Hi all,
I was wondering what was involved in getting a Dayna combo Ethernet/Modem
PC Card supported under NetBSD. The card states that it's both for Mac and
PC, so it definitely shouldn't be s/w dependent (a la winmodems). Here's
what I get when I plug it in:

cmcia1: CIS version PC Card Standard 5.0
pcmcia1: CIS info: Dayna Communications, Inc., CommuniCard Plus, A
pcmcia1: Manufacturer code 0x143, product 0xc0ab
pcmcia1: function 0: multi-function, ccr addr 3f8 mask 3
pcmcia1: function 0, config table entry 41: I/O card; irq mask 9e38; iomask
a, iospace 320 3e8; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
pcmcia1: function 0, config table entry 37: I/O card; irq mask 9e38; iomask
a, iospace 320 2f8; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
pcmcia1: function 0, config table entry 38: I/O card; irq mask 9e38; iomask
a, iospace 340 2f8; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
pcmcia1: function 0, config table entry 39: I/O card; irq mask 9e38; iomask
a, iospace 360 2f8; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
pcmcia1: function 0, config table entry 40: I/O card; irq mask 9e38; iomask
a, iospace 300 3e8; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
pcmcia1: function 0, config table entry 36: I/O card; irq mask 9e38; iomask
a, iospace 300 2f8; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
pcmcia1: function 0, config table entry 42: I/O card; irq mask 9e38; iomask
a, iospace 340 3e8; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
pcmcia1: function 0, config table entry 43: I/O card; irq mask 9e38; iomask
a, iospace 360 3e8; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
pcmcia1: function 0, config table entry 44: I/O card; irq mask 9e38; iomask
a, iospace 300 2e8; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
pcmcia1: function 0, config table entry 45: I/O card; irq mask 9e38; iomask
a, iospace 320 2e8; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
pcmcia1: function 0, config table entry 46: I/O card; irq mask 9e38; iomask
a, iospace 340 2e8; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
pcmcia1: function 0, config table entry 47: I/O card; irq mask 9e38; iomask
a, iospace 360 2e8; mwait_required rdybsy_active wp_active bvd_active io16
irqlevel
Dayna Communications, Inc., CommuniCard Plus, A (manufacturer 0x143,
product 0xc0ab) function 0 not configured


Here's what my dmesg shows for an AT&T PC card modem that I have...as you
can see, it attaches itself to com2 to be accessed as ttyC2:

pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: CIRRUS LOGIC, FAX MODEM, MD144ECP, 0-0
pcmcia0: Manufacturer code 0xffffffff, product 0xffffffff
pcmcia0: function 0: serial port, ccr addr 100 mask 3
pcmcia0: function 0, config table entry 32: I/O card; irq mask 86b8; iomask
a, iospace 3f8; audio
pcmcia0: function 0, config table entry 33: I/O card; irq mask 86b8; iomask
a, iospace 2f8; io8 audio
pcmcia0: function 0, config table entry 34: I/O card; irq mask 86b8; iomask
a, iospace 3e8; io8 audio
pcmcia0: function 0, config table entry 35: I/O card; irq mask 86b8; iomask
a, iospace 2e8; io8 audio
com2 at pcmcia0 function 0 port 0x3e8-0x3ef: serial device
com2: ns16550a, working fifo
pcmcia1 at pcic0 controller 0 socket 1



This is on a DEC AlphaStation 200 if it matters.

Thanks for any insight, or for simply telling me if multifunction cards
aren't currently close to support.

Mike
Bikers don't *DO* taglines.