I am trying to get my uVAX-II with DELQA ethernet to netboot from my Linux box.
I've got mopd running on the linux box, however, when I go to netboot, 
I get this:

>>> b/100 xqa0

  2..
Bootfile: (I type mopboot)

?4F SCBINT, XQA0
?06 HLT INST
    PC = 00800EE6
Failure.
>>>

mopd shows the following activity from the vax:

MOP DL 8:0:2b:8:f2:29    > ab:0:0:1:0:0      len   18 code 08 RPR 
MOP DL 0:20:18:71:6c:97  > 8:0:2b:8:f2:29    len    1 code 03 ASV 
MOP DL 8:0:2b:8:f2:29    > 0:20:18:71:6c:97  len   18 code 08 RPR 
MOP DL 0:20:18:71:6c:97  > 8:0:2b:8:f2:29    len 1006 code 02 MLD 
MOP DL 8:0:2b:8:f2:29    > 0:20:18:71:6c:97  len    3 code 0a RML
MOP DL 0:20:18:71:6c:97  > 8:0:2b:8:f2:29    len 1006 code 02 MLD 
MOP DL 8:0:2b:8:f2:29    > 0:20:18:71:6c:97  len    3 code 0a RML 

This goes on for some lines then ends with:

MOP DL 0:20:18:71:6c:97  > 8:0:2b:8:f2:29    len 1006 code 02 MLD 
MOP DL 8:0:2b:8:f2:29    > 0:20:18:71:6c:97  len    3 code 0a RML 
MOP DL 0:20:18:71:6c:97  > 8:0:2b:8:f2:29    len  326 code 02 MLD 
MOP DL 8:0:2b:8:f2:29    > 0:20:18:71:6c:97  len    3 code 0a RML 
MOP DL 0:20:18:71:6c:97  > 8:0:2b:8:f2:29    len   32 code 14 PLT 
MOP DL 8:0:2b:8:f2:29    > 0:20:18:71:6c:97  len    3 code 0a RML 


The boards are layed out as follows (BA23 enclosure)

	 KA630 CPU
	9M RAM Board
---DELQA---	----empty---
---empty---	----empty---
etc.

I also have a RQDX3 and one grant continuity card but 
these are not in the machine currently.

I have tried the boot.mopformat from 
ftp.netbsd.org/pub/NetBSD/NetBSD-1.3.2/vax/installation/netboot 
and v0.01, v0.05 and v1.2 of the DEQNA mopboot from 
ftp.nvg.ntnu.no/pub/NetBSD/DEQNA.

Any ideas what's wrong - I am running out of ideas.

-- 
Nathan S Chantrell 
nsc@zorg.org
http://www.zorg.org/