tech-ports archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

RE: Support for Intel P3xxx(3500) series PCIe SSD



>>> Can you provide the full dmesg and say is this is an m.2?

-----------------------------

Yes

 

 

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,

    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

    The NetBSD Foundation, Inc.  All rights reserved.

Copyright (c) 1982, 1986, 1989, 1991, 1993

    The Regents of the University of California.  All rights reserved.

 

NetBSD 7.0.0_PATCH (GENERIC.201601260200Z)

total memory = 16366 MB

avail memory = 15873 MB

kern.module.path=/stand/amd64/7.0/modules

timecounter: Timecounters tick every 10.000 msec

timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100

Supermicro H8SGL (1234567890)

mainbus0 (root)

ACPI: RSDP 0xfa1f0 000024 (v02 ACPIAM)

ACPI: XSDT 0xdfea0100 00007C (v01 SMCI            20131125 MSFT 00000097)

ACPI: FACP 0xdfea0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097)

ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20131218/tbfadt-634)

ACPI: DSDT 0xdfea0640 0057E2 (v01  1A711 1A711000 00000000 INTL 20051117)

ACPI: FACS 0xdfeb2000 000040

ACPI: APIC 0xdfea0390 0000E4 (v01 112513 APIC1100 20131125 MSFT 00000097)

ACPI: MCFG 0xdfea0480 00003C (v01 112513 OEMMCFG  20131125 MSFT 00000097)

ACPI: OEMB 0xdfeb2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097)

ACPI: HPET 0xdfeaa640 000038 (v01 112513 OEMHPET  20131125 MSFT 00000097)

ACPI: SRAT 0xdfeaa680 0001A8 (v02 AMD    AGESA    00000001 AMD  00000001)

ACPI: SSDT 0xdfeaa830 002E04 (v01 A M I  POWERNOW 00000001 AMD  00000001)

ACPI: EINJ 0xdfead640 000130 (v01  AMIER AMI_EINJ 20131125 MSFT 00000097)

ACPI: BERT 0xdfead7d0 000030 (v01  AMIER AMI_BERT 20131125 MSFT 00000097)

ACPI: ERST 0xdfead800 000210 (v01  AMIER AMI_ERST 20131125 MSFT 00000097)

ACPI: HEST 0xdfeada10 0000A8 (v01  AMIER ABC_HEST 20131125 MSFT 00000097)

ACPI: All ACPI Tables successfully acquired

ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x21, 24 pins

ioapic1 at mainbus0 apid 1: pa 0xfec20000, version 0x21, 32 pins

cpu0 at mainbus0 apid 32: AMD Opteron(tm) Processor 6376                 , id 0x600f20

cpu1 at mainbus0 apid 33: AMD Opteron(tm) Processor 6376                 , id 0x600f20

cpu2 at mainbus0 apid 34: AMD Opteron(tm) Processor 6376                 , id 0x600f20

cpu3 at mainbus0 apid 35: AMD Opteron(tm) Processor 6376                 , id 0x600f20

cpu4 at mainbus0 apid 36: AMD Opteron(tm) Processor 6376                 , id 0x600f20

cpu5 at mainbus0 apid 37: AMD Opteron(tm) Processor 6376                 , id 0x600f20

cpu6 at mainbus0 apid 38: AMD Opteron(tm) Processor 6376                 , id 0x600f20

cpu7 at mainbus0 apid 39: AMD Opteron(tm) Processor 6376                 , id 0x600f20

cpu8 at mainbus0 apid 40: AMD Opteron(tm) Processor 6376                 , id 0x600f20

cpu9 at mainbus0 apid 41: AMD Opteron(tm) Processor 6376                 , id 0x600f20

cpu10 at mainbus0 apid 42: AMD Opteron(tm) Processor 6376                 , id 0x600f20

cpu11 at mainbus0 apid 43: AMD Opteron(tm) Processor 6376                 , id 0x600f20

cpu12 at mainbus0 apid 44: AMD Opteron(tm) Processor 6376                 , id 0x600f20

cpu13 at mainbus0 apid 45: AMD Opteron(tm) Processor 6376                 , id 0x600f20

cpu14 at mainbus0 apid 46: AMD Opteron(tm) Processor 6376                 , id 0x600f20

cpu15 at mainbus0 apid 47: AMD Opteron(tm) Processor 6376                 , id 0x600f20

acpi0 at mainbus0: Intel ACPICA 20131218

acpi0: X/RSDT: OemId <SMCI  ,        ,20131125>, AslId <MSFT,00000097>

acpi0: SCI interrupting at int 9

timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900

hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)

timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000

NMEM (PNP0C02) at acpi0 not configured

UMEM (PNP0C02) at acpi0 not configured

attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0

pcppi1 at acpi0 (SPKR, PNP0800): io 0x61

midi0 at pcppi1: PC speaker

sysbeep0 at pcppi1

SIOR (PNP0C02) at acpi0 not configured

OMSC (PNP0C02) at acpi0 not configured

RMSC (PNP0C02) at acpi0 not configured

UAR1 (PNP0501) at acpi0 not configured

UAR2 (PNP0501) at acpi0 not configured

PCIE (PNP0C02) at acpi0 not configured

RMEM (PNP0C01) at acpi0 not configured

acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button

ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)

ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-646)

attimer1: attached to pcppi1

ipmi0 at mainbus0

pci0 at mainbus0 bus 0: configuration mode 1

pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok

pchb0 at pci0 dev 0 function 0: vendor 0x1002 product 0x5a13 (rev. 0x02)

ppb0 at pci0 dev 2 function 0: vendor 0x1002 product 0x5a16 (rev. 0x00)

ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 5.0GT/s

ppb0: link is x4 @ 5.0GT/s

pci1 at ppb0 bus 1

pci1: i/o space, memory space enabled, rd/line, wr/inv ok

vendor 0x8086 product 0x0953 (Flash mass storage, interface 0x02, revision 0x01) at pci1 dev 0 function 0 not configured

ppb1 at pci0 dev 9 function 0: vendor 0x1002 product 0x5a1c (rev. 0x00)

ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 5.0GT/s

ppb1: link is x1 @ 2.5GT/s

pci2 at ppb1 bus 2

pci2: i/o space, memory space enabled, rd/line, wr/inv ok

wm0 at pci2 dev 0 function 0: Intel i82574L (rev. 0x00)

wm0: interrupting at ioapic1 pin 24

wm0: PCI-Express bus

wm0: 2048 words (8 address bits) SPI EEPROM

wm0: Ethernet address 0c:c4:7a:33:03:aa

makphy0 at wm0 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1

makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto

ppb2 at pci0 dev 10 function 0: vendor 0x1002 product 0x5a1d (rev. 0x00)

ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 5.0GT/s

ppb2: link is x1 @ 2.5GT/s

pci3 at ppb2 bus 3

pci3: i/o space, memory space enabled, rd/line, wr/inv ok

wm1 at pci3 dev 0 function 0: Intel i82574L (rev. 0x00)

wm1: interrupting at ioapic1 pin 23

wm1: PCI-Express bus

wm1: 2048 words (8 address bits) SPI EEPROM

wm1: Ethernet address 0c:c4:7a:33:03:ab

makphy1 at wm1 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1

makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto

ixpide0 at pci0 dev 17 function 0: ATI Technologies IXP IDE Controller (rev. 0x00)

ixpide0: bus-master DMA support present

ixpide0: primary channel configured to native-PCI mode

ixpide0: using ioapic0 pin 22 for native-PCI interrupt

atabus0 at ixpide0 channel 0

ixpide0: secondary channel configured to native-PCI mode

atabus1 at ixpide0 channel 1

ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)

ohci0: interrupting at ioapic0 pin 16

ohci0: OHCI version 1.0, legacy support

usb0 at ohci0: USB revision 1.0

ohci1 at pci0 dev 18 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)

ohci1: interrupting at ioapic0 pin 16

ohci1: OHCI version 1.0, legacy support

usb1 at ohci1: USB revision 1.0

ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)

ehci0: interrupting at ioapic0 pin 17

ehci0: dropped intr workaround enabled

ehci0: EHCI version 1.0

ehci0: companion controllers, 3 ports each: ohci0 ohci1

usb2 at ehci0: USB revision 2.0

ohci2 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)

ohci2: interrupting at ioapic0 pin 18

ohci2: OHCI version 1.0, legacy support

usb3 at ohci2: USB revision 1.0

ohci3 at pci0 dev 19 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)

ohci3: interrupting at ioapic0 pin 18

ohci3: OHCI version 1.0, legacy support

usb4 at ohci3: USB revision 1.0

ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)

ehci1: interrupting at ioapic0 pin 19

ehci1: dropped intr workaround enabled

ehci1: EHCI version 1.0

ehci1: companion controllers, 3 ports each: ohci2 ohci3

usb5 at ehci1: USB revision 2.0

piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x3d)

piixpm0: interrupting at SMI, polling

iic0 at piixpm0: I2C bus

ixpide1 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 0x00)

ixpide1: bus-master DMA support present

ixpide1: primary channel configured to compatibility mode

ixpide1: primary channel interrupting at ioapic0 pin 14

atabus2 at ixpide1 channel 0

ixpide1: secondary channel configured to compatibility mode

ixpide1: secondary channel interrupting at ioapic0 pin 15

atabus3 at ixpide1 channel 1

pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x00)

ppb3 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)

pci4 at ppb3 bus 4

pci4: i/o space, memory space enabled

vga0 at pci4 dev 4 function 0: vendor 0x102b product 0x0532 (rev. 0x0a)

wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)

wsmux1: connecting to wsdisplay0

drm at vga0 not configured

ohci4 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)

ohci4: interrupting at ioapic0 pin 18

ohci4: OHCI version 1.0, legacy support

usb6 at ohci4: USB revision 1.0

pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1600 (rev. 0x00)

pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1601 (rev. 0x00)

pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1602 (rev. 0x00)

amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration

amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family15h)

pchb4 at pci0 dev 24 function 4: vendor 0x1022 product 0x1604 (rev. 0x00)

pchb5 at pci0 dev 24 function 5: vendor 0x1022 product 0x1605 (rev. 0x00)

pchb6 at pci0 dev 25 function 0: vendor 0x1022 product 0x1600 (rev. 0x00)

pchb7 at pci0 dev 25 function 1: vendor 0x1022 product 0x1601 (rev. 0x00)

pchb8 at pci0 dev 25 function 2: vendor 0x1022 product 0x1602 (rev. 0x00)

amdnb_misc1 at pci0 dev 25 function 3: AMD NB Misc Configuration

amdtemp1 at amdnb_misc1: AMD CPU Temperature Sensors (Family15h)

pchb9 at pci0 dev 25 function 4: vendor 0x1022 product 0x1604 (rev. 0x00)

pchb10 at pci0 dev 25 function 5: vendor 0x1022 product 0x1605 (rev. 0x00)

isa0 at pcib0

com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo

com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo

pckbc0 at isa0 port 0x60-0x64

acpicpu0 at cpu0: ACPI CPU

acpicpu0: C1: HLT, lat   0 us, pow     0 mW

acpicpu0: C2: I/O, lat 100 us, pow     0 mW

acpicpu0: P0: FFH, lat   5 us, pow  5752 mW, 2300 MHz

acpicpu0: P1: FFH, lat   5 us, pow  5293 mW, 2100 MHz

acpicpu0: P2: FFH, lat   5 us, pow  4347 mW, 1800 MHz

acpicpu0: P3: FFH, lat   5 us, pow  3638 mW, 1600 MHz

acpicpu0: P4: FFH, lat   5 us, pow  3105 mW, 1400 MHz

acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %

acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %

acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %

acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %

acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %

acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %

acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %

acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %

acpicpu1 at cpu1: ACPI CPU

acpicpu2 at cpu2: ACPI CPU

acpicpu3 at cpu3: ACPI CPU

acpicpu4 at cpu4: ACPI CPU

acpicpu5 at cpu5: ACPI CPU

acpicpu6 at cpu6: ACPI CPU

acpicpu7 at cpu7: ACPI CPU

acpicpu8 at cpu8: ACPI CPU

acpicpu9 at cpu9: ACPI CPU

acpicpu10 at cpu10: ACPI CPU

acpicpu11 at cpu11: ACPI CPU

acpicpu12 at cpu12: ACPI CPU

acpicpu13 at cpu13: ACPI CPU

acpicpu14 at cpu14: ACPI CPU

acpicpu15 at cpu15: ACPI CPU

timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0

ERROR: 3826 cycle TSC drift observed

uhub0 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1

uhub0: 6 ports with 6 removable, self powered

uhub1 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub1: 3 ports with 3 removable, self powered

uhub2 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub2: 3 ports with 3 removable, self powered

uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub3: 3 ports with 3 removable, self powered

uhub4 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub4: 3 ports with 3 removable, self powered

uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1

uhub5: 6 ports with 6 removable, self powered

uhub6 at usb6: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub6: 2 ports with 2 removable, self powered

atapibus0 at atabus0: 2 targets

IPsec: Initialized Security Association Processing.

cd0 at atapibus0 drive 0: <TSSTcorp CDDVDW SN-208FB, S1236YBG3002R2, SB00> cdrom removable

cd0: 32-bit data port

cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)

wd0 at atabus0 drive 1

wd0: <OCZ-VERTEX4>

wd0: drive supports 16-sector PIO transfers, LBA48 addressing

wd0: 238 GB, 496149 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors

wd0: 32-bit data port

wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)

cd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)

wd0(ixpide0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)

Kernelized RAIDframe activated

pad0: outputs: 44100Hz, 16-bit, stereo

audio0 at pad0: half duplex, playback, capture

boot device: wd0

root on wd0a dumps on wd0b

root file system type: ffs

uhidev0 at uhub1 port 1 configuration 1 interface 0

uhidev0: Logitech USB Keyboard, rev 1.10/64.00, addr 2, iclass 3/1

ukbd0 at uhidev0

uhidev1 at uhub3 port 3 configuration 1 interface 0

uhidev1: Winbond Electronics Corp Hermon USB hidmouse Device, rev 1.10/0.01, addr 2, iclass 3/1

ums0 at uhidev1: 3 buttons and Z dir

wsmouse0 at ums0 mux 0

uhidev2 at uhub3 port 3 configuration 1 interface 1

uhidev2: Winbond Electronics Corp Hermon USB hidmouse Device, rev 1.10/0.01, addr 2, iclass 3/1

ukbd1 at uhidev2

wskbd0 at ukbd0: console keyboard, using wsdisplay0

uhidev3 at uhub1 port 1 configuration 1 interface 1

uhidev3: Logitech USB Keyboard, rev 1.10/64.00, addr 2, iclass 3/0

uhidev3: 3 report ids

uhid0 at uhidev3 reportid 1: input=1, output=0, feature=0

uhid1 at uhidev3 reportid 2: input=1, output=0, feature=0

uhid2 at uhidev3 reportid 3: input=3, output=0, feature=0

wskbd1 at ukbd1 mux 1

wskbd1: connecting to wsdisplay0

wsdisplay0: screen 1 added (80x25, vt100 emulation)

wsdisplay0: screen 2 added (80x25, vt100 emulation)

wsdisplay0: screen 3 added (80x25, vt100 emulation)

wsdisplay0: screen 4 added (80x25, vt100 emulation)

ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1



Home | Main Index | Thread Index | Old Index