Subject: Intel L440GX+ Server Board + two PIII 650 Mhz
To: None <tech-smp@netbsd.org>
From: None <trout@sasq.net>
List: tech-smp
Date: 05/26/2000 13:33:02
netbsd-GENERIC.MP

>> NetBSD/i386 BIOS Boot, Revision 2.6
>> (perry@snark.piermont.com, Sun Apr 16 16:17:14 EDT 2000)
>> Memory: 638/261056 k
Use hd1a:netbsd to boot sd0 when wd0 is also installed
Press return to boot now, any other key for boot menu
booting sd0a:netbsd - starting in 0
type "?" or "help" for help.
boot: (invalid): Invalid argument
> boot sd0a:mp
booting sd0a:mp
3356308+241524+298060 [65+218336+175378]=0x418fbc
[ preserving 394236 bytes of netbsd ELF symbol table ]

Copyright (c) 1996, 1997, 1998, 1999, 2000

    The NetBSD Foundation, Inc.  All rights reserved.

Copyright (c) 1982, 1986, 1989, 1991, 1993

    The Regents of the University of California.  All rights reserved.


202 pool entries; page size 4096

WARNING: static pool `pmaptlbpl' dropped below low water mark

NetBSD 1.4T (GENERIC.MP) #7: Tue Feb 29 09:44:21 EST 2000

    wes@thunk:/usr/wes/current/src/sys/arch/i386/compile/GENERIC.MP

total memory = 255 MB

avail memory = 229 MB

using 3296 buffers containing 13184 KB of memory

biostramp installed @ 1000

BIOS32 rev. 0 found at 0xfd7e3

mainbus0 (root)

mainbus0: scanning 0x9f800 to 0x9fbf0 for MP signature

mainbus0: scanning 0x9f400 to 0x9f7f0 for MP signature

mainbus0: scanning 0xf0000 to 0xffff0 for MP signature

mainbus0: MP floating pointer found in bios at 0xf6b40

mainbus0: MP config table at 0x9f960, 276 bytes long

mainbus0: Intel MP Specification (Version 1.4)

mainbus0: MP OEM INTEL    Product Lancewood   

cpu0 at mainbus0: apid 1 (boot processor)

cpu0: family 6 model 8 step 1

cpu0: Intel Pentium III (E) (686-class)

cpu0: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>

cpu0: features 387fbff<PGE,MCA,CMOV,FGPAT,PSE36,PN,MMX,FXSR,XMM>

cpu0: calibrating local timer

cpu0: apic clock running at 99 MHz

cpu0: kstack at 0xd258c000 for 8192 bytes

cpu0: idle pcb at 0xd258c000, idle sp at 0xd258dfa0

cpu1 at mainbus0: apid 0 (application processor)

cpu1: family 6 model 8 step 1

cpu1: Intel Pentium III (E) (686-class)

cpu1: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>

cpu1: features 387fbff<PGE,MCA,CMOV,FGPAT,PSE36,PN,MMX,FXSR,XMM>

cpu1: kstack at 0xd258e000 for 8192 bytes

cpu1: idle pcb at 0xd258e000, idle sp at 0xd258ffa0

ioapic0 at mainbus0 apid 2 (I/O APIC)

ioapic0: pa 0xfec00000, virtual wire mode, version 11, 24 pins

ioapic0: int0 attached to ExtINT (type 3<type=3=ExtINT> flags 5<pol=1=Act
Hi,trig=1=Edge>)

ioapic0: int1 attached to isa0 irq 1 (type 0<type=0> flags 5<pol=1=Act
Hi,trig=1=Edge>)

ioapic0: int2 attached to isa0 irq 0 (type 0<type=0> flags 5<pol=1=Act
Hi,trig=1=Edge>)

ioapic0: int3 attached to isa0 irq 3 (type 0<type=0> flags 5<pol=1=Act
Hi,trig=1=Edge>)

ioapic0: int4 attached to isa0 irq 4 (type 0<type=0> flags 5<pol=1=Act
Hi,trig=1=Edge>)

ioapic0: int5 attached to isa0 irq 5 (type 0<type=0> flags 5<pol=1=Act
Hi,trig=1=Edge>)

ioapic0: int6 attached to isa0 irq 6 (type 0<type=0> flags 5<pol=1=Act
Hi,trig=1=Edge>)

ioapic0: int7 attached to isa0 irq 7 (type 0<type=0> flags 5<pol=1=Act
Hi,trig=1=Edge>)

ioapic0: int8 attached to isa0 irq 8 (type 0<type=0> flags 5<pol=1=Act
Hi,trig=1=Edge>)

ioapic0: int12 attached to isa0 irq 12 (type 0<type=0> flags 5<pol=1=Act
Hi,trig=1=Edge>)

ioapic0: int13 attached to isa0 irq 13 (type 0<type=0> flags 5<pol=1=Act
Hi,trig=1=Edge>)

ioapic0: int14 attached to isa0 irq 14 (type 0<type=0> flags 5<pol=1=Act
Hi,trig=1=Edge>)

ioapic0: int15 attached to isa0 irq 15 (type 0<type=0> flags 5<pol=1=Act
Hi,trig=1=Edge>)

ioapic0: int19 attached to pci0 device 12 INT_A (type 0<type=0> flags
f<pol=3=Act Lo,trig=3=Level>)

ioapic0: int19 attached to pci0 device 12 INT_A (type 0<type=0> flags
f<pol=3=Act Lo,trig=3=Level>)

ioapic0: int21 attached to pci0 device 14 INT_A (type 0<type=0> flags
f<pol=3=Act Lo,trig=3=Level>)

ioapic0: int21 attached to pci0 device 18 INT_D (type 0<type=0> flags
f<pol=3=Act Lo,trig=3=Level>)

local apic: int0 attached to ExtINT (type 3<type=3=ExtINT> flags
5<pol=1=Act Hi,trig=1=Edge>)

local apic: int1 attached to NMI (type 1<type=1=NMI> flags 5<pol=1=Act
Hi,trig=1=Edge>)

mainbus0: MP WARNING: 164 bytes of extended entries not examined

pci0 at mainbus0 bus 0: configuration mode 1

pci0: i/o space, memory space enabled

pchb0 at pci0 dev 0 function 0

pchb0: Intel product 0x71a0 (rev. 0x00)

ppb0 at pci0 dev 1 function 0: Intel product 0x71a1 (rev. 0x00)

pci1 at ppb0 bus 1

pci1: i/o space, memory space enabled

ppb1 at pci1 dev 15 function 0: Digital Equipment product 0x0023
(rev. 0x06)

pci2 at ppb1 bus 2

pci2: i/o space, memory space enabled

Adaptec (2nd PCI Vendor ID) AIC-7896/7 (SCSI mass storage) at pci0 dev 12
function 0 not configured

Adaptec (2nd PCI Vendor ID) AIC-7896/7 (SCSI mass storage) at pci0 dev 12
function 1 not configured

fxp0 at pci0 dev 14 function 0: Intel i82557 Ethernet, rev 8

fxp0: interrupting at apic 2 int 21 (irq 10)

fxp0: detected 64 word EEPROM

fxp0: Ethernet address 00:90:27:6a:55:f0, 10/100 Mb/s

inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4

inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

fxp0: supplying EUI64: 00:90:27:ff:fe:6a:55:f0

pcib0 at pci0 dev 18 function 0

pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)

pciide0 at pci0 dev 18 function 1: Intel 82371AB IDE controller (PIIX4)

pciide0: bus-master DMA support present

pciide0: primary channel wired to compatibility mode

pciide0: disabling primary channel (no drives)

pciide0: secondary channel wired to compatibility mode

pciide0: disabling secondary channel (no drives)

uhci0 at pci0 dev 18 function 2: Intel 82371AB USB Host Controller
(PIIX4) (rev. 0x01)

uhci0: interrupting at apic 2 int 21 (irq 10)

usb0 at uhci0: USB revision 1.0

uhub0 at usb0

uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub0: 2 ports with 2 removable, self powered

Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge,
revision 0x02) at pci0 dev 18 function 3 not configured

vga1 at pci0 dev 20 function 0: Cirrus Logic CL-GD5480 (rev. 0x23)

wsdisplay0 at vga1

isa0 at pcib0

com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo

com0: console

com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo

pckbc0 at isa0 port 0x60-0x64

pckbdprobe: reset error 5

pmsprobe: reset error 5

pmsiprobe: reset error 5

lpt0 at isa0 port 0x378-0x37b irq 7

lptprobe: mask ff data 55 failed

lptprobe: mask ff data 55 failed

seaprobe: board type unknown at address 0xc8000

pcppi0 at isa0 port 0x61

midi0 at pcppi0: PC speaker

sysbeep0 at pcppi0

isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support

npx0 at isa0 port 0xf0-0xff: using exception 16

fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2

fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec

isapnp0: no ISA Plug 'n Play devices found

biomask 0 netmask 0 ttymask 0

cpu0: prelint0 700<vector=0,delmode=7,dest=0> 0<target=0>

cpu0: prelint1 400<vector=0,delmode=4,dest=0> 0<target=0>

cpu0: timer0 300d0<vector=d0,delmode=0,masked,dest=0> 0<target=0>

cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>

cpu0: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>

cpu0: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>

cpu0: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>

ioapic0: enabling

ioapic0: int0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>

ioapic0: int1 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>

ioapic0: int2 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>

panic: apic_vectorset: no free vectors

Stopped in swapper at   cpu_Debugger+0x4:       leave

(cpu 1)db> 

===============================================================
DMESG Output

nit# dmesg 
NetBSD 1.4Y (GENERIC) #1: Fri May 26 09:51:00 PDT 2000
    admin@nit.sasquatch.com:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: family 6 model 8 step 1
cpu0: Intel Pentium III (E) (686-class)
total memory = 255 MB
avail memory = 232 MB
using 3296 buffers containing 13184 KB of memory
BIOS32 rev. 0 found at 0xfd7e3
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x71a0 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: Intel product 0x71a1 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 15 function 0: Digital Equipment product 0x0023
(rev. 0x06)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ahc1 at pci0 dev 12 function 0
ahc1: interrupting at irq 11
ahc1: aic7896/97 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1 channel 0: 16 targets, 8 luns per target
ahc2 at pci0 dev 12 function 1
ahc2: interrupting at irq 11
ahc2: aic7896/97 Wide Channel B, SCSI Id=7, 16/255 SCBs
scsibus1 at ahc2 channel 0: 16 targets, 8 luns per target
fxp0 at pci0 dev 14 function 0: Intel i82557 Ethernet, rev 8
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:90:27:6a:55:f0, 10/100 Mb/s
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 18 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 18 function 1: Intel 82371AB IDE controller
(PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
pciide0: disabling primary channel (no drives)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
uhci0 at pci0 dev 18 function 2: Intel 82371AB USB Host Controller
(PIIX4) (rev. 0x01)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge,
revision 0x02) at pci0 dev 18 function 3 not configured
vga1 at pci0 dev 20 function 0: Cirrus Logic CL-GD5480 (rev. 0x23)
wsdisplay0 at vga1
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask ff67 netmask ff67 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
ahc2: target 0 using 16bit transfers
ahc2: target 0 synchronous at 20.0MHz, offset = 0x1f
ahc2: target 0 using tagged queuing
sd0 at scsibus1 target 0 lun 0: <IBM, DMVS18V, 0250> SCSI3 0/direct fixed
sd0: 17501 MB, 11736 cyl, 10 head, 305 sec, 512 bytes/sect x 35843670
sectors
ums0 at uhub0 port 2 configuration 1 interface 0
ums0: Primax Electronics product 0x4d03, rev 1.00/4.41, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
nit#