I'm having trouble getting a friend's noname PCMCIA ethernet network card
to run on -1.3_ALPHA as of few days ago. The dmesg output's attached below,
the same result is also shown by the latest floppy on ftp.netbsd.org (which
is from 971104). The laptop this is on is a AcerNote Light Model no. 350PC
(in case this matters).

Does anyone have a clue on what's going on?


 - Hubert



Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3_ALPHA (OFFLINE) #0: Sun Nov 16 13:07:20 PST 1997
    hubertf@zero.warped.net:/usr/src/sys/arch/i386/compile/OFFLINE
cpu0: family 5 model 2 step c
cpu0: Intel Pentium (P54C) (586-class)
real mem  = 7925760
avail mem = 5267456
using 122 buffers containing 499712 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
Acer Labs product 0x1511 (host bridge, revision 0x04) at pci0 dev 0 function 0 not configured
Acer Labs product 0x1513 (ISA bridge, revision 0xa4) at pci0 dev 2 function 0 not configured
Chips and Technologies 65545 (VGA display) at pci0 dev 6 function 0 not configured
Acer Labs M4803 (IDE mass storage, revision 0x01) at pci0 dev 8 function 0 not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <IBM-DSOA-21080>
wd0: 1033MB, 2100 cyl, 16 head, 63 sec, 512 bytes/sec
wd0: using 16-sector 16-bit pio transfers, lba addressing
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pms0 at pc0 irq 12
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3
pcic0: controller 0 (Cirrus PD672X) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcmcia1: CIS version 2.0 or 2.01
pcmcia1: CIS info: RPTI, EP400 Ethernet NE2000 Compatible, CISV201–SL
pcmcia1: Manufacturer code 0xffffffff, product 0xffffffff
pcmcia1: function 0: network adapter, ccr addr 100 mask 1
pcmcia1: function 0, config table entry 48: I/O card; irq mask 9e3c; iomask a, iospace 300-31f; mwait_required rdybsy_active wp_active bvd_active io8 io16 irqlevel
pcmcia1: function 0, config table entry 49: I/O card; irq mask 9e3c; iomask a, iospace 320-33f; mwait_required rdybsy_active wp_active bvd_active io8 io16 irqlevel
pcmcia1: function 0, config table entry 50: I/O card; irq mask 9e3c; iomask a, iospace 340-35f; mwait_required rdybsy_active wp_active bvd_active io8 io16 irqlevel
pcmcia1: function 0, config table entry 51: I/O card; irq mask 9e3c; iomask a, iospace 360-37f; mwait_required rdybsy_active wp_active bvd_active io8 io16 irqlevel
pcmcia1: function 0, config table entry 52: I/O card; irq mask 9e3c; iomask a, iospace 240-25f; mwait_required rdybsy_active wp_active bvd_active io8 io16 irqlevel
pcmcia1: function 0, config table entry 53: I/O card; irq mask 9e3c; iomask a, iospace 280-29f; mwait_required rdybsy_active wp_active bvd_active io8 io16 irqlevel
pcmcia1: function 0, config table entry 54: I/O card; irq mask 9e3c; iomask a, iospace 2c0-2df; mwait_required rdybsy_active wp_active bvd_active io8 io16 irqlevel
RPTI, EP400 Ethernet NE2000 Compatible, CISV201–SL (manufacturer 0xffffffff, product 0xffffffff) function 0 not configured
biomask 4040 netmask 4040 ttymask 50ca
boot device: <unknown>
root device: x
use one of: wd0[a-h] fd0[a-h] halt
root device: wd0a
dump device (default wd0b): 
file system (default generic): 
root on wd0a dumps on wd0b
root file system type: ffs