Hi folks,

  I've been trying to get a SureCom EP-427 (an NE2000 compatible
PCMCIA ethernet card) up and running, so far, without much luck.
After compiling a fairly current 1.3J kernel with the necessary
CIS info, here is what I get:


pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 10
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: TAMARACK, Ethernet, A, 004743118001
pcmcia0: Manufacturer code 0xffffffff, product 0xffffffff
pcmcia0: function 0: network adapter, ccr addr 3f8 mask 3
pcmcia0: function 0, config table entry 32: I/O card; irq mask 9e38; iomask a, iospace 300-31f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pcmcia0: function 0, config table entry 33: I/O card; irq mask 9e38; iomask a, iospace 320-33f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pcmcia0: function 0, config table entry 34: I/O card; irq mask 9e38; iomask a, iospace 340-35f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pcmcia0: function 0, config table entry 35: I/O card; irq mask 9e38; iomask a, iospace 360-37f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
ne0 at pcmcia0 function 0 port 0x340-0x34f port 0x350-0x35f
ne0: Surecom EP-427 Ethernet
ne0: where did the card go?


  The card works (as a standard NE2000 compatible card) under Lin*x,
but I have no idea, of course, what quirks they are using to get this
working ...

  Ideas anyone?

  Cheers
      ,
   Rene