This is a multi-part message in MIME format.
--------------090603020504010005080100
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

yannick montulet wrote:

>Hi,
>
>it says it all, version 0.3 of the Emu10k1 is available at
>http://www.epita.fr/~montul_y/
>
>Feel free to send comments and to report bugs.
>
>Yannick MONTULET.
>
Hi,
I don't know how up-to-date this snippet from the readme is:

<snip>
Be aware that this driver has only be tested on 3 configs, and therefore
might cause kernel panics.
<snip>

If this is the case then make that 4 configs and I'm happy to report 
that so far (admittedly after only a few hours actual use) no kernel panics.

If you need any help testing let me know, I can't promise you I'll have 
a lot of time available but when I do I'd be glad to help out.

I've attached dmesg of my config

(SB Live! value on NetBSD-1.5.1)

Rob



--------------090603020504010005080100
Content-Type: text/plain;
 name="dmesg.out"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.out"

NetBSD 1.5.1 (ZILA) #3: Thu Sep 27 18:23:56 CEST 2001
    rob@zila:/usr/tmp/src/sys/arch/i386/compile/ZILA
cpu0: AMD Athlon Model 4 (Thunderbird) (686-class), 1000.12 MHz
total memory = 255 MB
avail memory = 233 MB
using 3296 buffers containing 13184 KB of memory
BIOS32 rev. 0 found at 0xfb4b0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0305 (rev. 0x03)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0x8305 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Matrox MGA G400 AGP (rev. 0x05)
wsdisplay0 at vga0: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x40)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C686A (Apollo KX133) ATA100 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <Maxtor 5T020H2>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 19541 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 40021632 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
pciide0: disabling secondary channel (no drives)
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x16)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x16)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viapm0 at pci0 dev 7 function 4
Creative Labs SBLive! EMU 10000 (audio multimedia, revision 0x08) at pci0 dev 9 function 0 not configured
Creative Labs PCI Gameport Joystick (miscellaneous input, revision 0x08) at pci0 dev 9 function 1 not configured
ncr0 at pci0 dev 11 function 0: ncr 53c875 fast20 wide scsi
ncr0: interrupting at irq 11
ncr0: minsync=12, maxsync=137, maxoffs=16, 128 dwords burst, large dma fifo
ncr0: single-ended, open drain IRQ driver, using on-chip SRAM
ncr0: restart (scsi reset).
scsibus0 at ncr0: 16 targets, 8 luns per target
ex0 at pci0 dev 15 function 0: 3Com 3c900B-TPO Ethernet (rev. 0x4)
ex0: interrupting at irq 5
ex0: MAC address 00:50:da:11:bd:5b
ex0: 10baseT, 10baseT-FDX, default 10baseT
ex1 at pci0 dev 17 function 0: 3Com 3c900-TPO Ethernet (rev. 0x0)
ex1: interrupting at irq 10
ex1: MAC address 00:60:97:33:06:78
ex1: 10baseT, 10baseT-FDX, default 10baseT
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
viaenv0 at viapm0
biomask eb45 netmask ef65 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST39140N, 1498> SCSI2 0/direct fixed
sd0(ncr0:0:0): 20.0 MB/s (50 ns, offset 15)
sd0: 8683 MB, 9006 cyl, 8 head, 246 sec, 512 bytes/sect x 17783240 sectors
sd1 at scsibus0 target 1 lun 0: <SEAGATE, ST32272N, 0784> SCSI2 0/direct fixed
sd1(ncr0:1:0): 20.0 MB/s (50 ns, offset 15)
sd1: 2157 MB, 6300 cyl, 4 head, 175 sec, 512 bytes/sect x 4419464 sectors
sd2 at scsibus0 target 2 lun 0: <SEAGATE, ST32272N, 0784> SCSI2 0/direct fixed
sd2(ncr0:2:0): 20.0 MB/s (50 ns, offset 15)
sd2: 2157 MB, 6300 cyl, 4 head, 175 sec, 512 bytes/sect x 4419464 sectors
cd0 at scsibus0 target 4 lun 0: <PLEXTOR, CD-R   PX-R412C, 1.07> SCSI2 5/cdrom removable
probe(ncr0:4:1): 5.0 MB/s (200 ns, offset 8)
cd1 at scsibus0 target 6 lun 0: <PIONEER, CD-ROM DR-U06S, 1.04> SCSI2 5/cdrom removable
probe(ncr0:6:1): 16.0 MB/s (62 ns, offset 16)
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
RAID autoconfigure
Configuring raid0:
RAIDFRAME: protectedSectors is 64
RAIDFRAME: Configure (RAID Level 5): total number of sectors is 8838784 (4315 MB)
RAIDFRAME(RAID Level 5): Using 20 floating recon bufs with head sep limit 10
Microsoft SideWinder Joystick, class 0/0, rev 1.10/1.01, addr 2, uhub0 port 2 not configured
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
IP Filter: v3.4.9 initialized.  Default = pass all, Logging = enabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
sblive0 at pci0: Creative Labs SBLive! EMU 10000 (audio multimedia, revision 0x08), i/o dc00-dc1f, interrupting at irq 9
sblive0: TriTech unknown codec; no 3D stereo
audio0 at sblive0: full duplex, mmap, independent

--------------090603020504010005080100--