Using cdrecord-current on 1.4ZD, I am unable to write CD's to an IDE CD-RW
drive. The command I used:
  cdrecord dev=3D/dev/rcd1d speed=3D4 -dao -data yearbook.iso

and every time it dies with 'cdrecord: Cannot open new session.'. A
complete log is below; what am I doing wrong?

Thanks,
Jared

Cdrecord 1.9a01 (i386-unknown-netbsd1.4ZD) Copyright (C) 1995-2000 J=F6rg S=
chilling
scsidev: '/dev/rcd1d'
devname: '/dev/rcd1d'
scsibus: -2 target: -2 lun: -2
Using libscg version 'schily-0.1'
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'MITSUMI '
Identifikation : 'CR-4804TE       '
Revision       : '2.2C'
Device seems to be: Philips CDD-522.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 9 seconds.=08=08=08=08=08=08=08=
=08=08=088 seconds.=08=08=08=08=08=08=08=08=08=087 seconds.=08=08=08=08=08=
=08=08=08=08=086 seconds.=08=08=08=08=08=08=08=08=08=085 seconds.=08=08=08=
=08=08=08=08=08=08=084 seconds.=08=08=08=08=08=08=08=08=08=083 seconds.=08=
=08=08=08=08=08=08=08=08=082 seconds.=08=08=08=08=08=08=08=08=08=081 second=
s.
CDB:  55 10 00 00 00 00 00 00 3C 00
status: 0x0 (GOOD STATUS)
resid: 60
cmd finished after 0.001s timeout 200s
cdrecord: Warning: using default CD write parameter data.
Mode Select Data 00 10 00 00 05 32 02 00 00 00 00 00 00 00 00 00 00 00 00 9=
6 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00 00 00 00 00 00 00 00 00 00 00
cdrecord: Cannot open new session.