On 11.05-14:31, Christoph Kaegi wrote:
> 
> I was just about to send off my mail, when I found kern/20363.
> 
> Is anybody working on this? Will it be fixed for NetBSD 2.0?

To answer my own question: (I should check the PR Database, not google)
The PR is fixed, but my problem remains.

Can anybody help me troubleshoot this?

Thanks 
Chris

> -------------------------------------- 8< --------------------------------------
> 
> 
> I have the following nic in my Dell Latitude D600 Notebook
> with NetBSD 1.6.2_STABLE:
> 
> -------------------------------------- 8< --------------------------------------
> bge0 at pci2 dev 0 function 0: Broadcom BCM5702X Gigabit Ethernet
> bge0: interrupting at irq 11
> bge0: ASIC BCM5703 A2, Ethernet address 00:0d:56:df:c3:85
> brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
> -------------------------------------- 8< --------------------------------------
> 
> I wanted to check, if it is possible to use NetBSD as
> a Firewall between several vlans running over just
> one trunkport.
> 
> The bge(4) manpage says, vlans are not supported
> on bge(4) interfaces.
> The code from if_bge.c looks to me (as a non expert)
> like vlans could be supported.
> 
> >From what I tried, I'd say: it basically works. I have
> connected  a cisco 802.1q trunk port to my notebook
> and sucessfully created several vlan interfaces to my
> physical bge interface.
> 
> I can ssh and telnet around and with tcpdump I can see
> traffic on the connected vlans.
> 
> So far so good.
> 
> But when I startup links -g and try to load www.netbsd.org for example,
> I get a timeout.
> 
> On the Firewall before the proxy it looks like:
> -------------------------------------- 8< --------------------------------------
>   1   0.000000 1.2.3.4 -> proxy TCP 65498 > 8080 [SYN] Seq=2288912255 Ack=0 Win=16384 Len=0
>   2   0.000507 proxy -> 1.2.3.4 TCP 8080 > 65498 [SYN, ACK] Seq=1040683047 Ack=2288912256 Win=24616 Len=0
>   3   0.001827 1.2.3.4 -> proxy TCP 65498 > 8080 [ACK] Seq=2288912256 Ack=1040683048 Win=17520 Len=0
>   4   0.002480 1.2.3.4 -> proxy HTTP GET http://www.netbsd.org/ HTTP/1.1
>   5   0.003974 proxy -> 1.2.3.4 TCP 8080 > 65498 [ACK] Seq=1040683048 Ack=2288912812 Win=24616 Len=0
>   6   0.007703 proxy -> 1.2.3.4 HTTP HTTP/1.0 200 OK
>   7   0.007833 proxy -> 1.2.3.4 HTTP Continuation
>   8   0.007925 proxy -> 1.2.3.4 HTTP Continuation
>   9   0.009248 1.2.3.4 -> proxy TCP 65498 > 8080 [ACK] Seq=2288912812 Ack=1040683048 Win=17520 Len=0
>  10   3.374421 proxy -> 1.2.3.4 HTTP HTTP/1.0 200 OK
>  11   7.324341 proxy -> 1.2.3.4 HTTP HTTP/1.0 200 OK
>  12  10.124283 proxy -> 1.2.3.4 HTTP HTTP/1.0 200 OK
> -------------------------------------- 8< --------------------------------------
> 
> Packet 9 acks packet 6, but not packet 8.
> So it seems like the client didn't receive packet 7 and 8.
> 
> I'm not sure, where I should start searching.
> 
> Can anybody help me?
> 
> Thanks
> Chris
> 

-- 
----------------------------------------------------------------------
Christoph Kaegi                                           kgc@zhwin.ch
----------------------------------------------------------------------