tech-x11 archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Xorg hangs on Radeon HD 4650 with xf86-video-{ati,radeonhd}



Folks:
        I have a (relatively) new machine running NetBSD 5.0_RC3 with an
        ATI RadeonHD 4650 PCIe card.  Xorg works relatively well with the
        vesa driver (I think it had issues getting the right panel size
        of the LCD monitor and picked sub-optimal resolution), but I'd
        really like to get it running the radeon ati sub-driver and/or
        radeonhd driver.

        I've tried both the in-tree radeon / radeonhd as well as latest
        released versions and latest git versions, however, all versions
        of *both* drivers have the same fatal flaw: X will start once,
        but once I exit X and attempt to re-start it, the machine locks
        hard with a corrupted display... (hard enough that I have to force
        it to turn off by holding the power switch for 5sec).

        Note that the first invocation of X is generally problem-free,
        with the exception of specific issues with certain versions of
        the drivers (e.g. some radeon driver versions have VT-switching
        problems and don't restore the X screen right), but the second
        X invocation either hangs the box hard or (rarely) causes it to
        reboot itself... 

        Before the hang/reboot, the screen comes up corrupted with the
        stock X grey-stiple background offset from the beginning of the
        screen by some amount and random junk on a black background in
        the first few lines of the display.  The cursor also generally
        is some corrupted blob; the rest of the screen generally looks
        like a picture from a bad video tape with vertical hold problems
        (ie, spikes of gray-stipple background interspersed with black
         b/g across the screen)

        (dmesg of the machine below)

Any ideas welcome...
--rafal

NetBSD 5.0_RC3 (GENERIC) #5: Wed Mar 25 21:53:19 EDT 2009
        rafal@puck:/extra/amd64/obj-5/sys/arch/amd64/compile/GENERIC
total memory = 6143 MB
avail memory = 5940 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.5 @ 0xf06e0 (54 entries)
HP-Pavilion NE502AV-ABA a6750t ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2500MHz, id 0x1067a
cpu1 at mainbus0 apid 1: Intel 686-class, 2500MHz, id 0x1067a
cpu2 at mainbus0 apid 2: Intel 686-class, 2500MHz, id 0x1067a
cpu3 at mainbus0 apid 3: Intel 686-class, 2500MHz, id 0x1067a
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <HPQOEM,SLIC-CPC,20081216>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03): aux port
pckbc2: irq 12
FWH (INT0800) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x29c0 (rev. 0x02)
agp0 at pchb0: can't find internal VGA device config space
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x29c1 (rev. 0x02)
pci1 at ppb0 bus 4
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x9498 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
azalia0 at pci1 dev 0 function 1: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 17
azalia0: host: 0x1002/0xaa38 (rev. 0), HDA rev. 1.0
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 18
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
azalia1 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia1: interrupting at ioapic0 pin 22
azalia1: host: 0x8086/0x293e (rev. 2), HDA rev. 1.0
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x02)
pci2 at ppb1 bus 3
pci2: no spaces enabled!
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2944 (rev. 0x02)
pci3 at ppb2 bus 2
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168B/8111B PCIe Gigabit Ethernet (rev. 
0x02)
re0: interrupting at ioapic0 pin 18
re0: Unknown revision (0x3c400000)
re0: Ethernet address 00:24:8c:13:11:bb
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 23
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x02)
uhci4: interrupting at ioapic0 pin 18
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 3: vendor 0x8086 product 0x2939 (rev. 0x02)
uhci5: interrupting at ioapic0 pin 16
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x92)
pci4 at ppb3 bus 1
pci4: memory space enabled
fwohci0 at pci4 dev 5 function 0: vendor 0x11c1 product 0x5811 (rev. 0x70)
fwohci0: interrupting at ioapic0 pin 20
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:1e:8c:00:01:ba:c1:fd
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2916 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2822
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: AHCI revision 1.2, 6 ports, 32 command slots, features 0xef20e0e0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: ATI R600 HDMI (rev. 1.0), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
azalia1: codec[0]: Realtek ALC888 (rev. 1.1), HDA rev. 1.0
audio1 at azalia1: full duplex, independent
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub7: 2 ports with 2 removable, self powered
ahcisata0 port 1: device present, speed: 1.5Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0: <WDC WD6400AAKS-65A7B2>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 596 GB, 1240341 cyl, 16 head, 63 sec, 512 bytes/sect x 1250263728 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-ST BDDVDRW GBC-H20L, 847CE046714, 1.B8> cdrom 
removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
umass0 at uhub4 port 5 configuration 1 interface 0
umass0: Generic USB2.0-CRW, rev 2.00/11.37, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 4 luns per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Compact Flash, 1.00> disk removable
sd0: drive offline
sd0: unable to open device, error = 19
sd1 at scsibus0 target 0 lun 1: <Generic-, SM/xD-Picture, 1.00> disk removable
sd1: drive offline
sd1: unable to open device, error = 19
sd2 at scsibus0 target 0 lun 2: <Generic-, SD/MMC, 1.00> disk removable
sd2: drive offline
sd2: unable to open device, error = 19
sd3 at scsibus0 target 0 lun 3: <Generic-, MS/MS-Pro, 1.00> disk removable
sd3: drive offline
sd3: unable to open device, error = 19
uvideo0 at uhub4 port 7 configuration 1 interface 0: vendor 0x046d product 
0x09a2, rev 2.00/0.08, addr 3
video0 at uvideo0: vendor 0x046d product 0x09a2, rev 2.00/0.08, addr 3
uaudio0 at uhub4 port 7 configuration 1 interface 2: vendor 0x046d product 
0x09a2, rev 2.00/0.08, addr 3
uaudio0: audio rev 1.00
audio2 at uaudio0: full duplex, independent
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio3 at pad0: half duplex

-- 
  Time is an illusion; lunchtime, doubly so.     |/\/\|           Rafal Boni
                   -- Ford Prefect               |\/\/|      
rafal%pobox.com@localhost


Home | Main Index | Thread Index | Old Index