Subject: Re: ncr0 on NetBSD/i386 AMD P133 Symbios Atlas UltraWide
To: None <current-users@NetBSD.ORG>
From: Michael Richardson <mcr@sandelman.ottawa.on.ca>
List: current-users
Date: 05/29/1997 23:14:04
-----BEGIN PGP SIGNED MESSAGE-----


  BTW: were there patches to chio at some point?

NetBSD 1.2D (SSW) #5: Wed Apr 16 15:33:15 EDT 1997
    mcr@istari.sandelman.ottawa.on.ca:/j/netbsd/src/sys/arch/i386/compile/SSW
cpu0: family 5 model 1 step 4
cpu0: AMD K5 (586-class)
real mem  = 33157120
avail mem = 29085696
using 430 buffers containing 1761280 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
Intel 82430VX (Triton VX) Host Bridge (host bridge, revision 0x02) at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371SB (Triton II) PCI-ISA Bridge (rev. 0x01)
Intel 82371SB (Triton II) IDE controller (IDE mass storage, interface 0x80) at pci0 dev 7 function 1 not configured
Intel 82371SB (Triton II) USB Interface (USB serial bus, revision 0x01) at pci0 dev 7 function 2 not configured
Trident Microsystems TGUI 9660 (VGA display, revision 0xd3) at pci0 dev 17 function 0 not configured
ncr0 at pci0 dev 19 function 0: NCR 53c875 Wide SCSI
ncr0: interrupting at irq 10
        initial value of SCNTL3 = 03, final = 13
ncr0: restart (scsi reset).
scsibus0 at ncr0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <MICROP, 1588-15MBSUN0669, SN0C> SCSI1 0/direct fixed
sd0: 639MB, 1632 cyl, 15 head, 53 sec, 512 bytes/sec
sd1 at scsibus0 targ 1 lun 0: <DEC, RZ28     (C) DEC, 442E> SCSI2 0/direct fixed
sd1: sd1(ncr0:1:0): WIDE SCSI (16 bit) enabledsd1(ncr0:1:0): 20.0 MB/s (100 ns, offset 15)
2007MB, 3045 cyl, 16 head, 84 sec, 512 bytes/sec
st0 at scsibus0 targ 6 lun 0: <ARCHIVE, Python 28849-XXX, 4.CM> SCSI2 1/sequential removable
st0: st0(ncr0:6:0): 5.0 MB/s (200 ns, offset 15)
density code 0x13, 512-byte blocks, write-enabled
ch0 at scsibus0 targ 6 lun 1: <ARCHIVE, Python 28849-XXX, 4.CM> SCSI2 8/changer removable
ch0: 4 slots, 1 drive, 1 picker, 0 portals
isa0 at pcib0
ep0 at isa0 port 0x280-0x28f irq 5: 3Com 3C509 Ethernet
ep0: MAC address 00:60:97:14:da:1d
ep0: 8KB byte-wide FIFO, 1:1 Rx:Tx split, utp/aui/bnc (default bnc)
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
npx0 at isa0 port 0xf0-0xff: using exception 16
vt0 at isa0 port 0x60-0x6f irq 1: unknown trident, 80 col, color, 8 scr, mf2-kbd, [R3.32]
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 440 netmask 460 ttymask 4e2
boot device: sd0
root on sd0a swap on sd0b
root file system type: ffs

-----BEGIN PGP SIGNATURE-----
Version: 2.6.3ia
Charset: latin1
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQB1AwUBM45F5aZpLyXYhL+BAQGRiQL+KIN/g8ZeOoRb4JN3vN6kLtwRP2v2Ojj5
PRPnoqAaAfGAgEnsFA2DdvPwf8yfijgdeDqjpYX6nw6fjt/mMrX2cf4r+5tmtcBT
e/zo+hvdR6YoBXtYRzNf6gcfE22vSQ+c
=ECuA
-----END PGP SIGNATURE-----