This message is in MIME format.  The first part should be readable text,
  while the remaining parts are likely unreadable without MIME-aware tools.
  Send mail to mime@docserver.cac.washington.edu for more info.

--Boundary_(ID_0k/o+ox3Zck7sWXLiH1piw)
Content-id: <Pine.NEB.4.53.0306111602311.1422@sorrow.ashke.com>
Content-type: TEXT/PLAIN; CHARSET=US-ASCII
Content-transfer-encoding: 7BIT


> > with both my Yamaha-754 sound card and SB Live!  In both cases, the
> > card is detected and the driver loads.  Audio works fine (mpg321 & esd
> > are all I've tested so far).  However, aumix and mixerctl both
> > complain that /dev/mixer0 is not configured.
> >
> > I've checked in the -current archives but haven't come across anything
> > helpful.  Am I doing something wrong?  Is this a bug with the audio

> could you dmesg?

> possibly mixer just isn't configured or not defined at all in your
> kernel config

I've attached the dmesg...  I'm confused by "not defined at all in your
kernel config" though since, as far as I can see, there are no references
to "mixer" in any of the files under /usr/src/sys/arch/i386/conf.

Adam

--Boundary_(ID_0k/o+ox3Zck7sWXLiH1piw)
Content-id: <Pine.NEB.4.53.0306111559010.3790@sorrow.ashke.com>
Content-type: TEXT/PLAIN; CHARSET=US-ASCII; NAME=dmesg
Content-transfer-encoding: 7BIT
Content-disposition: ATTACHMENT; FILENAME=dmesg
Content-description:

NetBSD 1.6T (SORROW) #3: Wed Jun 11 05:39:56 EDT 2003
	root@sorrow:/usr/src/sys/arch/i386/compile/SORROW
total memory = 511 MB
avail memory = 470 MB
using 6144 buffers containing 26292 KB of memory
BIOS32 rev. 0 found at 0xfb460
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 1002.34 MHz, id 0x68a
cpu0: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu0: features 387fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 256 KB 32b/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: serial number 0000-068A-0003-256E-96A0-EC2F
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT82C691 (Apollo Pro) Host-PCI (rev. 0xc4)
agp0 at pchb0: aperture at 0xf0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3) CPU-AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Radeon 8500/8500LE (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x40)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C686A (Apollo KX133) ATA100 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
atapibus0 at pciide0 channel 0: 2 targets
cd0 at atapibus0 drive 1: <CREATIVE DVD-ROM DVD6240E, , 0101> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
wd0 at pciide0 channel 0 drive 0: <Maxtor 5T040H4>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 39083 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 80043264 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
cd0(pciide0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
wd1 at pciide0 channel 1 drive 0: <Maxtor 6Y120L0>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 114 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 240121728 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
pciide0: secondary channel interrupting at irq 15
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x1a)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x1a)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viapm0 at pci0 dev 7 function 4
viaenv0 at viapm0
fxp0 at pci0 dev 8 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:d0:b7:90:6c:3e
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0 at pci0 dev 9 function 0
ahc0: interrupting at irq 11
ahc0: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
bktr0 at pci0 dev 10 function 0
bktr0: interrupting at irq 11
bktr0: Hauppauge Model 44801 D126
bktr0: Hauppauge WinCast/TV, Philips NTSC tuner.
Brooktree Bt878 Video Capture (Audio Section) (miscellaneous multimedia, revision 0x11) at pci0 dev 10 function 1 not configured
emuxki0 at pci0 dev 11 function 0: Creative Labs SBLive! EMU 10000 (audio multimedia, revision 0x05)
emuxki0: interrupting at irq 5
emuxki0: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emuxki0: full duplex, mmap, independent
joy0 at pci0 dev 11 function 1: Creative Labs PCI Gameport Joystick (rev 0x05)
joy0: joystick not connected
rtk0 at pci0 dev 12 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 10
rtk0: Ethernet address 00:50:bf:72:fa:5a
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
uhub2 at uhub0 port 2
uhub2: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub2: 4 ports with 4 removable, self powered
sd0 at scsibus0 target 0 lun 0: <QUANTUM, ATLAS_V__9_WLS, 0230> disk fixed
sd0: 8755 MB, 20907 cyl, 2 head, 428 sec, 512 bytes/sect x 17930694 sectors
sd0: sync (12.50ns offset 63), 16-bit (160.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 4 lun 0: <QUANTUM, ATLAS_V__9_WLS, 0230> disk fixed
sd1: 8755 MB, 20907 cyl, 2 head, 428 sec, 512 bytes/sect x 17930694 sectors
sd1: sync (12.50ns offset 63), 16-bit (160.000MB/s) transfers, tagged queueing
cd1 at scsibus0 target 6 lun 0: <HP, CD-Writer+ 9600, 1.0a> cdrom removable
cd1: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers
sd0: no disk label
sd1: no disk label
sd0: no disk label
sd1: no disk label
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
sd0: no disk label
cd0(pciide0:0:1):  Check Condition on CDB: 0x28 00 00 00 00 00 00 00 01 00
    SENSE KEY:  Illegal Request
                Incorrect Length Indicator Set
     ASC/ASCQ:  Illegal Mode For This Track

cd0: dos partition I/O error

--Boundary_(ID_0k/o+ox3Zck7sWXLiH1piw)--