tron@zhadum.de (Matthias Scheler) writes:
> In article <87oecmndvl.fsf@snark.piermont.com>,
> 	"Perry E. Metzger" <perry@piermont.com> writes:
>> 
>> System: i386 laptop (IBM T41) running -current
>> 
>> Graphics device is a "Radeon R250 Lf [Radeon Mobility 9000 M9]"
>
> Could you provide "dmesg" output?

See the end of this message.

> Is agp(4) enabled in your kernel configuration?

Yes.

>> I just rebuilt and re-installed the entire system for the first time
>> in a couple of months, and my X server is now crashing with a 
>> Signal 11 on startup.
>
> Can you please provide more information? What does "/var/log/XFree86.0.log"
> say? Could you "ktruss" the X11 server, please?

It really does just crash with a signal 11. Really. Do you really want
a ktruss?

>> Anyone know what has happened?
>
> This is probably related to the import of XFree86 4.5.0. The ATI driver
> still works for various graphic cards (e.g. Radeon 8500 or 9800 Pro).
> My guess is that it is a problem specific to the chipset of your notebook.

Possible.

NetBSD 3.99.3 (HACKWORTH) #0: Sun Apr 10 19:08:50 EDT 2005
	perry@hackworth:/usr/src/sys/arch/i386/compile/HACKWORTH
total memory = 1534 MB
avail memory = 1497 MB
BIOS32 rev. 0 found at 0xfd750
PCI BIOS rev. 2.1 found at 0xfd8d6
PCI IRQ Routing Table rev. 1.0 found at 0xfdea0, size 272 bytes (15 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371FB (PIIX) PCI-ISA Bridge compatible)
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x00005800
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x00005808
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x00005810
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x0000580c
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x60000000
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Banias) (686-class), 598.08 MHz, id 0x695
cpu0: features a7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR>
cpu0: features a7e9f9bf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features a7e9f9bf<FXSR,SSE,SSE2,TM,SBF>
cpu0: features2 180<EST,TM2>
cpu0: "Intel(R) Pentium(R) M processor 1700MHz"
cpu0: using thermal monitor 2
cpu0: Enhanced SpeedStep running at 600 MHz (956 mV)
cpu0: Enhanced SpeedStep frequencies available (MHz): 1700 1400 1200 1000 800 600
pnpbios0 at mainbus0: nodes 21, max len 246
pckbc0 at pnpbios0 index 7 (PNP0303): kbd port
pckbc1 at pnpbios0 index 17 (IBM0057, attached as PNP0F13): aux port
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82855PM MCH Host Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: Intel 82855PM Host-AGP Bridge (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M9 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801DB USB EHCI Controller (rev. 0x01)
ehci0: interrupting at irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x81)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 0 function 0: Texas Instruments PCI4520 PCI-CardBus Bridge w/ IEEE 1394 Host Controller (rev. 0x01)
cbb1 at pci2 dev 0 function 1: Texas Instruments PCI4520 PCI-CardBus Bridge w/ IEEE 1394 Host Controller (rev. 0x01)
wm0 at pci2 dev 1 function 0: Intel i82540EP 1000BASE-T Ethernet, rev. 3
wm0: interrupting at irq 11
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:0d:60:77:41:d2
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ath0 at pci2 dev 2 function 0
ath0: interrupting at irq 11
ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 5
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0
pcmcia1 at cardslot1
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: Intel 82801DB ISA Bridge (rev. 0x01)
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: SpeedStep enabled
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801DB SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at irq 5
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
Intel 82801DB AC97 Modem Controller (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured
isa0 at ichlpcib0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
pcppi0: attached to attimer0
apm0 at mainbus0: Power Management spec V1.2
auich0: measured ac97 link rate at 48002 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
IPsec: Initialized Security Association Processing.
cbb0: wait took 0.014636s
ohci0 at cardbus0 dev 0 function 0: Lucent Technologies Sierra Wireless AirCard 580 (rev. 0x10)
ohci0: interrupting at 11
ohci0: OHCI version 1.0, legacy support
usb4 at ohci0: USB revision 1.0
uhub4 at usb4
uhub4: Lucent Technolo OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
wd0 at atabus0 drive 0: <HTS726060M9AT00>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 53805 MB, 109319 cyl, 16 head, 63 sec, 512 bytes/sect x 110194034 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
usb_new_device: set address 2 failed
uhub_explore: usb_new_device failed, error=SET_ADDR_FAILED
uhub4: device problem, disabling port 1
ugensa0 at uhub4 port 1
ugensa0: AirPrime, Incorporated AirPrime CDMA Wireless PC Card, rev 1.10/0.01, addr 2
ugensa0: unexpected endpoint
ucom0 at ugensa0 portno -861030996: portno -861030996, Generic Serial Device
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)