Re: ASC/EASC audio device (take 3) (was take 2)

[John Klos <john%klos.com@localhost>]

> I've found that I'd mucked up the interrupt handler and two register
> definitions.
>
> The new patch to be applied to a clean tree is found at:
> ftp://ftp.netbsd.org/pub/NetBSD/misc/nat/ascaudio-take3.diff

I've tried these on a Quadra 605:

[     1.000000] ascaudio0 at obio0: Apple Sound Chip
[     1.000000] audio0 at ascaudio0: playback, capture, half duplex, independent
[     1.000000] audio0: slinear_be:16 1ch 22254Hz, blk 8192 bytes (368.1ms) for playback
[     1.000000] audio0: slinear_be:16 1ch 11025Hz, blk 8192 bytes (743ms) for recording
[     1.000000] spkr0 at audio0: PC Speaker (synthesized)
[     1.000000] wsbell0 at spkr0 mux 1

cat ~john/beethoven7th.wav > /dev/sound0
cat: stdout: Resource temporarily unavailable

[   990.244170] audio0(ascaudio0): audio_write: device timeout, seq=0, usrbuf=64936/H64936, outbuf=32768/32768
[   993.260963] audio0(ascaudio0): audio_write: device timeout, seq=0, usrbuf=64936/H64936, outbuf=32768/32768
[   996.344458] audio0(ascaudio0): audio_drain: device timeout, seq=0, usrbuf=64936/H64936, outbuf=32768/32768
[  1014.080159] audio0(ascaudio0): audio_write: device timeout, seq=0, usrbuf=64790/H64790, outbuf=32768/32768
[  1017.097002] audio0(ascaudio0): audio_write: device timeout, seq=0, usrbuf=64790/H64790, outbuf=32768/32768
[  1020.180487] audio0(ascaudio0): audio_drain: device timeout, seq=0, usrbuf=64790/H64790, outbuf=32768/32768

What else can I try?

John