C'est un message de format MIME en plusieurs parties.

------=_NextPart_000_002B_01BF8050.BF855AB0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Hi !

On my home, same board with dual-Celeron give same result.
I drop into db, where 'c' could resume the boot process, and I could dump
dmesg.
But I've got a couple of error when mounting msdos floppy (not really
important for now).

Enjoy.
----- Original Message -----
From: "Ken Nakata" <kenn@synap.ne.jp>
To: <sommerfeld@netbsd.org>
Cc: <tech-smp@netbsd.org>
Sent: Saturday, February 26, 2000 6:52 AM
Subject: Re: pre-built i386 + MP spinup test kernels now available.


> Hi Bill,
>
> On Wed, 23 Feb 2000 09:49:37 -0500, Bill Sommerfeld
<sommerfeld@netbsd.org> wrote:
> >
> > Please send reports of how far these manage to boot on your systems to
> > sommerfeld@netbsd.org and/or tech-smp@netbsd.org.
> >
> > dmesg output from a successful boot (or an unsuccessful boot, for that
> > matter) would be appreciated.
>
> MSI MS-6120N dual slot1 motherboard with dual pen3 (family 6 model 7
> step 3).  Tried to boot netbsd-GENERIC.MP and got this:
>
> [...]
> root file system type: ffs
> cpu1: starting
> cpu1: init idle stack prt is 0xc9af1fa0
> cpu failed to become ready
> Stopped in swapper at cpu_Debugger+0x4:  leave
> (cpu 0)db>t
> cpu_Debugger(...
> cpu_boot_secondary(...
> cpu_boot_secondary_processors(...
> main(...
> (cpu 0)db>_
>
> If there's anything else you want to know, please let me know.
>
> Ken

------=_NextPart_000_002B_01BF8050.BF855AB0
Content-Type: text/plain;
	name="MSI6120.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="MSI6120.txt"

NetBSD 1.4T (INSTALL.MP) #3: Wed Feb 23 09:06:29 EST 2000
    wes@thunk:/usr/wes/current/src/sys/arch/i386/compile/INSTALL.MP
total memory =3D 191 MB
avail memory =3D 171 MB
using 2477 buffers containing 9908 KB of memory
biostramp installed @ 1000
BIOS32 rev. 0 found at 0xfdb70
mainbus0 (root)
mainbus0: scanning 0x9fc00 to 0x9fff0 for MP signature
mainbus0: scanning 0x9f800 to 0x9fbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xfb4b0
mainbus0: MP config table at 0xf7250, 308 bytes long
mainbus0: Intel MP Specification (Version 1.4)
mainbus0: MP OEM MSI      Product 440BX      =20
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: family 6 model 6 step 5
cpu0: Intel Pentium II (Celeron) (686-class)
cpu0: features 183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 183fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX,FXSR>
cpu0: calibrating local timer
cpu0: apic clock running at 75 MHz
cpu0: kstack at 0xce01b000 for 8192 bytes
cpu0: idle pcb at 0xce01b000, idle sp at 0xce01cfa0
cpu1 at mainbus0: apid 1 (application processor)
cpu1: family 6 model 6 step 5
cpu1: Intel Pentium II (Celeron) (686-class)
cpu1: features 183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 183fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX,FXSR>
cpu1: kstack at 0xce01d000 for 8192 bytes
cpu1: idle pcb at 0xce01d000, idle sp at 0xce01efa0
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 11, 24 pins
ioapic0: int0 attached to ExtINT (type 3<type=3D3=3DExtINT> flags =
0<pol=3D0,trig=3D0>)
ioapic0: int1 attached to isa0 irq 1 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)
ioapic0: int2 attached to isa0 irq 0 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)
ioapic0: int3 attached to isa0 irq 3 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)
ioapic0: int4 attached to isa0 irq 4 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)
ioapic0: int5 attached to isa0 irq 5 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)
ioapic0: int6 attached to isa0 irq 6 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)
ioapic0: int7 attached to isa0 irq 7 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)
ioapic0: int8 attached to isa0 irq 8 (type 0<type=3D0> flags =
5<pol=3D1=3DAct Hi,trig=3D1=3DEdge>)
ioapic0: int9 attached to isa0 irq 9 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)
ioapic0: int10 attached to isa0 irq 10 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)
ioapic0: int11 attached to isa0 irq 11 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)
ioapic0: int12 attached to isa0 irq 12 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)
ioapic0: int13 attached to isa0 irq 13 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)
ioapic0: int14 attached to isa0 irq 14 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)
ioapic0: int15 attached to isa0 irq 15 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)
ioapic0: int16 attached to pci0 device 18 INT_A (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)
ioapic0: int16 attached to pci0 device 9 INT_B (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)
ioapic0: int16 attached to pci0 device 9 INT_A (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)
ioapic0: int17 attached to pci0 device 14 INT_A (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)
ioapic0: int19 attached to pci0 device 16 INT_A (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)
ioapic0: int23 attached to SMI (type 2<type=3D2=3DSMI> flags =
0<pol=3D0,trig=3D0>)
local apic: int0 attached to ExtINT (type 3<type=3D3=3DExtINT> flags =
0<pol=3D0,trig=3D0>)
local apic: int1 attached to NMI (type 1<type=3D1=3DNMI> flags =
0<pol=3D0,trig=3D0>)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7190 (rev. 0x03)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7191 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DJNA-371350>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 12949 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 26520480 =
sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data =
transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <Pioneer DVD-ROM ATAPIModel DVD-103S 011, , =
E1.15> type 5 cdrom removable
cd0: 32-bits data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data =
transfers)
vendor 0x8086 product 0x7112 (USB serial bus, revision 0x01) at pci0 dev =
7 function 2 not configured
vendor 0x8086 product 0x7113 (miscellaneous bridge, revision 0x02) at =
pci0 dev 7 function 3 not configured
vendor 0x9004 product 0x7895 (SCSI mass storage, revision 0x04) at pci0 =
dev 9 function 0 not configured
vendor 0x9004 product 0x7895 (SCSI mass storage, revision 0x04) at pci0 =
dev 9 function 1 not configured
vendor 0x102b product 0x051b (VGA display) at pci0 dev 14 function 0 not =
configured
vendor 0x121a product 0x0002 (video multimedia, revision 0x02) at pci0 =
dev 15 function 0 not configured
vendor 0x1105 product 0x8300 (miscellaneous multimedia, revision 0x02) =
at pci0 dev 16 function 0 not configured
vendor 0x1102 product 0x0002 (audio multimedia, revision 0x04) at pci0 =
dev 18 function 0 not configured
vendor 0x1102 product 0x7002 (miscellaneous input, revision 0x01) at =
pci0 dev 18 function 1 not configured
isa0 at pcib0
3COM 3C509B Ethernet card in PnP mode
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
seaprobe: board type unknown at address 0xc8000
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x203
ep1 at isapnp0 port 0x210/16 irq 3
ep1: 3Com 3C509B EtherLink III=20
ep1: supplying EUI64: 00:60:97:ff:fe:ce:27:64
ep1: address 00:60:97:ce:27:64, 8KB byte-wide FIFO, 1:1 Rx:Tx split
ep1: 10baseT, 10base2 (default 10base2)
biomask 0 netmask 0 ttymask 0
cpu0: prelint0 700<vector=3D0,delmode=3D7,dest=3D0> 0<target=3D0>
cpu0: prelint1 400<vector=3D0,delmode=3D4,dest=3D0> 0<target=3D0>
cpu0: timer0 300d0<vector=3Dd0,delmode=3D0,masked,dest=3D0> =
0<target=3D0>
cpu0: pcint0 10000<vector=3D0,delmode=3D0,masked,dest=3D0> 0<target=3D0>
cpu0: lint0 10700<vector=3D0,delmode=3D7,masked,dest=3D0> 0<target=3D0>
cpu0: lint1 400<vector=3D0,delmode=3D4,dest=3D0> 0<target=3D0>
cpu0: err0 1000f<vector=3Df,delmode=3D0,masked,dest=3D0> 0<target=3D0>
ioapic0: enabling
ioapic0: int0 10700<vector=3D0,delmode=3D7,masked,dest=3D0> =
0<target=3D0>
ioapic0: int1 1a0<vector=3Da0,delmode=3D1,dest=3D0> 0<target=3D0>
ioapic0: int2 10100<vector=3D0,delmode=3D1,masked,dest=3D0> =
0<target=3D0>
ioapic0: int3 1e1<vector=3De1,delmode=3D1,dest=3D0> 0<target=3D0>
ioapic0: int4 1e2<vector=3De2,delmode=3D1,dest=3D0> 0<target=3D0>
ioapic0: int5 10100<vector=3D0,delmode=3D1,masked,dest=3D0> =
0<target=3D0>
ioapic0: int6 170<vector=3D70,delmode=3D1,dest=3D0> 0<target=3D0>
ioapic0: int7 10100<vector=3D0,delmode=3D1,masked,dest=3D0> =
0<target=3D0>
ioapic0: int8 10100<vector=3D0,delmode=3D1,masked,dest=3D0> =
0<target=3D0>
ioapic0: int9 10100<vector=3D0,delmode=3D1,masked,dest=3D0> =
0<target=3D0>
ioapic0: int10 10100<vector=3D0,delmode=3D1,masked,dest=3D0> =
0<target=3D0>
ioapic0: int11 10100<vector=3D0,delmode=3D1,masked,dest=3D0> =
0<target=3D0>
ioapic0: int12 10100<vector=3D0,delmode=3D1,masked,dest=3D0> =
0<target=3D0>
ioapic0: int13 10100<vector=3D0,delmode=3D1,masked,dest=3D0> =
0<target=3D0>
ioapic0: int14 171<vector=3D71,delmode=3D1,dest=3D0> 0<target=3D0>
ioapic0: int15 172<vector=3D72,delmode=3D1,dest=3D0> 0<target=3D0>
ioapic0: int16 1a100<vector=3D0,delmode=3D1,actlo,level,masked,dest=3D0> =
0<target=3D0>
ioapic0: int17 1a100<vector=3D0,delmode=3D1,actlo,level,masked,dest=3D0> =
0<target=3D0>
ioapic0: int18 10000<vector=3D0,delmode=3D0,masked,dest=3D0> =
0<target=3D0>
ioapic0: int19 1a100<vector=3D0,delmode=3D1,actlo,level,masked,dest=3D0> =
0<target=3D0>
ioapic0: int20 10000<vector=3D0,delmode=3D0,masked,dest=3D0> =
0<target=3D0>
ioapic0: int21 10000<vector=3D0,delmode=3D0,masked,dest=3D0> =
0<target=3D0>
ioapic0: int22 10000<vector=3D0,delmode=3D0,masked,dest=3D0> =
0<target=3D0>
ioapic0: int23 200<vector=3D0,delmode=3D2,dest=3D0> 0<target=3D0>
md0: internal 1587K image area
wd0: no disk label
boot device: fd0
root on md0a dumps on md0b
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
cpu1: starting
cpu1: init idle stack ptr is 0xce01efa0
cpu failed to become ready
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11
simple_lock: locking against myself
lock: 0xc04c9ab8, currently at: ../../../../msdosfs/msdosfs_denode.c:120
on cpu 0
last locked: ../../../../msdosfs/msdosfs_denode.c:105
simple_lock: locking against myself
lock: 0xc04c9ab8, currently at: ../../../../msdosfs/msdosfs_denode.c:131
on cpu 0
last locked: ../../../../msdosfs/msdosfs_denode.c:105
simple_lock: locking against myself
lock: 0xc04c9ab8, currently at: ../../../../msdosfs/msdosfs_denode.c:120
on cpu 0
last locked: ../../../../msdosfs/msdosfs_denode.c:105
last unlocked: ../../../../msdosfs/msdosfs_denode.c:114
simple_lock: locking against myself
lock: 0xc04c9ab8, currently at: ../../../../msdosfs/msdosfs_denode.c:131
on cpu 0
last locked: ../../../../msdosfs/msdosfs_denode.c:105
last unlocked: ../../../../msdosfs/msdosfs_denode.c:114

------=_NextPart_000_002B_01BF8050.BF855AB0--