Subject: 1.5R (20010206) bootup - weird cardbus messages
To: None <port-i386@netbsd.org>
From: Darren Reed <darrenr@reed.wattle.id.au>
List: port-i386
Date: 03/03/2001 00:59:21
Booting NetBSD-1.5R on a Dell Inspiron 8000, dmesg as follows from a
cardbus configured kernel.  Lines starting with "***" don't look right
to me ?  FWIW, I tried changing /dev/pci/esm.c to probe the Maestro 3
the same as the Maestro 2E (same driver is used on Windows ME/2K) but
in doing that, it freezes after printing the biomask and doesn't respond
to CTRL-ALT-ESC.  btw, on some boots the "MHz" is reported as 698.5 and
on others 848.18 (it is actually a P-III 850).

NetBSD 1.5R (CARDBUS) #4: Sat Mar  3 13:40:01 EST 2001
    root@cardbus:/usr/src/sys/arch/i386/compile/CARDBUS
cpu0: Intel Pentium III (Coppermine) (686-class), 698.50 MHz
cpu0: I-cache 16K 32b/line 4-way, D-cache 16K 32b/line 2/4-way
cpu0: L2 cache 256K 32b/line 8-way
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX,FXSR,XMM>
total memory = 255 MB
avail memory = 234 MB
using 3296 buffers containing 13184 KB of memory
BIOS32 rev. 0 found at 0xffe90
PCI BIOS rev. 2.1 found at 0xfc06e
PCI IRQ Routing Table rev. 1.0 found at 0xfbc20, size 192 bytes (10 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371MX Mobile PCI I/O IDE Xcelerator (MPIIX))
pciintr_link_init: bus 2 device 3 link 0x61: bad irq bitmap 0x0020, should be 0xdef8
pciintr_link_init: bus 0 device 30 link 0x61: bad irq bitmap 0xdef8, should be 0x0020
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82815 Hub (rev. 0x02)
*** pchb0: random number generator enabled, -72727Kb/s
ppb0 at pci0 dev 1 function 0: Intel 82815 AGP (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies product 0x4d46 (rev. 0x00)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0: Intel product 0x2448 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ESS Technology Inc Maestro 3 PCI Audio Accelerator (audio multimedia, revision 0x10) at pci2 dev 3 function 0 not configured
cbb0 at pci2 dev 15 function 0: Texas Instruments PCI4451 PCI-CardBus Bridge w/ OCHI IEEE 1394 Controller (rev. 0x00)
cbb1 at pci2 dev 15 function 1: Texas Instruments PCI4451 PCI-CardBus Bridge w/ OCHI IEEE 1394 Controller (rev. 0x00)
Texas Instruments PCI4451 OCHI IEEE 1394 HOST Controller w/ PCI-CardBus Bridge (Firewire serial bus, interface 0x10) at pci2 dev 15 function 2 not configured
cbb0: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000b20
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x244c (rev. 0x02)
pciide0 at pci0 dev 31 function 1: Intel product 0x244a (rev. 0x02)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to compatibility mode
pciide0: primary channel interrupting at irq 14
atapibus0 at pciide0 channel 0
cd0 at atapibus0 drive 1: <TOSHIBA DVD-ROM SD-C2402, 1100001635, 1015> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23BA-20>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (not responding; disabled or no drives?)
uhci0 at pci0 dev 31 function 2: Intel 82801BA USB Controller (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
apm0 at mainbus0: Power Management spec V1.2
biomask ef65 netmask ef65 ttymask ffe7
*** cbb0: bad Vcc request. sock_ctrl 0x30, sock_status 0x30000b20
pcmcia1: CIS version PCMCIA 2.0 or 2.1
pcmcia1: CIS info: Psion Dacom, Gold Card Global 56K+Fax, 56K+Fax, V8.25
pcmcia1: Manufacturer code 0x16c, product 0x5
pcmcia1: function 0: serial port, ccr addr 200 mask 3
pcmcia1: function 0, config table entry 33: I/O card; irq mask 86bc; iomask 3, iospace 2f8-2ff; io8 irqlevel audio
pcmcia1: function 0, config table entry 32: I/O card; irq mask 86bc; iomask 0, iospace 3f8-3ff; io8 irqlevel audio
pcmcia1: function 0, config table entry 34: I/O card; irq mask 86bc; iomask 0, iospace 3e8-3ef; io8 irqlevel audio
pcmcia1: function 0, config table entry 35: I/O card; irq mask 86bc; iomask 0, iospace 2e8-2ef; io8 irqlevel audio
pcmcia1: function 0, config table entry 48: I/O card; irq mask 86bc; iomask 0, iospace 2f8-2ff; io8 irqlevel audio
com3 at pcmcia1 function 0: serial device
com3: ns16550a, working fifo
tlp0 at cardbus0 dev 0 function 0: Xircom X3201-3 Ethernet, pass 0.3
tlp0: Ethernet address 00:10:a4:12:f0:b3
tqphy0 at tlp0 phy 0: 78Q2120 10/100 media interface, rev. 11
tqphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
*** cbb0: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000b68
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
*** cbb0: bad Vcc request. sock_ctrl 0x30, sock_status 0x30000b20
tlp0: interrupting at 11