I ordered a 'hardware' internal modem, and received a PCI card
	"Conexant Systems HW 56K Fax Modem". It comes with drivers for
	win9x and 3.1 which is vaguely hopeful.

	Is this likely to be a 'puc' device, something else useful, or
	a winmodem by any other name?

	PCI_CONFIG_DUMP follows...

Conexant Systems HW 56K Fax Modem (miscellaneous communications, revision 0x08)
at pci0 dev 16 function 0: PCI configuration registers:
  Common header:
    0x00: 0x108514f1 0x02900107 0x07800008 0x00002000

    Vendor Name: Conexant Systems (0x14f1)
    Device Name: HW 56K Fax Modem (0x1085)
    Command register: 0x0107
      I/O space accesses: on
      Memory space accesses: on
      Bus mastering: on
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): on
      Fast back-to-back transactions: off
    Status register: 0x0290
      Capability List support: on
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: on
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: communications (0x07)
    Subclass Name: miscellaneous (0x80)
    Interface: 0x00
    Revision ID: 0x08
    BIST: 0x00
    Header Type: 0x00 (0x00)
    Latency Timer: 0x20
    Cache Line Size: 0x00

  Type 0 ("normal" device) header:
    0x10: 0xfe100000 0x0000ccd9 0x00000000 0x00000000
    0x20: 0x00000000 0x00000000 0x00001001 0x108514f1
    0x30: 0x00000000 0x00000040 0x00000000 0x0000010b

    Base address register at 0x10
      type: 32-bit nonprefetchable memory
      base: 0xfe100000, size: 0x00010000
    Base address register at 0x14
      type: i/o
      base: 0x0000ccd8, size: 0x00000008
    Base address register at 0x18
      not implemented(?)
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      not implemented(?)
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00001001
    Subsystem vendor ID: 0x14f1
    Subsystem ID: 0x1085
    Expansion ROM Base Address: 0x00000000
    Capability list pointer: 0x40
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x00
    Minimum Grant: 0x00
    Interrupt pin: 0x01 (pin A)
    Interrupt line: 0x0b
    Capability register at 0x40
      type: 0x01 (Power Management, rev. 1.0)

  Device-dependent header:
    0x40: 0xfe220001 0x00000000 0x00000000 0x00000000
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x00000000 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x00000000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000000 0x00000000

    Don't know how to pretty-print device-dependent header.

Conexant Systems HW 56K Fax Modem (miscellaneous communications, revision 0x08)
at pci0 dev 16 function 0 (tag 0x80008000, intrtag 0x80008000, intrswiz 0, intrp
in 0x1, i/o on, mem on, no quirks) not configured


-- 
		David/absolute		abs@formula1.com