Same machine as before (ALR rackmount machine, two cpus of a possible six,
EISA+PCI...)  This time it gets through the cpu and bus probing okay, but
fails to probe the drives, getting the same error as jonl gets with the
Adaptec controller...

(Ever ten-finger copied an entire msgbuf from the x/c display of ddb?
Especially if you have to boot -d and put in breakpoints to keep the
SCSI errors from scrolling the msgbuf.  One of these days I've got to
install serial bootblocks :)

I've included a failed boot, followed by a copy of the normal boot messages
for a 1.4.1 GENERIC on the same machine.  (Sorry, haven't tried a -current
non-MP GENERIC yet.)

jdarrow

-- 
John Darrow - Senior Technical Specialist               Office: 630/752-5201
Computing Services, Wheaton College, Wheaton, IL 60187  Fax:    630/752-5968
Alphapage: 6303160707@alphapage.airtouch.com            Pager:  630/316-0707
Email:     John.P.Darrow@wheaton.edu


NetBSD 1.4T (GENERIC.MP) #7: Tue Feb 29 09:44:21 EST 2000
    wes@thunk:/usr/wes/current/src/sys/arch/i386/compile/GENERIC.MP
total memory = 65152 KB
avail memory = 55340 KB
using 840 buffers containing 3360 KB of memory
biostramp installed @ 1000
BIOS32 rev. 0 found at 0xf7cee
mainbus0 (root)
mainbus0: scanning 0x9fc00 to 0x9fff0 for MP signature
mainbus0: scanning 0x9f800 to 0x9fbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xfdbc0
mainbus0: MP config table at 0x9fd50, 260 bytes long
mainbus0: Intel MP Specification (Version 1.4)
mainbus0: MP OEM ALR      Product   Revol. 6x6
cpu0 at mainbus0: apid 6 (boot processor)
cpu0: family 6 model 1 step 9
cpu0: Intel Pentium Pro (686-class)
cpu0: features fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features fbff<PGE,MCA,CMOV>
cpu0: calibrating local timer
cpu0: apic clock running at 66 MHz
cpu0: kstack at 0xc55b3000 for 8192 bytes
cpu0: idle pcb at 0xc55b3000, idle sp at 0xc55b4fa0
cpu1 at mainbus0: apid 5 (application processor)
cpu1: family 6 model 1 step 9
cpu1: Intel Pentium Pro (686-class)
cpu1: features fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features fbff<PGE,MCA,CMOV>
cpu1: kstack at 0xc55b5000 for 8192 bytes
cpu1: idle pcb at 0xc55b5000, idle sp at 0xc55b6fa0
ioapic0 at mainbus0 apid 0 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 11, 16 pins
ioapic0: int0 attached to ExtINT (type 3<type=3=ExtINT> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int1 attached to eisa2 EISA irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int2 attached to eisa2 EISA irq 2 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int3 attached to eisa2 EISA irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int4 attached to eisa2 EISA irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int5 attached to eisa2 EISA irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int6 attached to eisa2 EISA irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int7 attached to eisa2 EISA irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int8 attached to eisa2 EISA irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int9 attached to eisa2 EISA irq 9 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int10 attached to eisa2 EISA irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int11 attached to eisa2 EISA irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int12 attached to eisa2 EISA irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int13 attached to eisa2 EISA irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int14 attached to eisa2 EISA irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int15 attached to eisa2 EISA irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
local apic: int0 attached to ExtINT (type 3<type=3=ExtINT> flags 5<pol=1=Act Hi,trig=1=Edge>)
local apic: int1 attached to NMI (type 1<type=1=NMI> flags 5<pol=1=Act Hi,trig=1=Edge>)
mainbus0: MP WARNING: 120 bytes of extended entries not examined
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pceb0 at pci0 dev 2 function 0
pceb0: Intel 82375EB/SB PCI-EISA Bridge (PCEB) (rev. 0x15)
pciide0 at pci0 dev 3 function 0: Symphony Labs 82C105 (rev. 0x06)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to compatibility mode
pciide0: primary channel ignored (not responding; disabled or no drives?)
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel ignored (not responding; disabled or no drives?)
vga1 at pci0 dev 12 function 0: Cirrus Logic CL-GD5446 (rev. 0x00)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
fxp0 at pci0 dev 15 function 0: Intel i82557 Ethernet, rev 1
pci_intr_map: no MP mapping found
isa_intr_establish: no MP mapping found
fxp0: interrupting at irq 10
fxp0: detected 64 word EEPROM
fxp0: Ethernet address xx:xx:xx:xx:xx:xx, 10/100 Mb/s
nsphy0 at fxp0 phy 1: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: supplying EUI64: xx:xx:xx:xx:xx:xx:xx:xx
Intel 82451KX/GX Memory Controller (MC) (RAM memory, revision 0x05) at pci0 dev 20 function 0 not configured
pchb0 at pci0 dev 25 function 0
pchb0: Intel 82454KX/GX PCI Bridge (PB) (rev. 0x06)
pchb0: Compatibility PB (bus 0)
pchb1 at pci0 dev 26 function 0
pchb1: Intel 82454KX/GX PCI Bridge (PB) (rev. 0x06)
pchb1: Auxiliary PB (bus 1)
pci1 at pchb1 bus 1
pci1: i/o space, memory space enabled
ahc1 at pci1 dev 11 function 0
pci_intr_map: no MP mapping found
isa_intr_establish: no MP mapping found
ahc1: interrupting at irq 9
ahc1: Reading SEEPROM...done.
ahc1: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc1: Resetting Channel A
ahc1: Downloading Sequencer Program...Done
scsibus0 at ahc1 channel 0: 16 targets, 8 luns per target
eisa0 at pceb0
eisa0: can't map I/O space for slot 15
isa0 at pceb0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
isa_intr_establish: no MP mapping found
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isa_intr_establish: no MP mapping found
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
isa_intr_establish: no MP mapping found
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsiprobe: intellimode -> 6
pms0 at pckbc0 (aux slot)
isa_intr_establish: no MP mapping found
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x37a-0x37b irq 7
isa_intr_establish: no MP mapping found
lptprobe: mask ff data 55 failed
lptprobe: mask ff data 55 failed
seaprobe: board type unknown at address 0xc8000
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isa_intr_establish: no MP mapping found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask eb65 netmask ef65 ttymask ffe7
cpu0: prelint0 700<vector=0,delmode=7,dest=0> 0<target=0>
cpu0: prelint1 400<vector=0,delmode=1,dest=0> 0<target=0>
cpu0: timer0 300d0<vector=d0,delmode=0,masked,dest=0> 0<target=0>
cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu0: lint1 400<vector=0,delmode=1,dest=0> 0<target=0>
cpu0: error0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: enabling
ioapic0: int0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
ioapic0: int1 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int2 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int3 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int4 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int5 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int6 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int7 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int8 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int9 18100<vector=0,delmode=1,level,masked,dest=0> 0<target=0>
ioapic0: int10 18100<vector=0,delmode=1,level,masked,dest=0> 0<target=0>
ioapic0: int11 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int12 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int13 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int14 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int15 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
scsibus0: waiting 2 seconds for devices to settle...
probe(ahc1:0:0): timed out in message in phase, SCSISIGI == 0xb6
probe(ahc1:0:0): asserted ATN - device reset in message buffer
probe(ahc1:0:0): timed out in message in phase, SCSISIGI == 0xbd
ahc1: Issued Channel A Bus Reset #1. 1 SCBs aborted
probe(ahc1:0:0): timed out in message in phase, SCSISIGI == 0x0
probe(ahc1:0:0): asserted ATN - device reset in message buffer
probe(ahc1:0:0): timed out in message in phase, SCSISIGI == 0xc
ahc1: Issued Channel A Bus Reset #1. 1 SCBs aborted
...
Repeats last 4 lines 10 times for each target 0-15, except the controller (7)
...
probe(ahc1:15:0): timed out in message in phase, SCSISIGI == 0x0
probe(ahc1:15:0): asserted ATN - device reset in message buffer
probe(ahc1:15:0): timed out in message in phase, SCSISIGI == 0xc
ahc1: Issued Channel A Bus Reset #1. 1 SCBs aborted
boot device: <unknown>
root device: 
use one of: fxp0 fd0[a-h] halt
root device: halt
syncing disks... done

The operation system has halted.
Please press any key to reboot.

NetBSD 1.4.1 (GENERIC) #1: Tue Aug 10 00:03:09 MEST 1999
    fvdl@struis:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: family 6 model 1 step 9
cpu0: Intel Pentium Pro (686-class)
real mem  = 66715648
avail mem = 58339328
using 840 buffers containing 3440640 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pceb0 at pci0 dev 2 function 0
pceb0: Intel 82375EB/SB PCI-EISA Bridge (PCEB) (rev. 0x15)
pciide0 at pci0 dev 3 function 0: Symphony Labs 82C105 (rev. 0x06)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to compatibility mode
pciide0: primary channel ignored (not responding; disabled or no drives?)
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel ignored (not responding; disabled or no drives?)
vga1 at pci0 dev 12 function 0: Cirrus Logic CL-GD5446 (rev. 0x00)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
fxp0 at pci0 dev 15 function 0: Intel EtherExpress Pro 10+/100B Ethernet
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:a0:c9:25:a5:c0
nsphy0 at fxp0 phy 1: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Intel 82451KX/GX Memory Controller (MC) (RAM memory, revision 0x05) at pci0 dev 20 function 0 not configured
pchb0 at pci0 dev 25 function 0
pchb0: Intel 82454KX/GX PCI Bridge (PB) (rev. 0x06)
pchb0: Compatibility PB (bus 0)
pchb1 at pci0 dev 26 function 0
pchb1: Intel 82454KX/GX PCI Bridge (PB) (rev. 0x06)
pchb1: Auxiliary PB (bus 1)
pci1 at pchb1 bus 1
pci1: i/o enabled, memory enabled
ahc1 at pci1 dev 11 function 0
ahc1: interrupting at irq 9
ahc1: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
scsibus0 at ahc1 channel 0: 16 targets, 8 luns per target
ahc1: target 0 using 16Bit transfers
ahc1: target 0 synchronous at 20.0MHz, offset = 0x8
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST39173W, 6244> SCSI2 0/direct fixed
sd0: 8683MB, 7501 cyl, 10 head, 237 sec, 512 bytes/sect x 17783240 sectors
ahc1: target 5 synchronous at 4.0MHz, offset = 0xf
cd0 at scsibus0 targ 5 lun 0: <TOSHIBA, CD-ROM XM-5401TA, 3605> SCSI2 5/cdrom removable
eisa0 at pceb0
eisa0: can't map I/O space for slot 15
isa0 at pceb0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
opms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask 240 netmask 640 ttymask 16c2
wscons: wskbd0 glued to wsdisplay0 (console)
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs