Subject: ahc: unable to map registers
To: None <current-users@NetBSD.ORG>
From: Michael K. Sanders <msanders@confusion.net>
List: current-users
Date: 09/11/2001 01:01:21
This Adaptec 3944UW is not happy, any ideas?  It seems odd (to me, at
least) that it's the only thing at pci2 (even after swapping slots with
the Symbios card that's siop1-3).

NetBSD 1.5X (CONCEIT) #15: Tue Sep 11 00:46:04 UTC 2001
    msanders@paranoia.confusion.net:/usr/src/sys/arch/i386/compile/CONCEIT
cpu0: Intel Pentium II (Klamath) (686-class), 299.55 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 512 KB 32b/line 4-way
cpu0: features 80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 80f9ff<PGE,MCA,CMOV,MMX>
total memory = 319 MB
avail memory = 292 MB
using 4116 buffers containing 16464 KB of memory
BIOS32 rev. 0 found at 0xf0000
PCI BIOS rev. 2.1 found at 0xf0070
pcibios: config mechanism [1][x], special cycles [1][x], last bus 2
PCI BIOS has 9 Interrupt Routing table entries
pci_intr_fixup: no compatible PCI ICU found
Warning: unable to fix up PCI interrupt routing
PCI fixup examining 1166:05
PCI fixup examining 1013:a0
PCI fixup examining 1000:0f
PCI fixup examining e11:01
PCI fixup examining 1166:05
PCI bus #0 is the last bus
[System BIOS Setting]-----------------------
  device vendor product
  register space address    size
--------------------------------------------
000:00:0 0x1166 0x0005 
		[OK]
000:06:0 0x1013 0x00a0 
	10h mem  0xc5000000 0x01000000
		[OK]
000:08:0 0x1000 0x000f 
	10h port 0x00006000 0x00000100
	14h mem  0xc6dfef00 0x00000100
	18h mem  0xc6dff000 0x00001000
		[OK]
000:15:0 0x0e11 0x0001 
		[OK]
000:17:0 0x1166 0x0005 
		[OK]
--------------------------[  0 devices bogus]
 Physical memory end: 0x13ff0000
 PCI memory mapped I/O space start: 0x14000000
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: ServerWorks PCIHB5 (rev. 0x03)
vga1 at pci0 dev 6 function 0: Cirrus Logic CL-GD5430 (rev. 0x22)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-3 added (80x25, vt100 emulation)
siop0 at pci0 dev 8 function 0: Symbios Logic 53c875 (ultra-wide scsi)
siop0: using on-board RAM
siop0: interrupting at irq 5
scsibus0 at siop0: 16 targets, 8 luns per target
Compaq PCI-EISA Bridge (EISA bridge, revision 0x07) at pci0 dev 15 function 0 not configured
pchb1 at pci0 dev 17 function 0
pchb1: ServerWorks PCIHB5 (rev. 0x03)
pci1 at pchb1 bus 1
pci1: memory space enabled
tl0 at pci1 dev 7 function 0
tl0: Compaq ProLiant Integrated Netelligent 10/100 TX
tl0: Ethernet address 00:80:5f:c7:49:69
tl0: interrupting at irq 9
nsphy0 at tl0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
OUI 0x080028 model 0x0001 rev 5 at tl0 phy 31 not configured
siop1 at pci1 dev 9 function 0: Symbios Logic 53c875 (ultra-wide scsi)
siop1: using on-board RAM
siop1: interrupting at irq 10
scsibus1 at siop1: 16 targets, 8 luns per target
ppb0 at pci1 dev 10 function 0: Digital Equipment DECchip 21050 PCI-PCI Bridge (rev. 0x02)
pci2 at ppb0 bus 2
pci2: memory space enabled
ahc0 at pci2 dev 4 function 0: unable to map registers
ahc1 at pci2 dev 5 function 0: unable to map registers
siop2 at pci1 dev 11 function 0: Symbios Logic 53c875 (ultra-wide scsi)
siop2: using on-board RAM
siop2: interrupting at irq 11
scsibus2 at siop2: 16 targets, 8 luns per target
siop3 at pci1 dev 11 function 1: Symbios Logic 53c875 (ultra-wide scsi)
siop3: using on-board RAM
siop3: interrupting at irq 11
scsibus3 at siop3: 16 targets, 8 luns per target
eisa0 at mainbus0
eisa0: can't map I/O space for slot 6
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsprobe: reset error 5
pmsiprobe: reset error 5
lptprobe: mask ff data 55 failed
lptprobe: mask ff data 55 failed
lpt2 at isa0 port 0x3bc-0x3bf: polled
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask fde5 netmask ffe5 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
siop0: alloc newcdb at PHY addr 0x1b8d000
sd0 at scsibus0 target 0 lun 0: <COMPAQ, DCHS04Y, 5555> SCSI2 0/direct fixed
sd0: 4094 MB, 6077 cyl, 9 head, 153 sec, 512 bytes/sect x 8386000 sectors
sd0: sync (50.0ns offset 15), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <COMPAQ, DGHS18Y, 01C0> SCSI3 0/direct fixed
sd1: 17366 MB, 8154 cyl, 20 head, 218 sec, 512 bytes/sect x 35566000 sectors
sd1: sync (50.0ns offset 15), 16-bit (40.000MB/s) transfers, tagged queueing
sd2 at scsibus0 target 2 lun 0: <COMPAQ, DGHS18Y, 01C0> SCSI3 0/direct fixed
sd2: 17366 MB, 8154 cyl, 20 head, 218 sec, 512 bytes/sect x 35566000 sectors
sd2: sync (50.0ns offset 15), 16-bit (40.000MB/s) transfers, tagged queueing
scsibus1: waiting 2 seconds for devices to settle...
siop1: alloc newcdb at PHY addr 0x1b8e000
scsibus2: waiting 2 seconds for devices to settle...
siop2: alloc newcdb at PHY addr 0x1b8f000
scsibus3: waiting 2 seconds for devices to settle...
siop3: alloc newcdb at PHY addr 0x1b90000
raidattach: Asked for 4 units
Kernelized RAIDframe activated
findroot: can't open dev sd1a (6)
findroot: can't open dev sd2a (6)
boot device: sd0
root on sd0a dumps on sd0b
init: copying out path `/sbin/init' 11
RAIDFRAME: protectedSectors is 64
raid0: Summary of serial numbers:
100 2
raid0: Summary of mod counters:
399228 2
raid0: Component /dev/sd1e being configured at row: 0 col: 0
         Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
         Version: 2 Serial Number: 100 Mod Counter: 399228
         Clean: Yes Status: 0
raid0: Component /dev/sd2e being configured at row: 0 col: 1
         Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
         Version: 2 Serial Number: 100 Mod Counter: 399228
         Clean: Yes Status: 0
RAIDFRAME: Configure (RAID Level 0): total number of sectors is 3556352 (1736 MB)
RAIDFRAME(RAID Level 0): Using 6 floating recon bufs with no head sep limit
raid1: Summary of serial numbers:
101 2
raid1: Summary of mod counters:
1024905830 2
raid1: Component /dev/sd1f being configured at row: 0 col: 0
         Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
         Version: 2 Serial Number: 101 Mod Counter: 1024905830
         Clean: Yes Status: 0
raid1: Component /dev/sd2f being configured at row: 0 col: 1
         Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
         Version: 2 Serial Number: 101 Mod Counter: 1024905830
         Clean: Yes Status: 0
RAIDFRAME: Configure (RAID Level 0): total number of sectors is 67575168 (32995 MB)
RAIDFRAME(RAID Level 0): Using 6 floating recon bufs with no head sep limit
siop0: alloc newcdb at PHY addr 0x1bd7000
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0