On Mon, Aug 09, 1999 at 07:34:48PM -0400, Christopher P. Gill wrote:
> map sn0 192.168.1.0/24 -> 123.123.123.123/32 portmap tcp/udp 10000:40000
> map sn0 192.168.1.0/24 -> 123.123.123.123/32

The second map line might be confusing things. You only need one.

As to cabling: the outbound interface should be hooked directly to the adsl
modem/cable modem (using a crossover cable if necessary -- most are built
so that it's not necessary, however). The inbound interface should be
hooked directly to a normal port on the hub (not the uplink port, that's
only for connecting to another hub).

All machines on the internal net should be set to use (in your case)
192.168.1.1 as the default gateway.

You should be able to ping both a machine on the inside network, and one on
the outside, from the NetBSD machine. From an inside machine, you should be
able to do a traceroute to show it going through the NetBSD box and out
onto the internet.

-- 
Chris Brown -- Macintosh networking/Web development
<chrsbrwn@mindspring.com> <http://www.mindspring.com/~chrsbrwn>
This message was sent from a IIci running NetBSD-Mac68k