Subject: Couldn't run XFree86 4.1.0 on C&T65555
To: 'xfree86@xfree86.org' <xfree86@xfree86.org>
From: Ciarcinski, Adam \(ISS Brussels\) <ACiarcinski@iss.net>
List: current-users
Date: 06/20/2001 07:40:52
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_000_01C0F97D.DC1EFB20
Content-Type: text/plain

Hi,

I have recompiled XFree86 4.1.0 on NetBSD-current (1.5W) running on
Toshiba Tecra 530CDT, and X-server fails with 'Caught signal 10'.
Everything was okay with 4.0.x versions.  I have tried gcc-2.95.3
and egcs-1.1.2, also with -march=pentium.  I have tried different
config files and options for Chips&Technology 65555.  The same
binaries work fine on Toshiba Tecra 8000 with NeoMagic chipset.
Log attached.
Please help.
Thanks :)

	kind regards

		- Adam


------_=_NextPart_000_01C0F97D.DC1EFB20
Content-Type: application/octet-stream;
	name="XFree86.0.log"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="XFree86.0.log"

=0A=
XFree86 Version 4.1.0 / X Window System=0A=
(protocol Version 11, revision 0, vendor release 6510)=0A=
Release Date: 2 June 2001=0A=
	If the server is older than 6-12 months, or if your card is=0A=
	newer than the above date, look for a newer version before=0A=
	reporting problems.  (See http://www.XFree86.Org/FAQ)=0A=
Build Operating System: NetBSD/i386 1.5W [ELF] The NetBSD Foundation, =
Inc.=0A=
Module Loader present=0A=
(=3D=3D) Log file: "/var/log/XFree86.0.log", Time: Fri Jun 15 15:49:20 =
2001=0A=
(=3D=3D) Using config file: "/etc/X11/XF86Config"=0A=
Markers: (--) probed, (**) from config file, (=3D=3D) default =
setting,=0A=
         (++) from command line, (!!) notice, (II) informational,=0A=
         (WW) warning, (EE) error, (NI) not implemented, (??) =
unknown.=0A=
(=3D=3D) ServerLayout "Simple Layout"=0A=
(**) |-->Screen "Screen 1" (0)=0A=
(**) |   |-->Monitor "My Monitor"=0A=
(**) |   |-->Device "Chips & Technologies CT65555"=0A=
(**) |-->Input Device "Mouse1"=0A=
(**) |-->Input Device "Keyboard1"=0A=
(**) Option "AutoRepeat" "500 30"=0A=
(**) Option "XkbRules" "xfree86"=0A=
(**) XKB: rules: "xfree86"=0A=
(**) Option "XkbModel" "pc105"=0A=
(**) XKB: model: "pc105"=0A=
(**) Option "XkbLayout" "pl"=0A=
(**) XKB: layout: "pl"=0A=
(=3D=3D) Keyboard: CustomKeycode disabled=0A=
(**) FontPath set to =
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11=
R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscal=
ed,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr=
/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/=
lib/X11/fonts/latin2/75dpi/,/usr/X11R6/lib/X11/fonts/latin2/100dpi/,/usr=
/X11R6/lib/X11/fonts/freefont/,/usr/X11R6/lib/X11/fonts/intlfonts/"=0A=
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"=0A=
(=3D=3D) ModulePath set to "/usr/X11R6/lib/modules"=0A=
(II) xf86ReadBIOS(f8000, e80, Buf, 2)-> 50 0f dc d6...=0A=
(--) Using pcvt driver (version 3.32)=0A=
(II) Module ABI versions:=0A=
	XFree86 ANSI C Emulation: 0.1=0A=
	XFree86 Video Driver: 0.4=0A=
	XFree86 XInput driver : 0.2=0A=
	XFree86 Server Extension : 0.1=0A=
	XFree86 Font Renderer : 0.2=0A=
(II) Loader running on netbsd=0A=
(II) LoadModule: "bitmap"=0A=
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a=0A=
(II) Module bitmap: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 1.0.0=0A=
	Module class: XFree86 Font Renderer=0A=
	ABI class: XFree86 Font Renderer, version 0.2=0A=
(II) Loading font Bitmap=0A=
(II) LoadModule: "pcidata"=0A=
(II) Loading /usr/X11R6/lib/modules/libpcidata.a=0A=
(II) Module pcidata: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 0.1.0=0A=
	ABI class: XFree86 Video Driver, version 0.4=0A=
(II) PCI: Probing config type using method 1=0A=
(II) PCI: Config type is 1=0A=
(II) PCI: stages =3D 0x03, oldVal1 =3D 0x00000000, mode1Res1 =3D =
0x80000000=0A=
(II) PCI: PCI scan (all values are in hex)=0A=
(II) PCI: 00:00:0: chip 1179,0601 card 0000,0000 rev 26 class 06,00,00 =
hdr 00=0A=
(II) PCI: 00:04:0: chip 102c,00e5 card 0000,0000 rev c3 class 03,00,00 =
hdr 00=0A=
(II) PCI: 00:0b:0: chip 1033,0035 card 0000,0000 rev 01 class 0c,03,10 =
hdr 00=0A=
(II) PCI: End of PCI scan=0A=
(II) LoadModule: "scanpci"=0A=
(II) Loading /usr/X11R6/lib/modules/libscanpci.a=0A=
(II) Module scanpci: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 0.1.0=0A=
	ABI class: XFree86 Video Driver, version 0.4=0A=
(II) UnloadModule: "scanpci"=0A=
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a=0A=
(II) Host-to-PCI bridge:=0A=
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is =
set)=0A=
(II) Bus 0 I/O range:=0A=
	[0] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]=0A=
(II) Bus 0 non-prefetchable memory range:=0A=
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]=0A=
(II) Bus 0 prefetchable memory range:=0A=
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]=0A=
(--) PCI:*(0:4:0) C&T 65555 rev 195, Mem @ 0xfe000000/24=0A=
(II) Addressable bus resource ranges are=0A=
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]=0A=
	[1] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]=0A=
(II) OS-reported resource ranges:=0A=
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A=
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A=
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]=0A=
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]=0A=
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A=
	[5] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]=0A=
	[6] -1	0x00000000 - 0x000000ff (0x100) IX[B]=0A=
(II) Active PCI resource ranges:=0A=
	[0] -1	0xfdfff000 - 0xfdffffff (0x1000) MX[B]E=0A=
	[1] -1	0xfe000000 - 0xfeffffff (0x1000000) MX[B](B)=0A=
(II) Active PCI resource ranges after removing overlaps:=0A=
	[0] -1	0xfdfff000 - 0xfdffffff (0x1000) MX[B]E=0A=
	[1] -1	0xfe000000 - 0xfeffffff (0x1000000) MX[B](B)=0A=
(II) OS-reported resource ranges after removing overlaps with PCI:=0A=
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A=
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A=
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]=0A=
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]=0A=
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A=
	[5] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]=0A=
	[6] -1	0x00000000 - 0x000000ff (0x100) IX[B]=0A=
(II) All system resource ranges:=0A=
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A=
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A=
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]=0A=
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]=0A=
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A=
	[5] -1	0xfdfff000 - 0xfdffffff (0x1000) MX[B]E=0A=
	[6] -1	0xfe000000 - 0xfeffffff (0x1000000) MX[B](B)=0A=
	[7] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]=0A=
	[8] -1	0x00000000 - 0x000000ff (0x100) IX[B]=0A=
(II) LoadModule: "dbe"=0A=
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a=0A=
(II) Module dbe: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 1.0.0=0A=
	Module class: XFree86 Server Extension=0A=
	ABI class: XFree86 Server Extension, version 0.1=0A=
(II) Loading extension DOUBLE-BUFFER=0A=
(II) LoadModule: "extmod"=0A=
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a=0A=
(II) Module extmod: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 1.0.0=0A=
	Module class: XFree86 Server Extension=0A=
	ABI class: XFree86 Server Extension, version 0.1=0A=
(II) Loading extension SHAPE=0A=
(II) Loading extension MIT-SUNDRY-NONSTANDARD=0A=
(II) Loading extension BIG-REQUESTS=0A=
(II) Loading extension SYNC=0A=
(II) Loading extension MIT-SCREEN-SAVER=0A=
(II) Loading extension XC-MISC=0A=
(II) Loading extension XFree86-VidModeExtension=0A=
(II) Loading extension XFree86-Misc=0A=
(II) Loading extension DPMS=0A=
(II) Loading extension FontCache=0A=
(II) Loading extension TOG-CUP=0A=
(II) Loading extension Extended-Visual-Information=0A=
(II) Loading extension XVideo=0A=
(II) Loading extension XVideo-MotionCompensation=0A=
(II) LoadModule: "type1"=0A=
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a=0A=
(II) Module type1: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 1.0.0=0A=
	Module class: XFree86 Font Renderer=0A=
	ABI class: XFree86 Font Renderer, version 0.2=0A=
(II) Loading font Type1=0A=
(II) Loading font CID=0A=
(II) LoadModule: "freetype"=0A=
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a=0A=
(II) Module freetype: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 1.1.9=0A=
	Module class: XFree86 Font Renderer=0A=
	ABI class: XFree86 Font Renderer, version 0.2=0A=
(II) Loading font FreeType=0A=
(II) LoadModule: "chips"=0A=
(II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o=0A=
(II) Module chips: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 1.0.0=0A=
	Module class: XFree86 Video Driver=0A=
	ABI class: XFree86 Video Driver, version 0.4=0A=
(II) LoadModule: "mouse"=0A=
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o=0A=
(II) Module mouse: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 1.0.0=0A=
	Module class: XFree86 XInput Driver=0A=
	ABI class: XFree86 XInput driver, version 0.2=0A=
(II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, =
ct65525,=0A=
	ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,=0A=
	ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300=0A=
(II) Primary Device is: PCI 00:04:0=0A=
(--) Assigning device section with no busID to primary device=0A=
(--) Chipset ct65555 found=0A=
(II) resource ranges after xf86ClaimFixedResources() call:=0A=
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A=
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A=
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]=0A=
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]=0A=
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A=
	[5] -1	0xfdfff000 - 0xfdffffff (0x1000) MX[B]E=0A=
	[6] -1	0xfe000000 - 0xfeffffff (0x1000000) MX[B](B)=0A=
	[7] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]=0A=
	[8] -1	0x00000000 - 0x000000ff (0x100) IX[B]=0A=
(II) resource ranges after probing:=0A=
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A=
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A=
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]=0A=
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]=0A=
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A=
	[5] -1	0xfdfff000 - 0xfdffffff (0x1000) MX[B]E=0A=
	[6] -1	0xfe000000 - 0xfeffffff (0x1000000) MX[B](B)=0A=
	[7] 0	0x000a0000 - 0x000affff (0x10000) MS[B]=0A=
	[8] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B]=0A=
	[9] 0	0x000b8000 - 0x000bffff (0x8000) MS[B]=0A=
	[10] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]=0A=
	[11] -1	0x00000000 - 0x000000ff (0x100) IX[B]=0A=
	[12] 0	0x000003b0 - 0x000003bb (0xc) IS[B]=0A=
	[13] 0	0x000003c0 - 0x000003df (0x20) IS[B]=0A=
(II) Setting vga for screen 0.=0A=
(II) Loading sub module "vgahw"=0A=
(II) LoadModule: "vgahw"=0A=
(II) Loading /usr/X11R6/lib/modules/libvgahw.a=0A=
(II) Module vgahw: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 0.1.0=0A=
	ABI class: XFree86 Video Driver, version 0.4=0A=
(II) Loading sub module "vbe"=0A=
(II) LoadModule: "vbe"=0A=
(II) Loading /usr/X11R6/lib/modules/libvbe.a=0A=
(II) Module vbe: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 1.0.0=0A=
	ABI class: XFree86 Video Driver, version 0.4=0A=
(II) Loading sub module "int10"=0A=
(II) LoadModule: "int10"=0A=
(II) Loading /usr/X11R6/lib/modules/libint10.a=0A=
(II) Module int10: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 1.0.0=0A=
	ABI class: XFree86 Video Driver, version 0.4=0A=
(II) CHIPS(0): initializing int10=0A=
(II) xf86ReadBIOS(0, 0, Buf, 600)-> 6f ef 00 f0...=0A=
(II) xf86ReadBIOS(c0000, 0, Buf, 10000)-> ff ff ff ff...=0A=
(II) xf86ReadBIOS(d0000, 0, Buf, 10000)-> 41 00 80 00...=0A=
(II) xf86ReadBIOS(e0000, 0, Buf, 10000)-> ff ff ff ff...=0A=
(II) CHIPS(0): Primary V_BIOS segment is: 0xe400=0A=
(II) CHIPS(0): VESA BIOS detected=0A=
(II) CHIPS(0): VESA VBE Version 2.0=0A=
(II) CHIPS(0): VESA VBE Total Mem: 2048 kB=0A=
(II) CHIPS(0): VESA VBE OEM: CHIPS 6x555 Super VGA=0A=
(II) CHIPS(0): VESA VBE OEM Software Rev: 1.0=0A=
(II) CHIPS(0): VESA VBE OEM Vendor: Chips & Technologies, Inc.=0A=
(II) CHIPS(0): VESA VBE OEM Product: 6x555 Display Controller=0A=
(II) CHIPS(0): VESA VBE OEM Product Rev: 2=0A=
(**) CHIPS(0): Depth 16, (--) framebuffer bpp 16=0A=
(=3D=3D) CHIPS(0): RGB weight 565=0A=
(=3D=3D) CHIPS(0): Default visual is TrueColor=0A=
(=3D=3D) CHIPS(0): Using gamma correction (1.0, 1.0, 1.0)=0A=
(=3D=3D) CHIPS(0): Using HW cursor=0A=
(**) CHIPS(0): Enabling linear addressing=0A=
(--) CHIPS(0): base address is set at 0xFE000000.=0A=
(**) CHIPS(0): Using MMIO=0A=
(--) CHIPS(0): VideoRAM: 2048 kByte=0A=
(--) CHIPS(0): TFT probed=0A=
(--) CHIPS(0): LCD=0A=
(--) CHIPS(0): Display Size: x=3D1024; y=3D768=0A=
(--) CHIPS(0): PCI Bus=0A=
(--) CHIPS(0): Internal DAC disabled=0A=
(--) CHIPS(0): Using programmable clocks=0A=
(--) CHIPS(0): Dot clock 0:  25.172 MHz=0A=
(--) CHIPS(0): Dot clock 1:  28.325 MHz CRTclk=0A=
(--) CHIPS(0): Dot clock 2:  65.082 MHz FPclk=0A=
(--) CHIPS(0): Probed memory clock of  50.113 MHz=0A=
(=3D=3D) CHIPS(0): Min pixel clock is  11.000 MHz=0A=
(--) CHIPS(0): Max pixel clock is  70.158 MHz=0A=
(II) Loading sub module "ddc"=0A=
(II) LoadModule: "ddc"=0A=
(II) Loading /usr/X11R6/lib/modules/libddc.a=0A=
(II) Module ddc: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 1.0.0=0A=
	ABI class: XFree86 Video Driver, version 0.4=0A=
(II) Loading sub module "ddc"=0A=
(II) LoadModule: "ddc"=0A=
(II) Reloading /usr/X11R6/lib/modules/libddc.a=0A=
f000:c287: 01 ILLEGAL EXTENDED X86 OPCODE!=0A=
(II) Loading sub module "i2c"=0A=
(II) LoadModule: "i2c"=0A=
(II) Loading /usr/X11R6/lib/modules/libi2c.a=0A=
(II) Module i2c: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 1.2.0=0A=
	ABI class: XFree86 Video Driver, version 0.4=0A=
(II) CHIPS(0): I2C bus "DDC" initialized.=0A=
(II) CHIPS(0): Probing for DDC1=0A=
(II) CHIPS(0): My Monitor: Using hsync range of 31.50-57.00 kHz=0A=
(II) CHIPS(0): My Monitor: Using vrefresh range of 50.00-100.00 Hz=0A=
(II) CHIPS(0): Clock range:  11.00 to  70.16 MHz=0A=
(II) CHIPS(0): Not using default mode "1024x768" (bad mode =
clock/interlace/doublescan)=0A=
(II) CHIPS(0): Not using default mode "1024x768" (bad mode =
clock/interlace/doublescan)=0A=
(II) CHIPS(0): Not using default mode "1024x768" (bad mode =
clock/interlace/doublescan)=0A=
(II) CHIPS(0): Not using default mode "1024x768" (bad mode =
clock/interlace/doublescan)=0A=
(II) CHIPS(0): Not using default mode "1152x864" (bad mode =
clock/interlace/doublescan)=0A=
(II) CHIPS(0): Not using default mode "1280x960" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1280x960" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory =
for mode)=0A=
(II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory =
for mode)=0A=
(--) CHIPS(0): Virtual size is 1024x768 (pitch 1024)=0A=
(**) CHIPS(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz=0A=
(II) CHIPS(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 =
771 777 806 -hsync -vsync=0A=
(=3D=3D) CHIPS(0): DPI set to (75, 75)=0A=
(II) Loading sub module "fb"=0A=
(II) LoadModule: "fb"=0A=
(II) Loading /usr/X11R6/lib/modules/libfb.a=0A=
(II) Module fb: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 1.0.0=0A=
	ABI class: XFree86 ANSI C Emulation, version 0.1=0A=
(II) Loading sub module "xaa"=0A=
(II) LoadModule: "xaa"=0A=
(II) Loading /usr/X11R6/lib/modules/libxaa.a=0A=
(II) Module xaa: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 1.0.0=0A=
	ABI class: XFree86 Video Driver, version 0.4=0A=
(II) Loading sub module "ramdac"=0A=
(II) LoadModule: "ramdac"=0A=
(II) Loading /usr/X11R6/lib/modules/libramdac.a=0A=
(II) Module ramdac: vendor=3D"The XFree86 Project"=0A=
	compiled for 4.1.0, module version =3D 0.1.0=0A=
	ABI class: XFree86 Video Driver, version 0.4=0A=
(II) do I need RAC?  No, I don't.=0A=
(II) resource ranges after preInit:=0A=
	[0] 0	0xfe000000 - 0xfeffffff (0x1000000) MS[B]=0A=
	[1] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A=
	[2] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A=
	[3] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]=0A=
	[4] -1	0x000c0000 - 0x000effff (0x30000) MX[B]=0A=
	[5] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A=
	[6] -1	0xfdfff000 - 0xfdffffff (0x1000) MX[B]E=0A=
	[7] -1	0xfe000000 - 0xfeffffff (0x1000000) MX[B](B)=0A=
	[8] 0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)=0A=
	[9] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)=0A=
	[10] 0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)=0A=
	[11] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]=0A=
	[12] -1	0x00000000 - 0x000000ff (0x100) IX[B]=0A=
	[13] 0	0x000003b0 - 0x000003bb (0xc) IS[B]=0A=
	[14] 0	0x000003c0 - 0x000003df (0x20) IS[B]=0A=
=0A=
Fatal server error:=0A=
Caught signal 10.  Server aborting=0A=
=0A=
=0A=
When reporting a problem related to a server crash, please send=0A=
the full server output, not just the last messages.=0A=
This can be found in the log file "/var/log/XFree86.0.log".=0A=
Please report problems to xfree86@xfree86.org.=0A=
=0A=

------_=_NextPart_000_01C0F97D.DC1EFB20--