? channel ? drive ? flags 0x0000
# ATA RAID configuration support, as found on some Promise controllers.
pseudo-device ataraid
ld* at ataraid? vendtype ? unit ?
# ATAPI bus support
atapibus* at atapi?
# ATAPI devices
# flags have the same meaning as for IDE drives.
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives
uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
# Miscellaneous mass storage devices
# ISA floppy
#fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
#fdc1 at isa? port 0x370 irq ? drq ?
fd* at fdc? drive ? # the drives themselves
# some machines need you to do this instead of fd*
#fd0 at fdc0 drive 0
# ISA CD-ROM devices
#mcd0 at isa? port 0x300 irq 10 # Mitsumi CD-ROM drives
# ISA tape devices
# note: the wt driver conflicts unpleasantly with SMC boards at the
# same I/O address. The probe reprograms their EEPROMs. Don't
# uncomment it unless you are actually using it.
#wt0 at isa? port 0x308 irq 5 drq 1 # Archive and Wangtek QIC tape drives
# MCA ESDI devices
#edc* at mca? slot ? # IBM ESDI Disk Controllers
#ed* at edc?
# Network Interfaces
# PCI network interfaces
#an* at pci? dev ? function ? # Aironet PC4500/PC4800 (802.11)
bge* at pci? dev ? function ? # Broadcom 570x gigabit Ethernet
#en* at pci? dev ? function ? # ENI/Adaptec ATM
#ep* at pci? dev ? function ? # 3Com 3c59x
#epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
#esh* at pci? dev ? function ? # Essential HIPPI card
#ex* at pci? dev ? function ? # 3Com 90x[BC]
#fpa* at pci? dev ? function ? # DEC DEFPA FDDI
#fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B
#gsip* at pci? dev ? function ? # NS83820 Gigabit Ethernet
#hme* at pci? dev ? function ? # Sun Microelectronics STP2002-STQ
#le* at pci? dev ? function ? # PCnet-PCI Ethernet
#lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3
#mtd* at pci? dev ? function ? # Myson MTD803 3-in-1 Ethernet
#ne* at pci? dev ? function ? # NE2000-compatible Ethernet
#ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial
#pcn* at pci? dev ? function ? # AMD PCnet-PCI Ethernet
#rtk* at pci? dev ? function ? # Realtek 8129/8139
#sf* at pci? dev ? function ? # Adaptec AIC-6915 Ethernet
#sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet
#ste* at pci? dev ? function ? # Sundance ST-201 Ethernet
#stge* at pci? dev ? function ? # Sundance/Tamarack TC9021 Gigabit
#ti* at pci? dev ? function ? # Alteon ACEnic gigabit Ethernet
#tl* at pci? dev ? function ? # ThunderLAN-based Ethernet
#tlp* at pci? dev ? function ? # DECchip 21x4x and clones
#vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
#wi* at pci? dev ? function ? # Intersil Prism Mini-PCI (802.11b)
#wm* at pci? dev ? function ? # Intel 82543/82544 gigabit
# EISA network interfaces
#ep* at eisa? slot ? # 3Com 3c579 Ethernet
#fea* at eisa? slot ? # DEC DEFEA FDDI
#tlp* at eisa? slot ? # DEC DE-425 Ethernet
# ISA Plug-and-Play network interfaces
#an* at isapnp? # Aironet 802.11
#ep* at isapnp? # 3Com 3c509 Ethernet
#fmv* at isapnp? # Fujitsu FMV-183
#le* at isapnp? # AMD PCnet-ISA Ethernet
#ne* at isapnp? # NE2000-compatible Ethernet
#tr* at isapnp? # IBM/3COM TROPIC Token-Ring
# PCMCIA network interfaces
#an* at pcmcia? function ? # Aironet PC4500/PC4800 (802.11)
#awi* at pcmcia? function ? # BayStack 650/660 (802.11FH/DS)
#cnw* at pcmcia? function ? # Xircom/Netwave AirSurfer
#ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
#mbe* at pcmcia? function ? # MB8696x based Ethernet
#ne* at pcmcia? function ? # NE2000-compatible Ethernet
#ray* at pcmcia? function ? # Raytheon Raylink (802.11)
#sm* at pcmcia? function ? # Megahertz Ethernet
# tr at pcmcia has problems with Cardbus bridges
#tr* at pcmcia? function ? # TROPIC based Token-Ring
#wi* at pcmcia? function ? # Lucent/Intersil WaveLan IEEE (802.11)
#xi* at pcmcia? function ? # Xircom CreditCard Ethernet
#mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
#com* at mhzc?
#sm* at mhzc?
# ISA network interfaces
#ate0 at isa? port 0x2a0 irq ? # AT1700
#cs0 at isa? port 0x300 iomem ? irq ? drq ? # CS8900 Ethernet
#ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
#eg0 at isa? port 0x280 irq 9 # 3C505 ethernet cards
#el0 at isa? port 0x300 irq 9 # 3C501 ethernet cards
#ep* at isa? port ? irq ? # 3C509 ethernet cards
#ef0 at isa? port 0x360 iomem 0xd0000 irq 7 # 3C507
#ai0 at isa? port 0x360 iomem 0xd0000 irq 7 # StarLAN
#fmv0 at isa? port 0x2a0 irq ? # FMV-181/182
#ix0 at isa? port 0x300 irq 10 # EtherExpress/16
#iy0 at isa? port 0x360 irq ? # EtherExpress PRO 10 ISA
#lc0 at isa? port 0x320 iomem ? irq ? # DEC EtherWORKS III (LEMAC)
#depca0 at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5 # DEPCA
#le* at depca?
#nele0 at isa? port 0x320 irq 9 drq 7 # NE2100
#le* at nele?
#ntwoc0 at isa? port 0x300 irq 5 iomem 0xc8000 flags 1 # Riscom/N2 sync serial
#bicc0 at isa? port 0x320 irq 10 drq 7 # BICC IsoLan
#le* at bicc?
#ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards
#ne1 at isa? port 0x300 irq 10
#sm0 at isa? port 0x300 irq 10 # SMC91C9x Ethernet
#tr0 at isa? port 0xa20 iomem 0xd8000 irq ? # IBM TROPIC based Token-Ring
#tr1 at isa? port 0xa24 iomem 0xd0000 irq ? # IBM TROPIC based Token-Ring
#tr* at isa? port ? irq ? # 3COM TROPIC based Token-Ring
#we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet
#we1 at isa? port 0x300 iomem 0xcc000 irq 10
# CardBus network cards
#ex* at cardbus? dev ? function ? # 3Com 3C575TX
#fxp* at cardbus? dev ? function ? # Intel i8255x
#rtk* at cardbus? dev ? function ? # Realtek 8129/8139
#tlp* at cardbus? dev ? function ? # DECchip 21143
# MCA network cards
#elmc* at mca? slot ? # 3Com EtherLink/MC (3c523)
#ep* at mca? slot ? # 3Com EtherLink III (3c529)
#we* at mca? slot ? # WD/SMC Ethernet
#ate* at mca? slot ? # Allied Telesis AT1720
#ne* at mca? slot ? # Novell NE/2 and clones
#tr* at mca? slot ? # IBM Token Ring adapter
#le* at mca? slot ? # SKNET Personal/MC2+
# MII/PHY support
#acphy* at mii? phy ? # Altima AC101 and AMD Am79c874 PHYs
#amhphy* at mii? phy ? # AMD 79c901 Ethernet PHYs
#bmtphy* at mii? phy ? # Broadcom BCM5201 and BCM5202 PHYs
brgphy* at mii? phy ? # Broadcom BCM5400-family PHYs
#dmphy* at mii? phy ? # Davicom DM9101 PHYs
#exphy* at mii? phy ? # 3Com internal PHYs
#gentbi* at mii? phy ? # Generic Ten-Bit 1000BASE-[CLS]X PHYs
#glxtphy* at mii? phy ? # Level One LXT-1000 PHYs
#gphyter* at mii? phy ? # NS83861 Gig-E PHY
#icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x
#inphy* at mii? phy ? # Intel 82555 PHYs
#iophy* at mii? phy ? # Intel 82553 PHYs
#lxtphy* at mii? phy ? # Level One LXT-970 PHYs
#makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs
#nsphy* at mii? phy ? # NS83840 PHYs
#nsphyter* at mii? phy ? # NS83843 PHYs
#pnaphy* at mii? phy ? # generic HomePNA PHYs
#qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
#sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
#tlphy* at mii? phy ? # ThunderLAN PHYs
#tqphy* at mii? phy ? # TDK Semiconductor PHYs
#ukphy* at mii? phy ? # generic unknown PHYs
#urlphy* at mii? phy ? # Realtek RTL8150L internal PHYs
# USB Controller and Devices
# PCI USB controllers
# The EHCI is not ready for prime time.
#ehci* at pci? dev ? function ? # Enhanced Host Controller
ohci* at pci? dev ? function ? # Open Host Controller
uhci* at pci? dev ? function ? # Universal Host Controller (Intel)
# CardBus USB controllers
#ehci* at cardbus? dev ? function ? # Enhanced Host Controller
#ohci* at cardbus? dev ? function ? # Open Host Controller
# ISA USB controllers
#slhci0 at isa? port 0x300 irq 5 # ScanLogic SL811HS
# USB bus support
#usb* at ehci?
usb* at ohci?
usb* at uhci?
#usb* at slhci?
# USB Hubs
uhub* at usb?
uhub* at uhub? port ? configuration ? interface ?
# USB HID device
uhidev* at uhub? port ? configuration ? interface ?
# USB Mice
ums* at uhidev? reportid ?
wsmouse* at ums? mux 0
# USB Keyboards
ukbd* at uhidev? reportid ?
wskbd* at ukbd? console ? mux 1
# USB Generic HID devices
uhid* at uhidev? reportid ?
# USB Printer
ulpt* at uhub? port ? configuration ? interface ?
# USB Modem
umodem* at uhub? port ? configuration ?
ucom* at umodem?
# USB Mass Storage
umass* at uhub? port ? configuration ? interface ?
wd* at umass?
scsibus* at umass? channel ?
# USB audio
uaudio* at uhub? port ? configuration ?
# USB MIDI
umidi* at uhub? port ? configuration ?
# USB IrDA
# USB-IrDA bridge spec
#irda* at uhub? port ? configuration ? interface ?
#irframe* at uirda?
# SigmaTel STIr4200 USB/IrDA Bridge
#ustir* at uhub? port ?
#irframe* at ustir?
# USB Ethernet adapters
#aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
#cue* at uhub? port ? # CATC USB-EL1201A based adapters
#kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
#uax* at uhub? port ? # ASIX AX88172 based adapters
#url* at uhub? port ? # Realtek RTL8150L based adapters
# Prolific PL2301/PL2302 host-to-host adapter
#upl* at uhub? port ?
# Serial adapters
#ubsa* at uhub? port ? # Belkin serial adapter
#ucom* at ubsa? portno ?
#uftdi* at uhub? port ? # FTDI FT8U100AX serial adapter
#ucom* at uftdi? portno ?
#umct* at uhub? port ? # MCT USB-RS232 serial adapter
#ucom* at umct? portno ?
#uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
#ucom* at uplcom? portno ?
#uvscom* at uhub? port ? # SUNTAC Slipper U VS-10U serial adapter
#ucom* at uvscom? portno ?
# Diamond Multimedia Rio 500
#urio* at uhub? port ?
# USB Handspring Visor
#uvisor* at uhub? port ?
#ucom* at uvisor?
# USB scanners
uscanner* at uhub? port ?
# USB scanners that use SCSI emulation, e.g., HP5300
usscanner* at uhub? port ?
# Y@P firmware loader
#uyap* at uhub? port ?
# D-Link DSB-R100 USB radio
#udsbr* at uhub? port ?
#radio* at udsbr?
# USB Generic driver
ugen* at uhub? port ?
# IrDA and Consumer Ir devices
# Toshiba Oboe
#oboe* at pci? dev ? function ?
#irframe* at oboe?
# PCI IEEE1394 controllers
fwohci* at pci? dev ? function ? # IEEE1394 Open Host Controller
# CardBus IEEE1394 controllers
#fwohci* at cardbus? dev ? function ? # IEEE1394 Open Host Controller
fw* at fwbus? # IP over 1394
# IEEE1394 nodes
fwnode* at fwbus? idhi ? idlo ?
sbpscsi* at fwnode?
scsibus* at sbpscsi?
# Audio Devices
# PCI audio devices
#auich* at pci? dev ? function ? # Intel ICH integrated AC'97 Audio
#autri* at pci? dev ? function ? # Trident 4DWAVE based AC'97 Audio
auvia* at pci? dev ? function ? # VIA VT82C686A integrated AC'97 Audio
#clcs* at pci? dev ? function ? # Cirrus Logic CS4280
#clct* at pci? dev ? function ? # Cirrus Logic CS4281
#cmpci* at pci? dev ? function ? # C-Media CMI8338/8738
#eap* at pci? dev ? function ? # Ensoniq AudioPCI
#emuxki* at pci? dev ? function ? # Creative SBLive! and PCI512
#esa* at pci? dev ? function ? # ESS Allegro-1 / Maestro-3 PCI Audio
#esm* at pci? dev ? function ? # ESS Maestro-1/2/2e PCI Audio Accelerator
#eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive
#fms* at pci? dev ? function ? # Forte Media FM801
#neo* at pci? dev ? function ? # NeoMagic 256 AC'97 Audio
#sv* at pci? dev ? function ? # S3 SonicVibes
#yds* at pci? dev ? function ? # Yamaha DS-1 PCI Audio
# ISA Plug-and-Play audio devices
#ess* at isapnp? # ESS Tech ES1887, ES1888, ES888 audio
#guspnp* at isapnp? # Gravis Ultra Sound PnP audio
#sb* at isapnp? # SoundBlaster-compatible audio
#wss* at isapnp? # Windows Sound System
#ym* at isapnp? # Yamaha OPL3-SA3 audio
# ISA audio devices
# the "aria" probe might give false hits
#aria0 at isa? port 0x290 irq 10 # Aria
#ess0 at isa? port 0x220 irq 5 drq 1 drq2 5 # ESS 18XX
#gus0 at isa? port 0x220 irq 7 drq 1 drq2 6 # Gravis Ultra Sound
#pas0 at isa? port 0x220 irq 7 drq 1 # ProAudio Spectrum
#pss0 at isa? port 0x220 irq 7 drq 6 # Personal Sound System
#sp0 at pss0 port 0x530 irq 10 drq 0 # sound port driver
#sb0 at isa? port 0x220 irq 5 drq 1 drq2 5 # SoundBlaster
#wss0 at isa? port 0x530 irq 10 drq 0 drq2 1 # Windows Sound System
# PCMCIA audio devices
#esl* at pcmcia? function ? # ESS 1688 AudioDrive
#cms0 at isa? port 0x220 # Creative Music System
# OPL[23] FM synthesizers
#opl0 at isa? port 0x388 # use only if not attached to sound card
#opl* at cmpci? flags 1
#opl* at esl?
#opl* at eso?
#opl* at ess?
#opl* at fms?
#opl* at sb?
#opl* at sv?
#opl* at wss?
#opl* at yds?
#opl* at ym?
# Audio support
audio* at audiobus?
# MPU 401 UARTs
#mpu* at isa? port 0x330 irq 9 # MPU401 or compatible card
#mpu* at cmpci?
#mpu* at eso?
#mpu* at fms?
#mpu* at sb?
#mpu* at yds?
#mpu* at ym?
# MIDI support
midi* at midibus?
midi* at pcppi? # MIDI interface to the PC speaker
# The spkr driver provides a simple tone interface to the built in speaker.
spkr0 at pcppi? # PC speaker
# FM-Radio devices
# ISA radio devices
#az0 at isa? port 0x350 # Aztech/PackardBell FM Radio Card
#az1 at isa? port 0x358
#rt0 at isa? port 0x20c # AIMS Lab Radiotrack & compatible
#rt1 at isa? port 0x284
#rt2 at isa? port 0x30c
#rt3 at isa? port 0x384
#rtii0 at isa? port 0x20c # AIMS Lab Radiotrack II FM Radio Card
#rtii1 at isa? port 0x30c
#sf2r0 at isa? port 0x384 # SoundForte RadioLink SF16-FMR2 FM Radio Card
# PCI radio devices
#gtp* at pci? dev ? function ? # Guillemot Maxi Radio FM 2000 Radio Card
# Radio support
#radio* at az?
#radio* at gtp?
#radio* at rt?
#radio* at rtii?
#radio* at sf2r?
# TV cards
# Brooktree 848/849/878/879 based TV cards
##bktr* at pci? dev ? function ?
#radio* at bktr?
# Mice
# ISA busmice
#lms0 at isa? port 0x23c irq 5 # Logitech bus mouse
#lms1 at isa? port 0x238 irq 5
#mms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
#mms1 at isa? port 0x238 irq 5
#wsmouse* at lms? mux 0
#wsmouse* at mms? mux 0
# Joysticks
#joy* at pnpbios? index ? # Game port
# ISA Plug-and-Play joysticks
#joy* at isapnp? # Game ports (usually on audio cards)
# PCI joysticks
joy* at pci? # Game ports (usually on audio cards)
#joy* at eso? # ESS Solo-1 on-board joystick
# ISA joysticks. Probe is a little strange; add only if you have one.
#joy0 at isa? port 0x201
# Miscellaneous Devices
# Planetconnect Satellite receiver driver.
#satlink0 at isa? port 0x300 drq 1
# Middle Digital, Inc. PCI-Weasel serial console board control
# devices (watchdog timer, etc.)
#weasel* at pci?
# Pseudo-Devices
# disk/mass storage pseudo-devices
pseudo-device ccd 4 # concatenated/striped disk devices
#pseudo-device cgd 4 # cryptographic disk devices
pseudo-device raid 8 # RAIDframe disk driver
options RAID_AUTOCONFIG # auto-configuration of RAID components
# Options to enable various other RAIDframe RAID types.
#options RF_INCLUDE_EVENODD=1
#options RF_INCLUDE_RAID5_RS=1
#options RF_INCLUDE_PARITYLOGGING=1
#options RF_INCLUDE_CHAINDECLUSTER=1
#options RF_INCLUDE_INTERDECLUSTER=1
#options RF_INCLUDE_PARITY_DECLUSTERING=1
#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
pseudo-device md 1 # memory disk device (ramdisk)
pseudo-device vnd 4 # disk-like interface to files
# network pseudo-devices
pseudo-device bpfilter 8 # Berkeley packet filter
pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop # network loopback
pseudo-device ppp 2 # Point-to-Point Protocol
#pseudo-device pppoe # PPP over Ethernet (RFC 2516)
pseudo-device sl 2 # Serial Line IP
#pseudo-device strip 2 # Starmode Radio IP (Metricom)
#pseudo-device irframetty # IrDA frame line discipline
pseudo-device tun 2 # network tunneling over tty
pseudo-device gre 2 # generic L3 over IP tunnel
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
pseudo-device vlan # IEEE 802.1q encapsulation
pseudo-device bridge # simple inter-network bridging
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
# miscellaneous pseudo-devices
pseudo-device pty # pseudo-terminals
#pseudo-device tb 1 # tablet line discipline
pseudo-device sequencer 1 # MIDI sequencer
# rnd works; RND_COM does not on port i386 yet.
pseudo-device rnd # /dev/random and in-kernel generator
#options RND_COM # use "com" randomness as well (BROKEN)
pseudo-device clockctl # user control of clock subsystem
# a pseudo device needed for Coda # also needs CODA (above)
#pseudo-device vcoda 4 # coda minicache <-> venus comm.
# a pseudo device needed for SMBFS
pseudo-device nsmb # experimental - SMB requester
# wscons pseudo-devices
pseudo-device wsmux # mouse & keyboard multiplexor
pseudo-device wsfont
pseudo-device ksyms # /dev/ksyms