Just realized the probe list had lots o' nulls at the beginning, so it probably
didn't take to well to the mailer. Here goes a second time...

-pjl

NetBSD 1.3E (INSTALL) #0: Mon Jun  8 06:43:23 EDT 1998
    root@:/usr/src/sys/arch/i386/compile/INSTALL
cpu0: family 5 model 8 step 1
cpu0: Intel Pentium (586-class)
real mem  = 66715648
avail mem = 58933248
using 840 buffers containing 3440640 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7100 (rev. 0x01)
pcib0 at pci0 dev 1 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x01)
vendor 0x8086 product 0x7111 (IDE mass storage, interface 0x80, revision 0x01) 
at pci0 dev 1 function 1 not configured
vendor 0x8086 product 0x7112 (USB serial bus, revision 0x01) at pci0 dev 1 
function 2 not configured
vendor 0x8086 product 0x7113 (miscellaneous bridge, revision 0x01) at pci0 dev 
1 function 3 not configured
vendor 0x10c8 product 0x0004 (VGA display) at pci0 dev 2 function 0 not 
configured
vendor 0x104c product 0xac15 (CardBus bridge, revision 0x01) at pci0 dev 3 
function 0 not configured
vendor 0x104c product 0xac15 (CardBus bridge, revision 0x01) at pci0 dev 3 
function 1 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <IBM-DTNA-22160>
wd0: using 16-sector 16-bit pio transfers, lba mode
wd0: 2067MB, 4233600 sec, 512 bytes/sec
wdc1 at isa0 port 0x170-0x177 irq 15
atapibus1 at wdc1
cd0 at atapibus1 drive 0: <CD-ROM  CDR_U200, , 1.09> type 5 cdrom removable
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version 2.0 or 2.01
pcmcia0: CIS info: 3Com Corporation, 3C589D, TP/BNC LAN Card Ver. 2a, 000002
pcmcia0: Manufacturer code 0x101, product 0x589
pcmcia0: function 0: network adapter, ccr addr 10000 mask 3
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, 
iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
pcmcia0: function 0, config table entry 3: I/O card; irq mask ffff; iomask 4, 
iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
ep1 at pcmcia0 function 0 port 0x330-0x33f: 3Com 3C589 Ethernet
ep1: MAC address 00:60:08:92:79:10
ep1: 8KB byte-wide FIFO, 5:3 Rx:Tx split, utp/aui/bnc (default utp)
pcmcia1 at pcic0 controller 0 socket 1
pcmcia1: CIS version 2.0 or 2.01
pcmcia1: CIS info: Adaptec, Inc., APA-1460 SCSI Host Adapter, Version 0.01
pcmcia1: Manufacturer code 0x12f, product 0x2
pcmcia1: function 0: multi-function, ccr addr 2000 mask 1
pcmcia1: function 0, config table entry 9: I/O card; irq mask 1e00; iomask a, 
iospace 340-35f; rdybsy_active wp_active bvd_active io16 irqlevel
pcmcia1: function 0, config table entry 8: I/O card; irq mask 1e00; iomask a, 
iospace 140-15f; rdybsy_active wp_active bvd_active io16 irqlevel
aic1 at pcmcia1 function 0 port 0x340-0x35f: APA-1460 SCSI Host Adapter
scsibus0 at aic1: 8 targets
cd1 at scsibus0 targ 6 lun 0: <TOSHIBA, XM-4101TASUNSLCD, 0494> SCSI2 5/cdrom 
removable
pcmcia1: card irq 7
biomask c0c0 netmask c0c0 ttymask c0ca
md0: internal 1537K image area
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs

-------------------------------------------------------------------------------
Paul J. Lavoie		pjl@ilx.com		(212) 510-3029
ILX Systems, Inc.	111 Fulton St		New York, NY  10038