--Plague_of_Locusts_091_000
Content-Type: TEXT/plain; charset=us-ascii
Content-MD5: i160G4MNnBOsU6F6SmTDpg==


Hello Current users,

For a few weeks now i am unable to create a correct kernel for I386-current.
What happens is: My wd0 is found, wdc1 is probed , activity lite stayes on
but my wd1 and wd2 on the second IDE port are not found.
Desperately, i made a GENERIC kernel last night (1.4_ALPHA),
it probed via pciide but also did not find wd1 and wd2..

Please respond by mail.

My current dmesg follows:

-----------------------------------------------------
Gerard J van der Grinten
Email : Gerard.vdGrinten@best.ms.philips.com or gvdg@concepts.nl
Phone : +0(031) 40 2764473


--Plague_of_Locusts_091_000
Content-Type: TEXT/plain; name=DMESG; charset=us-ascii
Content-Description: DMESG
Content-MD5: LS3BKjffOQi9xzReX6WPyQ==

NetBSD 1.3K (BIMBO) #68: Sat Mar  6 18:48:06 MET 1999
    root@bimbo:/usr/src/sys/arch/i386/compile/BIMBO
cpu0: Cyrix 6x86 (486-class)
real mem  = 66715648
avail mem = 58982400
using 840 buffers containing 3440640 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82437VX System Controller (TVX) (rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371SB PCI-to-ISA Bridge (PIIX3) (rev. 0x01)
Intel 82371SB IDE Interface (PIIX3) (IDE mass storage, interface 0x80) at pci0 dev 7 function 1 not configured
S3 86C864-0 ("Vision864") (VGA prehistoric) at pci0 dev 20 function 0 not configured
isa0 at pcib0
aha0 at isa0 port 0x330-0x333 irq 11 drq 5
aha0: model AHA-1540A/1542A/1542B, firmware 0.5
aha0: sync, parity
scsibus0 at aha0: 8 targets, 8 luns per target
st0 at scsibus0 targ 5 lun 0: <ARCHIVE, VIPER 150  21247, -005> SCSI1 1/sequential removable
st0: rogue, drive empty
st1 at scsibus0 targ 6 lun 0: <EXABYTE, EXB-8200, 2618> SCSI1 1/sequential removable
st1: drive empty
ep0 at isa0 port 0x300-0x30f irq 10: 3Com 3C509 Ethernet
ep0: address 00:20:af:dc:b3:f0, 8KB byte-wide FIFO, 1:1 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10base5)
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 channel 0 drive 0: <ST33232A>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 3077MB, 6

--Plague_of_Locusts_091_000--