Subject: cdrecord-current question
To: None <>
From: Emre <>
List: tech-pkg
Date: 04/25/2000 16:43:24

I have a "Acer CRW6206A" cd burner, and I wanted to use cdrecord to burn some files onto
a CD.  Somehow when I run "cdrecord -scanbus" I get:

bash-2.04# cdrecord -scanbus
Cdrecord 1.8.1a01 (i386-unknown-netbsd1.4X) Copyright (C) 1995-2000 Jörg Schilling
cdrecord: No such file or directory. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.

Is this device supported?  I pasted my dmesg output below.  Has anyone gotten this to
work with this particular CD burner (or similar).  If so, I'd be more than thankful if
anyone could point me in the right direction.


Here's my dmesg (I'm running NetBSD-current, with the latest ports...I used
cdrecord-current...should I try the old cdrecord first? *wonders*):

NetBSD 1.4X (PLASMA) #0: Sat Apr 22 17:44:42 PDT 2000
cpu0: family 5 model 6 step 2
cpu0: AMD K6 (586-class)
total memory = 65152 KB
avail memory = 55804 KB
using 840 buffers containing 3360 KB of memory
BIOS32 rev. 0 found at 0xfb260
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT82C597 (Apollo VP3) Host-PCI Bridge (rev. 0x04)
ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3) PCI-AGP (rev.
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation & SGS Thomson Microelectric Riva 12
8 (rev. 0x22)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C586 (Apollo VP) PCI-ISA Bridge (rev. 0x47)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C586A IDE Controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <Maxtor 90845D4>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 8063 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 16514064 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <CRW6206A, , 1.2A> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
VIA Technologies VT82C586 (Apollo VP) Power Management Controller (miscellaneous brid
ge, revision 0x10) at pci0 dev 7 function 3 not configured
pcscp0 at pci0 dev 10 function 0
pcscp0: interrupting at irq 10
pcscp0: AM53C974, 40MHz, SCSI ID 7
scsibus0 at pcscp0: 8 targets, 8 luns per target
tlp0 at pci0 dev 11 function 0: Lite-On 82C169 Ethernet, pass 2.0
tlp0: interrupting at irq 12
tlp0: Ethernet address 00:a0:cc:53:8b:59
ukphy0 at tlp0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x001018, model 0x0021, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bktr0 at pci0 dev 12 function 0
bktr0: interrupting at irq 9
bktr0: buffer size 3555328, addr 0x690000
bktr: GPIO is 0x00fffffb
subsystem 0x0070 0x13eb
bktr0: Hauppauge Model 38061 B226
Hauppauge WinCast/TV, Philips NTSC tuner, remote control.
Brooktree product 0x0878 (miscellaneous multimedia, revision 0x02) at pci0 dev 12 fun
ction 1 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt1 at isa0 port 0x278-0x27b: polled
sb0 at isa0 port 0x220-0x237 irq 5 drq 1 drq2 5: dsp v4.13
audio0 at sb0: full duplex, mmap, independent
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask efc5 netmask ffc5 ttymask ffc7
scsibus0: waiting 2 seconds for devices to settle...
probe(pcscp0:0:0): max sync rate 10.00MB/s
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST51080N, 0913> SCSI2 0/direct fixed
sd0: 1030 MB, 4826 cyl, 4 head, 109 sec, 512 bytes/sect x 2109840 sectors
sd0: no disk label
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

DH/DSS key 0x69C2B37B/0xC34F4717 | 
Fingerprint 4FAF 6F70 B407 08AE 86EF AC0E 130E 932C 69C2 B37B