What's the status on the 3C574 working with the ep driver?

I recently installed the 07041999 i386 snapshot on a new notebook
with one of these, and when trying to configure the interface get
the following message repeated until the card is pulled:

    ep1: adapter failure (2003)

I found a post from Laine Stump in the archives from back in March,
and it looks like some progress has been made since then, but the MAC
address still isn't getting set correctly.  Is anyone currently
working on this driver?  Is there anything I can do to help?

:: Mike ::

NetBSD 1.4G (GENERIC.v6) #5: Thu Jul 22 06:44:25 PDT 1999
    root@apotheosis.inktomi.com:/usr/src/current/src/sys/arch/i386/compile/GENERIC.v6
cpu0: family 6 model 6 step a
cpu0: Intel Pentium II (Celeron) (686-class)
total memory = 127 MB
avail memory = 114 MB
using 1657 buffers containing 6628 KB of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (AGP disabled) (rev. 0x03)
vga1 at pci0 dev 4 function 0: Neomagic MagicMedia 256AV VGA (rev. 0x12)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 5 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 5 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK6412MAT>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 6194MB, 13424 cyl, 15 head, 63 sec, 512 bytes/sect x 12685680 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-C2102, 5900001382, 1329> type 5 cdrom removable
cd0: 32-bits data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 5 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 11
uhci0: USB version 1.0
usb0 at uhci0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 5 function 3 not configured
fxp0 at pci0 dev 6 function 0: Intel i82557 Ethernet, rev 5
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:00:39:ba:27:10, 10/100 Mb/s
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
AT&T Microelectronics K56flex DSVD LTMODEM (miscellaneous communications, revision 0x01) at pci0 dev 7 function 0 not configured
Toshiba Info Systems (2nd PCI Vendor ID) product 0x0701 (miscellaneous communications, revision 0x23) at pci0 dev 9 function 0 not configured
Toshiba Info Systems (2nd PCI Vendor ID) ToPIC97 CardBus-PCI Bridge (CardBus bridge, revision 0x05) at pci0 dev 11 function 0 not configured
Toshiba Info Systems (2nd PCI Vendor ID) ToPIC97 CardBus-PCI Bridge (CardBus bridge, revision 0x05) at pci0 dev 11 function 1 not configured
ESS Technology Inc Maestro 2E (audio multimedia, revision 0x10) at pci0 dev 12 function 0 not configured
C-Cube Microsystems Cinemaster C 3.0 DVD Decoder (miscellaneous multimedia, revision 0x02) at pci0 dev 13 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
opms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
ep1 at pcmcia1 function 0 port 0x340-0x35f: 3Com 3c574-TX 10/100Mbps Ethernet
ep1: address 02:01:02:01:02:01, 64KB word-wide FIFO, 1:1 Rx:Tx split
isapnp0: no ISA Plug 'n Play devices found
biomask c840 netmask c840 ttymask d8ca
IPsec: Initialized Security Association Processing.
fxp0: supplying EUI64: 00:00:39:ff:fe:ba:27:10
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
fxp0: starting DAD for fe80:0001::0200:39ff:feba:2710
fxp0: DAD complete for fe80:0001::0200:39ff:feba:2710 - no duplicates found