Hi. I have a strange problem with the XF86_SVGA X server shipped with
NetBSD-1.5.2 (the recommended server for my neomagick card): when I run
startx, the server immediately quits with a memory error message:


$ startx
XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: November 30 2000
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: NetBSD/i386 1.5.2 [ELF] The NetBSD Foundation, Inc.
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 1):
      NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
      RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
      GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev1),
      GeForce2 Ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR,
      Quadro 2 MXR, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
      ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
      ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
      wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati,
      sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
      sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx,
      tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
      tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
      tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
      tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
      cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade,
      clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,
      clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465,
      clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543,
      clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w,
      mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067,
      oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,
      ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
      ark2000pv, ark2000mt, mx, realtek, s3_virge, AP6422, AT24, AT3D,
      s3_savage, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
      ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
      ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
      ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci,
      Voodoo Banshee, Voodoo3, smi, generic
Using wscons driver (version 3.32)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "en_US(pc102)+fr"
(**) XKB: geometry: "pc"
(**) Mouse: type: IMPS/2, device: /dev/pms0, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "NeoMagic (laptop/notebook)"
(**) SVGA: Monitor ID: "My Monitor"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) SVGA: PCI: NeoMagic NM2160 rev 1, Memory @ 0xfd000000, 0xfea00000
(--) SVGA: chipset:  NM2160
(--) SVGA: videoram: 2048k
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 90.000 MHz
(--) SVGA: NM2160: Removing mode (1024x768) larger than the LCD panel (800x600)
(**) SVGA: Mode "800x600": mode clock =  40.000
(--) SVGA: Virtual resolution set to 800x600
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: NeoMagic MagicGraph 128XD (NM2160) chip
(--) SVGA: NM2160: Panel is a 800x600 color TFT display
(--) SVGA: NM2160: Internal LCD only display mode
(--) SVGA: NM2160: Video modes are displayed in the upper-left corner
(--) SVGA: NM2160: Low resolution video modes are stretched

Fatal server error:
xf86MapVidMem: Address 0xfea00000 outside allowable range


When reporting a problem related to a server crash, please send
the full server output, not just the last messages

X connection to :0.0 broken (explicit kill or server shutdown).





I have a little more detailed output when just running X:

$ X
_XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: server already running

Fatal server error:
Cannot establish any listening sockets - Make sure an X server isn't already running

When reporting a problem related to a server crash, please send
the full server output, not just the last messages

Anyone got any clue about this problem, or anyone got X to work on
Inspiron 3200 ? Thanks for any help,

-- 
BBP