Hello!

I am using -current 140995 on my Amiga 3000. If I make a kernal with
sbic_inhibit_sync=0 I get the following error:

ahsc0 at mainbus0
scsibus0 at ahsc0
ahsc0: target 0 now synchronous, period=208ns, offset=8.
ahsc0 targ 0 lun 0: <QUANTUM, LPS540S, 5900> SCSI2 0/direct fixed
sd0 at scsibus0: 516MB, 2740 cyl, 4 head, 96 sec, 512 bytes/sec
ahsc0: target 1 now synchronous, period=248ns, offset=8.
sbicnextstate:xfer count 0 asr80 csr19
sbicnextstate: aborting csr 19 asr 80
ahsc0: csr == 0x19
ahsc0: abort next: csr = 0x19, asr = 0x00
ahsc0: sbicabort - sending ABORT command
ahsc0: sbicabort - sending DISC command
sbicicmd: last command ignored
ahsc0 targ 1 lun 0: <\\030QUANTUM, LP105S 91010940, 53.1> SCSI2 0/direct fixed
sd1 at scsibus0sbicwait TIMEO @1036 with asr=x0 csr=x40

using sbic_inhibit_sync=1 works ok:

ahsc0 at mainbus0
scsibus0 at ahsc0
ahsc0 targ 0 lun 0: <QUANTUM, LPS540S, 5900> SCSI2 0/direct fixed
sd0 at scsibus0: 516MB, 2740 cyl, 4 head, 96 sec, 512 bytes/sec
ahsc0 targ 1 lun 0: <QUANTUM, LP105S 910109405, 3.1> SCSI2 0/direct fixed
sd1 at scsibus0: 100MB, 1219 cyl, 4 head, 42 sec, 512 bytes/sec
ahsc0 targ 3 lun 0: <QUANTUM, LIGHTNING 730S, 241E> SCSI2 0/direct fixed
sd2 at scsibus0: 699MB, 3658 cyl, 4 head, 97 sec, 512 bytes/sec
ahsc0 targ 6 lun 0: <CONNER, CFP1080S, 4649> SCSI2 0/direct fixed
sd3 at scsibus0: 1030MB, 3658 cyl, 6 head, 96 sec, 512 bytes/sec


Now after some people reported that sbic.c is rewritten and known
to work syncronous I wonder if there is any chance for it woking
for me too :)

Thanx for any help in advance.

	Thorsten
-- 

   Name  : Thorsten Frueauf            Milano@irc cri@onaliM       //
   E-Mail: s_frueau@ira.uka.de oder ukfy@rz.uni-karlsruhe.de     \X/