Well, let's see how my little baby performs now. 

	Sean.
- --
md.ebone.net:/usr/src/sys/arch/i386/compile/GENERIC.MP
total memory = 511 MB
avail memory = 462 MB
using 6573 buffers containing 26292 KB of memory
biostramp installed @ 1000
BIOS32 rev. 0 found at 0xfb410
mainbus0 (root)
mainbus0: scanning 0x9fc00 to 0x9fff0 for MP signature
mainbus0: scanning 0x9f800 to 0x9fbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xf5990
mainbus0: MP config table at 0xf1400, 308 bytes long
mainbus0: Intel MP Specification (Version 1.1)
mainbus0: MP OEM OEM00000 Product PROD00000000
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: family 6 model 8 step 1
cpu0: Intel Pentium III (E) (686-class)
cpu0: features fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features fbff<PGE,MCA,CMOV>
cpu0: calibrating local timer
cpu0: apic clock running at 100 MHz
cpu0: kstack at 0xe3c28000 for 8192 bytes
cpu0: idle pcb at 0xe3c28000, idle sp at 0xe3c29fa0
cpu1 at mainbus0: apid 1 (application processor)
cpu1: family 6 model 8 step 1
cpu1: Intel Pentium III (E) (686-class)
cpu1: features fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features fbff<PGE,MCA,CMOV>
cpu1: kstack at 0xe3c2a000 for 8192 bytes
cpu1: idle pcb at 0xe3c2a000, idle sp at 0xe3c2bfa0
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 11, 24 pins
ioapic0: int0 attached to ExtINT (type 3<type=3=ExtINT> flags 0<pol=0,trig=0>)
ioapic0: int1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int2 attached to isa0 irq 0 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int8 attached to isa0 irq 8 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int9 attached to isa0 irq 9 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int10 attached to isa0 irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int11 attached to isa0 irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int16 attached to pci0 device 15 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int17 attached to pci0 device 16 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int18 attached to pci0 device 18 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int19 attached to pci0 device 19 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int16 attached to pci1 device 0 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int23 attached to SMI (type 2<type=2=SMI> flags 0<pol=0,trig=0>)
local apic: int0 attached to ExtINT (type 3<type=3=ExtINT> flags 0<pol=0,trig=0>)
local apic: int1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Matrox MGA G400 AGP (rev. 0x04)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: device disabled (at device)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
pci_intr_map: no mapping for pin D
uhci0: couldn't map interrupt
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
eap0 at pci0 dev 15 function 0: Ensoniq AudioPCI 97 ES1373B (rev. 0x06)
eap0: interrupting at apic 2 int 16 (irq 15)
eap0: Crystal CS4297 codec; headphone, 18 bit DAC, 18 bit ADC, no 3D stereo
audio0 at eap0: full duplex, mmap, independent
midi0 at eap0: AudioPCI MIDI UART
isp0 at pci0 dev 16 function 0
isp0: Qlogic ISP Driver, NetBSD (pci) Platform Version 1.0 Core Version 2.0
isp0: interrupting at apic 2 int 17 (irq 10)
isp0: Ultra Mode Capable
isp0: Board Revision 1040B, loaded F/W Revision 4.65.0
isp0: Last F/W revision was 4.50.0
isp0: 243 max I/O commands supported
isp0: driver initiated bus reset of bus 0
scsibus0 at isp0: 16 targets, 8 luns per target
ahc1 at pci0 dev 18 function 0
ahc1: interrupting at apic 2 int 18 (irq 14)
ahc1: Reading SEEPROM...done.
ahc1: Low byte termination Enabled
ahc1: High byte termination Enabled
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus1 at ahc1 channel 0: 16 targets, 8 luns per target
adw0 at pci0 dev 19 function 0: AdvanSys ASB-3940U2W-00 SCSI adapter
adw0: interrupting at apic 2 int 19 (irq 9)
scsibus2 at adw0: 16 targets, 8 luns per target
isa0 at pcib0
ep0 at isa0 port 0x300-0x30f irq 11: 3Com 3C509 Ethernet
ep0: address 00:20:af:4f:32:13, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10base2)
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
lptprobe: mask ff data 55 failed
lptprobe: mask ff data 55 failed
seaprobe: board type unknown at address 0xc8000
pcppi0 at isa0 port 0x61
midi1 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
biomask 0 netmask 0 ttymask 0
cpu0: prelint0 700<vector=0,delmode=7,dest=0> 0<target=0>
cpu0: prelint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: timer0 300d0<vector=d0,delmode=0,masked,dest=0> 0<target=0>
cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu0: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: enabling
ioapic0: int0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
ioapic0: int1 1a0<vector=a0,delmode=1,dest=0> 0<target=0>
ioapic0: int2 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int3 1e1<vector=e1,delmode=1,dest=0> 0<target=0>
ioapic0: int4 1e2<vector=e2,delmode=1,dest=0> 0<target=0>
ioapic0: int5 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int6 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int7 1a1<vector=a1,delmode=1,dest=0> 0<target=0>
ioapic0: int8 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int9 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int10 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int11 181<vector=81,delmode=1,dest=0> 0<target=0>
ioapic0: int12 1a2<vector=a2,delmode=1,dest=0> 0<target=0>
ioapic0: int13 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int14 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int15 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int16 a1c0<vector=c0,delmode=1,actlo,level,dest=0> 0<target=0>
ioapic0: int17 a170<vector=70,delmode=1,actlo,level,dest=0> 0<target=0>
ioapic0: int18 a171<vector=71,delmode=1,actlo,level,dest=0> 0<target=0>
ioapic0: int19 a172<vector=72,delmode=1,actlo,level,dest=0> 0<target=0>
ioapic0: int20 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int21 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int22 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int23 200<vector=0,delmode=2,dest=0> 0<target=0>
scsibus0: waiting 2 seconds for devices to settle...
isp0: Bus 0 Target 0 Async Mode 
sd0 at scsibus0 target 0 lun 0: <IBM-PCCO, DDRS-39130Y   !#, S97B> SCSI2 0/direct fixed
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
sd0: 8678 MB, 8387 cyl, 10 head, 211 sec, 512 bytes/sect x 17774160 sectors
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 Async Mode 
sd1 at scsibus0 target 1 lun 0: <IBM, DGHS09U, 0350> SCSI3 0/direct fixed
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
sd1: 8748 MB, 8152 cyl, 10 head, 219 sec, 512 bytes/sect x 17916240 sectors
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 2 Async Mode 
sd2 at scsibus0 target 2 lun 0: <IBM-PCCO, DDRS-39130Y   !#, S97B> SCSI2 0/direct fixed
isp0: Bus 0 Target 2 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
sd2: 8678 MB, 8387 cyl, 10 head, 211 sec, 512 bytes/sect x 17774160 sectors
isp0: Bus 0 Target 2 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 2 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 2 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 2 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 2 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 2 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 2 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
scsibus1: waiting 2 seconds for devices to settle...
ahc1: target 1 synchronous at 10.0MHz, offset = 0xf
cd0 at scsibus1 target 1 lun 0: <MATSHITA, PD-2 LF-D100, A113> SCSI2 5/cdrom removable
scsibus2: waiting 2 seconds for devices to settle...
adw0: target 1 using 16-bits wide, 40.0 MHz synchronous transfers
sd3 at scsibus2 target 1 lun 0: <IBM, DGHS18D, 03E0> SCSI3 0/direct fixed
sd3: 17501 MB, 8154 cyl, 20 head, 219 sec, 512 bytes/sect x 35843670 sectors
adw0: target 6 using 16-bits wide, 40.0 MHz synchronous transfers
sd4 at scsibus2 target 6 lun 0: <QUANTUM, QM318000TD-SW, N491> SCSI2 0/direct fixed
sd4: 17366 MB, 8057 cyl, 20 head, 220 sec, 512 bytes/sect x 35566500 sectors
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 2 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 2 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 2 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
boot device: sd0
root on sd0a dumps on sd0b
isp0: Bus 0 Target 2 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
mountroot: trying coda...
mountroot: trying msdos...
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
mountroot: trying cd9660...
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
mountroot: trying ntfs...
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
mountroot: trying nfs...
mountroot: trying lfs...
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
mountroot: trying ext2fs...
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
mountroot: trying ffs...
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
root file system type: ffs
cpu1: starting
cpu1: prelint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: prelint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: timer0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu1: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu1: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: CPU 1 running
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11