Re: gcc updated to latest 4.8 branch snapshot.

To: skrll%netbsd.org@localhost
Subject: Re: gcc updated to latest 4.8 branch snapshot.
From: Yasushi Oshima <oshima-ya%yagoto-urayama.jp@localhost>
Date: Fri, 17 Oct 2014 00:04:51 +0900 (JST)

Nick wrote:
> Can you post the dmesg of your system, please?

Yes,
This is I-O DATA USL-5P with internal CF root,
and kernel and userland binary is from ftp://nyftp.netbsd.org/pub/NetBSD-daily/HEAD/201401050710Z.
* In this environment, pkgsrc build failed and atf-test failed.
dmesg is:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.1 (GENERIC.201410150710Z) #0: Wed Oct 15 09:38:35 UTC 2014
        builds%b42.netbsd.org@localhost:/home/builds/ab/HEAD/landisk/201410150710Z-obj/home/source/ab/HEAD/src/sys/arch/landisk/compile/GENERIC
Model: I-O DATA LANDISK
total memory = 65536 KB
avail memory = 57892 KB
kern.module.path=/stand/landisk/7.99.1/modules
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0: SH4 266.666 MHz PCLOCK 33.333 MHz
cpu0: 8KB/32B direct-mapped Instruction cache.
cpu0: 16KB/32B direct-mapped Data cache.
cpu0: U0, P0, P3 write-through; P1 write-through
cpu0: full-associative 4 ITLB, 64 UTLB entries
cpu0: multiple virtual storage mode, SQ access: kernel, wired 3
shpcic0 at mainbus0: vendor 1054 product 350e (host bridge, revision 0x01)
pci0 at shpcic0
pci0: i/o space, memory space enabled
re0 at pci0 dev 0 function 0: RealTek 8139C+ 10/100BaseTX (rev. 0x20)
re0: interrupting at irq 5
re0: Ethernet address 00:a0:b0:9d:c2:3d
re0: using 64 tx descriptors
rlphy0 at re0 phy 0: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci0 dev 2 function 0: vendor 1033 product 0035 (rev. 0x43)
ohci0: interrupting at irq 7
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 2 function 1: vendor 1033 product 0035 (rev. 0x43)
ohci1: interrupting at irq 8
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 2 function 2: vendor 1033 product 00e0 (rev. 0x04)
ehci0: interrupting at irq 5
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
shb0 at mainbus0
scif0 at shb0
scif0: console
rs5c313rtc0 at shb0: RICOH 5C313 real time clock
obio0 at mainbus0
wdc0 at obio0 port 0x14000000-0x1400000f irq 10
atabus0 at wdc0 channel 0
btn0 at obio0 irq 12: USL-5P buttons
pwrsw0 at obio0 irq 11: Power Switch
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tmu_pclock_4" frequency 8333333 Hz quality 0
uhub0 at usb0: vendor 1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
wd0 at atabus0 drive 0
wd0: <HAGIWARA SYS-COM MCF10P-008GSC>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 7375 MB, 14986 cyl, 16 head, 63 sec, 512 bytes/sect x 15105888 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b


And another one is also USL-5P with internal CF root and swap on USB memory.
Kernel(GENEIRC) and userland is nick's binary. 
* In this environment, pkgsrc build OK but atf-test failed.
dmesg is:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_BETA (GENERIC) #0: Fri Oct 10 11:41:11 BST 2014
        nick@zoom:/wrk/obj/landdisk/usr/src/sys/arch/landisk/compile/GENERIC
Model: I-O DATA LANDISK
total memory = 65536 KB
avail memory = 57884 KB
kern.module.path=/stand/landisk/7.0/modules
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0: SH4 266.666 MHz PCLOCK 33.333 MHz
cpu0: 8KB/32B direct-mapped Instruction cache.
cpu0: 16KB/32B direct-mapped Data cache.
cpu0: U0, P0, P3 write-through; P1 write-through
cpu0: full-associative 4 ITLB, 64 UTLB entries
cpu0: multiple virtual storage mode, SQ access: kernel, wired 3
shpcic0 at mainbus0: Hitachi SH7751R PCI Controller (host bridge, revision 0x01)
pci0 at shpcic0
pci0: i/o space, memory space enabled
re0 at pci0 dev 0 function 0: RealTek 8139C+ 10/100BaseTX (rev. 0x20)
re0: interrupting at irq 5
re0: Ethernet address 00:a0:b0:9d:c3:ac
re0: using 64 tx descriptors
rlphy0 at re0 phy 0: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci0 dev 2 function 0: NEC USB Host Controller (rev. 0x43)
ohci0: interrupting at irq 7
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 2 function 1: NEC USB Host Controller (rev. 0x43)
ohci1: interrupting at irq 8
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 2 function 2: NEC USB2 Host Controller (rev. 0x04)
ehci0: interrupting at irq 5
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
shb0 at mainbus0
scif0 at shb0
scif0: console
rs5c313rtc0 at shb0: RICOH 5C313 real time clock
obio0 at mainbus0
wdc0 at obio0 port 0x14000000-0x1400000f irq 10
atabus0 at wdc0 channel 0
btn0 at obio0 irq 12: USL-5P buttons
pwrsw0 at obio0 irq 11: Power Switch
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tmu_pclock_4" frequency 8333333 Hz quality 0
uhub0 at usb0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
pwrsw0 at obio0 irq 11: Power Switch
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tmu_pclock_4" frequency 8333333 Hz quality 0
uhub0 at usb0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: Imation Nano Pro, rev 2.00/1.10, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Imation, Nano Pro, PMAP> disk removable
sd0: 15294 MB, 30588 cyl, 32 head, 32 sec, 512 bytes/sect x 31322112 sectors
wd0 at atabus0 drive 0
wd0: <CF 4GB>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 3871 MB, 7866 cyl, 16 head, 63 sec, 512 bytes/sect x 7928928 sectors
wd0: drive supports PIO mode 4, DMA mode 2
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b

I'll try to clean install again in this weekend.

Thanks.

References:
- gcc updated to latest 4.8 branch snapshot.
  - From: matthew green
- Re: gcc updated to latest 4.8 branch snapshot.
  - From: Yasushi Oshima
- Re: gcc updated to latest 4.8 branch snapshot.
  - From: Nick Hudson

Prev by Date: Re: gcc updated to latest 4.8 branch snapshot.
Next by Date: Noisy ./build.sh with -N0
Previous by Thread: Re: gcc updated to latest 4.8 branch snapshot.
Next by Thread: Noisy ./build.sh with -N0
Indexes:

Home | Main Index | Thread Index | Old Index