Re: About gcc, binutils and some boards

[berte <behzaterte%pm.me@localhost>]

Hello Nick,

First of all thanks for your support!

I changed a few flag variables for gcc because I had problems with OpenSBI initialization before but I didn't have time to check them individually. 

I guess there is no need for many flag variables but for now this is how I was able to bring-up the board :-)


StarFive #
U-Boot SPL 2021.10-00002-gac0ac69625 (Apr 07 2023 - 10:55:15 +0200)
DDR version: dc2e84f0.
Trying to boot from SPI

OpenSBI VF2_v2.11.5
   ____                    _____ ____ _____
  / __ \                  / ____|  _ \_   _|
 | |  | |_ __   ___ _ __ | (___ | |_) || |
 | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
 | |__| | |_) |  __/ | | |____) | |_) || |_
  \____/| .__/ \___|_| |_|_____/|___/_____|
        | |
        |_|

Platform Name             : StarFive VisionFive V2
Platform Features         : medeleg
Platform HART Count       : 5
Platform IPI Device       : aclint-mswi
Platform Timer Device     : aclint-mtimer @ 4000000Hz
Platform Console Device   : uart8250
Platform HSM Device       : ---
Platform PMU Device       : ---
Platform Reboot Device    : pm-reset
Platform Shutdown Device  : pm-reset
Platform Suspend Device   : ---
Firmware Base             : 0x40000000
Firmware Size             : 392 KB
Firmware RW Offset        : 0x40000
Runtime SBI Version       : 1.0

Domain0 Name              : root
Domain0 Boot HART         : 1
Domain0 HARTs             : 0*,1*,2*,3*,4*
Domain0 Region00          : 0x0000000002000000-0x000000000200ffff M: (I,R,W) S/U: ()
Domain0 Region01          : 0x0000000040000000-0x000000004003ffff M: (R,X) S/U: ()
Domain0 Region02          : 0x0000000040040000-0x000000004007ffff M: (R,W) S/U: ()
Domain0 Region03          : 0x0000000000000000-0xffffffffffffffff M: (R,W,X) S/U: (R,W,X)
Domain0 Next Address      : 0x0000000040200000
Domain0 Next Arg1         : 0x0000000042200000
Domain0 Next Mode         : S-mode
Domain0 SysReset          : yes
Domain0 SysSuspend        : yes

Boot HART ID              : 1
Boot HART Domain          : root
Boot HART Priv Version    : v1.11
Boot HART Base ISA        : rv64imafdcbx
Boot HART ISA Extensions  : none
Boot HART PMP Count       : 8
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 34
Boot HART MHPM Count      : 2
Boot HART MIDELEG         : 0x0000000000000222
Boot HART MEDELEG         : 0x000000000000b109


U-Boot 2021.10-00002-gac0ac69625 (Apr 07 2023 - 10:55:15 +0200)

CPU:   rv64imacu
Model: StarFive VisionFive V2
DRAM:  4 GiB
MMC:   sdio0@16010000: 0, sdio1@16020000: 1
Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

StarFive EEPROM format v2

--------EEPROM INFO--------
Vendor : StarFive Technology Co., Ltd.
Product full SN: VF7110A1-2249-D004E000-00000624
data version: 0x2
PCB revision: 0xa1
BOM revision: A
Ethernet MAC0 address: 6c:cf:39:00:18:3d
Ethernet MAC1 address: 6c:cf:39:00:18:3e
--------EEPROM INFO--------

In:    serial
Out:   serial
Err:   serial
Model: StarFive VisionFive V2
Net:   eth0: ethernet@16030000, eth1: ethernet@16040000
switch to partitions #0, OK
mmc1 is current device
found device 1
bootmode flash device 1
406 bytes read in 5 ms (79.1 KiB/s)
Importing environment from mmc1 ...
Can't set block device
Hit any key to stop autoboot:  0
StarFive #


Best regards,
Behzat.


------- Original Message -------
On Monday, April 3rd, 2023 at 08:17, Nick Hudson <nick.hudson%gmx.co.uk@localhost> wrote:


> 
> 
> On 02/04/2023 16:44, berte wrote:
> 
> > Hello everyone,
> > 
> > In my free time, I ported gcc12 and the binutils package. I also needed
> > the u-boot package to run the board I had, so I added that too. Finally,
> > I added a u-boot package for a different board to ensure everything worked.
> > 
> > https://wip.pkgsrc.org/cgi-bin/gitweb.cgi?p=pkgsrc-wip.git;a=commit;h=3582bbf3c9ac38ca31daf2f98ecd31a6b9878800 https://wip.pkgsrc.org/cgi-bin/gitweb.cgi?p=pkgsrc-wip.git;a=commit;h=3582bbf3c9ac38ca31daf2f98ecd31a6b9878800
> > 
> > I would appreciate if you could take a look at it in your free time and
> > give me some feedback.
> 
> 
> I will take a look.
> 
> Thanks,
> Nick