I know this worked before, but lately my machine will never wake up from
suspend properly. I can hear it powering up, the hard disk LED lights up,
and the display never powers on. The machine is locked at this point.

I tried playing with APM_DISABLE_INTERRUPTS, and that had no effect. My
dmesg output is below.

Thanks,
Jared


NetBSD 1.5W (MOON) #0: Sun Jul  1 18:01:03 ADT 2001
    jmcneill@moon.invisible.ca:/usr/src/sys/arch/i386/compile/MOON
cpu0: Intel 486DX4 (486-class)
cpu0: features 3<FPU,VME>
total memory = 16000 KB
avail memory = 12892 KB
using 225 buffers containing 900 KB of memory
mainbus0 (root)
isa0 at mainbus0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 channel 0 drive 0: <IBM-DPRA-21215>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 1160 MB, 2358 cyl, 16 head, 63 sec, 512 bytes/sect x 2376864 sectors
wd0: drive supports PIO mode 3, DMA mode 1
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0: console (80x25, vt100 emulation), using wskbd0
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff
pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcic1 at isa0 port 0x3e4-0x3e5 iomem 0xe0000-0xe3fff
pcic1: controller 0 (Intel 82365SL Revision 1) has no sockets
pcic1: controller 1 (Intel 82365SL Revision 1) has socket A only
pcmcia1 at pcic1 controller 1 socket 0
apm0 at mainbus0: Power Management spec V1.1
biomask effd netmask effd ttymask ffff
pcic0: controller 0 detecting irqs with mask 0xdeb8:..3..4..5..7..9..10..11..15
pcic0: using irq 3 for socket events
pcic1: controller 1 detecting irqs with mask 0xdeb8:..4..5..7..9..10..11..15
pcic1: using irq 4 for socket events
esl0 at pcmcia0 function 0ne0 at pcmcia1 function 0 port 0x220-0x22f: EigerLabs EPX-A2000 Audio
pcmcia0: card irq 5
esl0: ESS AudioDrive 1688 [version 0x688b]
audio0 at esl0: half duplex, mmap
opl0 at esl0: model OPL3
midi0 at opl0: ESS AudioDrive Yamaha OPL3
 port 0x400-0x40f port 0x410-0x41f
ne0: SVEC/Hawking Tech. Combo Card Ethernet
ne0: Ethernet address 00:e0:98:1d:32:03
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
pcmcia1: card irq 7
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0