Subject: bge0: watchdog timeout -- resetting/bge0: block failed to stop
To: None <tech-net@netbsd.org>
From: Rimantas Petrauskas <rimantas@remo.lt>
List: tech-net
Date: 03/23/2005 15:20:11
Hello,

today i noticed the following error messages several times in
/var/log/messages file:

Mar 23 14:39:09 thunder /netbsd: bge0: watchdog timeout -- resetting
Mar 23 14:39:09 thunder /netbsd: bge0: block failed to stop: reg 0x3400,
bit 0x00000002
Mar 23 14:39:09 thunder /netbsd: bge0: block failed to stop: reg 0x2400,
bit 0x00000002
Mar 23 14:39:09 thunder /netbsd: bge0: block failed to stop: reg 0x1400,
bit 0x00000002
Mar 23 14:39:09 thunder /netbsd: bge0: block failed to stop: reg 0xc00,
bit 0x00000002
Mar 23 14:39:09 thunder /netbsd: bge0: block failed to stop: reg 0x3c00,
bit 0x00000002
Mar 23 14:39:09 thunder /netbsd: bge0: block failed to stop: reg 0x4c00,
bit 0x00000002

is it possible that netbsd driver for this ethernet card has bugs?

in configuration bge0 belongs to bridge0 also as bge1, bge2 and ex0. Other
cards seems to work without problems.

thanks for the answer

---------dmesg.boot---------------
NetBSD 2.0.1 (thunder: 1.1 $) #1: Wed Mar 16 03:05:15 EET 2005
        root@thunder:/usr/src/sys/arch/i386/compile/THUNDER
total memory = 1023 MB
avail memory = 998 MB
BIOS32 rev. 0 found at 0xfd7d1
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Xeon (686-class), 3056.69 MHz, id 0xf29
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: calibrating local timer
cpu0: apic clock running at 132 MHz
cpu0: 16 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel Xeon (686-class), 3056.49 MHz, id 0xf29
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu1: L2 cache 512 KB 64B/line 8-way
cpu1: ITLB 4K/4M: 64 entries
cpu1: DTLB 4K/4M: 64 entries
ioapic0 at mainbus0 apid 14 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0 apid 13 (I/O APIC)
ioapic1: pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0 apid 12 (I/O APIC)
ioapic2: pa 0xfec02000, version 11, 16 pins
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <IBM   ,SERONYXP,00001000>, AslId <IBM ,45444f43>
acpi0: SCI interrupting at int 5
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0303 at acpi0 not configured
PNP0F13 at acpi0 not configured
PNP0700 at acpi0 not configured
PNP0501 at acpi0 not configured
PNP0003 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: using exception 16
PNP0C02 at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0A03 at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ServerWorks CMIC-LE PCI/AGP bridge (rev. 0x33)
pchb1 at pci0 dev 0 function 1
pchb1: ServerWorks CMIC-LE PCI/AGP bridge (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: ServerWorks CMIC-LE PCI/AGP bridge (rev. 0x00)
vga0 at pci0 dev 1 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ex0 at pci0 dev 2 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt
(rev. 0x78)
ex0: interrupting at ioapic1 pin 0 (irq 3)
ex0: MAC address 00:04:75:e0:e1:30
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pchb3 at pci0 dev 15 function 0
pchb3: ServerWorks CSB5 ISA bridge (rev. 0x93)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks CSB5 IDE Controller (rev. 0x93)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
rccide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at rccide0 channel 0
rccide0: secondary channel configured to compatibility mode
rccide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at rccide0 channel 1
ServerWorks OSB4/CSB5 USB Host Controller (USB serial bus, interface 0x10,
revision 0x05) at pci0 dev 15 function 2 not config
ured
pcib0 at pci0 dev 15 function 3
pcib0: ServerWorks product 0x0225 (rev. 0x00)
pchb4 at pci0 dev 17 function 0
pchb4: ServerWorks CIOB-X2 PCI-X bridge (rev. 0x05)
pci1 at pchb4 bus 1
pci1: i/o space, memory space enabled
mpt0 at pci1 dev 1 function 0: LSI Logic 53c1030 Ultra320 SCSI
mpt0: interrupting at ioapic1 pin 6 (irq 9)
scsibus0 at mpt0: 16 targets, 8 luns per target
bge0 at pci1 dev 2 function 0: Broadcom BCM5701 Gigabit Ethernet
bge0: interrupting at ioapic1 pin 2 (irq 10)
bge0: pcistate failed to revert
bge0: ASIC BCM5701 B5 (0x0105), Ethernet address 00:0a:5e:44:27:23
brgphy0 at bge0 phy 1: BCM5701 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
pchb5 at pci0 dev 17 function 2
pchb5: ServerWorks CIOB-X2 PCI-X bridge (rev. 0x05)
pci2 at pchb5 bus 2
pci2: i/o space, memory space enabled
bge1 at pci2 dev 1 function 0: Broadcom BCM5703X Gigabit Ethernet
bge1: interrupting at ioapic1 pin 8 (irq 11)
bge1: ASIC BCM5703 A2 (0x1002), Ethernet address 00:0d:60:d5:f5:02
brgphy1 at bge1 phy 1: BCM5703 1000BASE-T media interface, rev. 2
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge2 at pci2 dev 2 function 0: Broadcom BCM5703X Gigabit Ethernet
bge2: interrupting at ioapic1 pin 9 (irq 3)
bge2: ASIC BCM5703 A2 (0x1002), Ethernet address 00:0d:60:d5:f5:03
brgphy2 at bge2 phy 1: BCM5703 1000BASE-T media interface, rev. 2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
ioapic2: enabling
ioapic1: enabling
ioapic0: enabling
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <CD-224E, , 2.9B> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(rccide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
(Ultra/33) (using DMA data transfers)
sd0 at scsibus0 target 0 lun 0: <IBM-ESXS, ST336753LC    FN, B85D> disk fixed
sd0: 34715 MB, 31310 cyl, 4 head, 567 sec, 512 bytes/sect x 71096640 sectors
sd0: sync (6.25ns offset 63), 16-bit (320.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <IBM-ESXS, ST336753LC    FN, B85D> disk fixed
sd1: 34715 MB, 31310 cyl, 4 head, 567 sec, 512 bytes/sect x 71096640 sectors
sd1: sync (6.25ns offset 63), 16-bit (320.000MB/s) transfers, tagged queueing
ses0 at scsibus0 target 8 lun 0: <IBM, 25P3495a S320  1, 1> processor fixed
ses0: SAF-TE Compliant Device
ses0: async, 8-bit transfers
raid0: RAID Level 1
raid0: Components: /dev/sd0a /dev/sd1a
raid0: Total Sectors: 71096448 (34715 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
cpu1: CPU 1 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
----------------------------------------------------------------------



-- 
Pagarbiai,
Rimantas Petrauskas,
UAB "Remo televizija"
Tinklo administratorius
Mob. tel.: 8-685-74915
E-mail: rimantas@remo.lt