Subject: Re: pre-built i386 + MP spinup test kernels now available.
To: Bill Sommerfeld <>
From: matt <>
List: tech-smp
Date: 02/23/2000 17:38:02
from my quad ppro box: the boot processor is ID 3, unfortunately.  i'm
not sure if that relates to the uvm fault.

>> NetBSD/i386 BIOS Boot, Revision 2.6
>> (, Wed Feb 23 15:54:31 EST 2000)
>> Memory: 639/130048 k
Use hd1a:netbsd to boot sd0 when wd0 is also installed
Press return to boot now, any other key for boot menu
[blah blah]
[ netbsd ELF symbol table not valid ]
[ netbsd a.out symbol table not valid ]
[ no symbol table formats found ]
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

202 pool entries; page size 4096
WARNING: static pool `pmaptlbpl' dropped below low water mark
NetBSD 1.4T (INSTALL.MP) #4: Wed Feb 23 16:27:25 EST 2000
total memory = 127 MB
avail memory = 112 MB
using 1659 buffers containing 6636 KB of memory
biostramp installed @ 1000
BIOS32 rev. 0 found at 0xf7c0e
mainbus0 (root)
mainbus0: scanning 0x9fc00 to 0x9fff0 for MP signature
mainbus0: scanning 0x9f800 to 0x9fbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xfdbc0
mainbus0: MP config table at 0x9fd50, 300 bytes long
mainbus0: Intel MP Specification (Version 1.4)
mainbus0: MP OEM ALR      Product Revol. QUAD6
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: family 6 model 1 step 7
cpu0: Intel Pentium Pro (686-class)
cpu0: features fbff<PGE,MCA,CMOV>
cpu0: calibrating local timer
cpu0: apic clock running at 59 MHz
cpu0: kstack at 0xc9ad3000 for 8192 bytes
cpu0: idle pcb at 0xc9ad3000, idle sp at 0xc9ad4fa0
cpu1 at mainbus0: apid 0 (application processor)
cpu1: family 6 model 1 step 7
cpu1: Intel Pentium Pro (686-class)
cpu1: features fbff<PGE,MCA,CMOV>
cpu1: kstack at 0xc9ad5000 for 8192 bytes
cpu1: idle pcb at 0xc9ad5000, idle sp at 0xc9ad6fa0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: family 6 model 1 step 7
cpu2: Intel Pentium Pro (686-class)
cpu2: features fbff<PGE,MCA,CMOV>
cpu2: kstack at 0xc9ad7000 for 8192 bytes
cpu2: idle pcb at 0xc9ad7000, idle sp at 0xc9ad8fa0
cpu3 at mainbus0: apid 2 (application processor)
cpu3: family 6 model 1 step 7
cpu3: Intel Pentium Pro (686-class)
cpu3: features fbff<PGE,MCA,CMOV>
cpu3: kstack at 0xc9ad9000 for 8192 bytes
cpu3: idle pcb at 0xc9ad9000, idle sp at 0xc9adafa0
mainbus0: unsupported bus type EISA  
ioapic0 at mainbus0 apid 4 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 11, 16 pins
ioapic0: int0 attached to ExtINT (type 3<type=3=ExtINT> flags 5<pol=1=Act Hi,trig=1=Edge>)
uvm_fault(0xc04db4e0, 0x0, 0, 1) -> 1
fatal page fault in supervisor mode
trap type 6 code 0 eip 0 cs 8 eflags 10206 cr2 0 cpl e0
panic: trap

The operating system has halted.
Please press any key to reboot.

matt debergalis <> KB1CTH
finger for PGP key